HP Pavilion Dual Display Stand Installation guide

The information contained herein is subject to change without notice. The only warranties for HP products and

services are set forth in the express warranty statements accompanying such products and services. Nothing herein

should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or

omissions contained herein.

First Edition: October 2017

0–140°

30°

65°–15°

360°

10 kg (22.05 lbs)

735 mm (28.94”)

863 mm (33.98”)

501 mm

(19.72”)

621 mm

(24-25”)

120 mm

(4.72”)

148 mm

(5.83”)

20 mm (.78”)–

60 mm (2.36”)

Maximum weight load: 10 kg (22.05 lbs)

WARNING: This mounting system is intended for use only with the maximum

weight indicated (10 kg/22.05 lbs). Using this device with products heavier than

the maximum weight indicated may result in the collapse of the mounted assembly and

its accessories, causing possible injury.

CAUTION: This mounting device is intended for use with a product weighing not

more than 10 kg (22.05 lbs) and having dimensions that will permit the product





included 3 mm wrench to increase or decrease tension until the motion is

smooth. To increase tension, turn the wrench clockwise. To decrease tension,

turn the wrench counterclockwise.



Replace this box with PI statement as per spec.

L10610-001

*L10610-001*