Wire Clamp JAWS double nuts for ZAZA2 plates
Tighten the nuts alternately without excess.The tightening of the nuts must be uniform
Serrez les écrous alternativement sans excès.Le serrage des écrous doit être uniforme
Tightening torque/Couple de serrage : 45Nm
TECHNICAL SHEET 2023
NOTICE TECHNIQUE 2023
WLL 6 kN
STANDARDS
EN 15567-1
or 1/2"
Security
cable
Metal Core
JAWS
= 45 Nm
OIL
SLIP RESISTANCE
2450 daN
It is important to observe the fitting orientation !
Il est important de respecter le sens de montage !
RESISTANCE
AU GLISSEMENT
Ne convient pas
au câble 1x19
Is not suitable
to 1x19 cable
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Catalina 350 Owner's manual
-
Catalina Capri 22 Owner's manual
-
BENETEAU 461 Owner's manual
-
BENETEAU 2003 Oceanis 411 Owner's manual
-
BENETEAU 331 Owner's manual
-
Hunter Marine 146 Owner's manual
-
Bavaria VISION 42 Sales Manual
-
Bodet Scorepad User manual
-
Seawind 1160 Lite Owner's manual
-
3M SafeLok Reusable Anchorage Device 4011 1 EA/Case Operating instructions
