HP OfficeJet Enterprise Color MFP X585 series Operating instructions

HP Officejet Enterprise Color X555 and MFP X585 - Repackaging

instructions for product returns

(X585 MFP shown below. X555 printer requires minimal taping.)

When possible, use the shipping materials that the replacement product shipped with.

1. Install the Orange Print bar cap and tape in place

NOTE: If the Orange Print bar cap is not available, make sure to secure the Print bar with tape (put extra tape if needed)

2. ADF/Scanner views of the product taping including the foam padding in the Scanner area.

3. Front view of the product taping

4. Left side view of the product taping

5. Rear view of the product taping

6. Right-side view of the product taping

7. Place the product in the plastic bag and place the product in the box.

 This is usually a two person lift process

8. Repackage using foam pieces and other cardboard parts.

 IMPORTANT: Please include all materials that show the problem details.

This manual is also suitable for