Atronix ATX 3540 User manual

Brand: Atronix

Model: ATX 3540

Category: Security cameras

Type: User manual

ATX 3540

CÂMERA ATX 3540

ATX 3540

Forword

The products have got the FCC certificate, and marked as A grade products, which are

designed for reasonable protection when infringing in business or somewhere, the products

ill give off video wave, please operate following the instruction, do so at your own risk.

Notice

1. Please do not apart or assemble it, or we will not duty on repairment.

2. Please keep the working environment clean, it damped or dropped in water in case,

please cut off the power, or the circuit will be broken and cause accident easily.

3. During the period of using cameras, please clean the lens timely to make sure a

better image.

4. Do not turn cameras to face sun directly, and avoid of the circumstance of strong

light, spotlight and glisten when cameras are working.

5. Please use cameras under the requested temperature, humidity and power supply,

the range is 14F-122F, under 85% humidity, for power supply, please check in

instruction.

6. To avoid of falling down, please do not put cameras on unstable three-legged

bracket or some other objects which fall down easily, or it will hurt kids or adults, the

cameras will be broken at the same time.

7. The installation of cameras must be fast, or it will fall down and hurts people. Do not

place the cameras on radiator or resistance heater.

8. The function switcher on rear panel has been setted as default mode, if not

necessary, please do not change it.

To avoid of fire and electric accident, please do not put our cameras in humidity

or the place could be wet easily.

Please be carefull when seeing the attachment with the symbol of dangerous

voltage, because the attachment may cause serious electric shock.

Notice

: To avoid of electric shock and fire,

please do not use the power supply which is

not listed on instruction.

ATX 3540

Any changes or adjustment which are not approved by our company will affect the

operation authorization of users.

Pick-Up Device 1/3” Sony Super HAD High Resolution CCD

Signal Processor D.S.P (Digital Signal Processor)

Signal System NTSC/PAL

Resolution 520 Lines

Minimum Illumination 0.3 Lux

Control OSD

Electronic Shutter 1/50(1/60)~1/100,000

Lens Mount C / CS

Basic Function Lens Selection (DC / VIDEO / Manual)

Shutter Selection (ESC / Manual / FLK)

ATW (Auto / Manual) Selection

BLC ( Off / Baixo / Médio / Alto) Selection

AGC ( Off / Baixo / Médio / Alto) Selection

DNR ( Off / Baixo / Médio / Alto) Selection

Sens-Up (Off / AUTO: 2X ~ 128X) Selection

Added Function Camera ID ON/OFF

Motion Detection ON/OFF (4 Zone, Position / Size / Sensitivity)

Privacy Zone ON/OFF (4 Zone, Position / Size / Tone)

Mirror ON/OFF

Sharpness ON/OFF

Reset Function

DAY& NIGHT (Electronic Conversion)

Watch Dog

White Balance Auto (1,800ºK~10,500ºK)

S/N Ratio > 67 dB

Gamma Correction > 0.45

Operating Temperature -10ºC a 50ºC

Sync. System Internal

Video Output 1.0Vp-p/75Ω

Power Supply DC 12V; AC24V; AC90~260V;

DC 12V/AC24V Dual Power

Power Consumption 3.5 W. (Max.)

Product design and specifications subject to change without prior notice

Fault phenomenon solution (ONE)

If you encountered in the use of cameras, please refer to the following note, if that can not

help you solve the problem, please contact the Division I authorized professionals for

processing.

tice

: To avoid the risk of electric shock,

please do not open the cover and the rear

panel if your are not expert.

ATX 3540

Troubleshooting Products solutions

No video output power

supply

Please check power lines, video camera and

monitor the connection between the line is

correct

Not normal work Please check whether cameras will be

connected to the correct DC 12V power

Image display is so light Please adjust the function display contrast, if

the camera under a bright light exposure, the

need to change the position of the camera

The image is too dark Please to the display brightness adjustment.

Self Test Failure

Fault phenomenon solution (TWO)

If you encountered in the use of cameras, please refer to the following note, if that can not

help you solve the problem, please contact me authorized by the Secretary for

professionals dealing with (the part of this machine operation will cover from the ball

machine can operate down).

Troubleshooting Products solution

No video output power supply Please check power lines, video camera and monitor

the connection between the line is correct

Not normal work Please check whether cameras will be connected to the

correct DC 12V power

Image display is so light Please adjust the function display contrast, if the

camera under a bright light exposure, the need to

change the position of the camera

The image is too dark Please do the display brightness adjustment

Being unable to open automatic

aperture lens automatic

aperture VIDEO

Check VIDEO/DC and EE/AI settings are correct (AI

VIDEO stalls and stalls), behind with a screwdriver

adjustment board LEVEL conditioning button to see

whether they break into DC automatic aperture: Check

VIDEO / DC switching and EEIA settings are correct

(DC AI stalls and stalls), behind with a screwdriver

adjustment board LEVEL conditioning button to see

whether they can open

Apparent color rolling Inspection AWB switch settings are correct (OFF

button)

Poor illumination Please do inspection whether the AGC switch settings

are correct (OFF button).

Brightness overly bright Please do inspection whether EE / AI switch settings

are correct (AI button)

Contrast bad Please checks whether BLC switch settings are correct

(OFF button)

ATX 3540

SERVICE MANUAL

The lightning flash with arrowhead symbol, within an equilateral triangle, is

interned to alert the user to the presence of uninsulated “dangerous voltage” within

the product´s enclosure that may be of sufficient magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to

the presence of important operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

▲ Before attempting to connect this product, please read and keeps this manual for future use.

Safety Warning

1. Do not open the cover, it may cause electric shock.

Ask a qualified service person for maintenance when you encounter any problems.

2. Installed the camera away from TV, radio transmitter, magnet, electric motor, transformer,

audio speakers because the magnetic fields generate from above devices will distort the

video image.

3. Place this camera on a solid base. Installed the camera away from stoves, or other heat

generating devices as the high temperature could cause deformation, discoloration or other

damages of the camera.

Install the camera at where the temperature range will stay between 0ºC to 50ºC (32ºF to

122ºF)

4. Do not expose and operate the camera in the rain and humid areas.

5. Only use soft dry cloth to clean the camera. Also use lens tissue or cotton tipped applicator

and ethanol to clean CCD sensor and camera lens.

6. When the camera is not in use, put the cover cap on the lens mount. Please do not touch the

surface of CCD by bare hand.

ATX 3540

Introduction

This Full Function series CCD cameras introduce a new level of high picture quality through the

digital signal processing LSI´s technology for advanced video surveillance. It provides most

reliable and accurate color picture in security industries.

Main Features

• 540TV Lines Ultra High Resolution.

• High Sensitivity: SONY 1/3” Super HAD CCD image sensor.

• O.S.D. (On Screen Display): Controlled by selecting menu displayed on the monitor screen.

• D.N.R. (Digital Noise Reduction).

• Day & Night Mode: Automatically switch.

• Powerful Functions: DC/Video drive lens, B.L.C., Flickerless, White Balance control,

Mirror, Motion Detection, Sens-Up, Sharpness, Privacy, Camera ID.

• Built-in anti-aliasing and IR-pass (850nm) optical filter. (XC229SR).

Installation Instructions

(1) Remove the cap from the lens mount.

(2) Select the C mount lens (with mount ring) or CS mount lens.

(3) Screw and fasten the lens into the lens mount.

(4) Connect the video output wire between monitor and camera through 75ohm type coaxial

cable.

(5) Connect the power cord input.

(6) When monitor shows the picture, please adjust the focus and iris of the lens to obtains the

best image according to the following procedures:

• Choose the objects at a distance about 5 ~ 10 meter away.

• Loosen the mount lens fixing screw (use L. wrench), if necessary.

• Turn the lens and the mount together until image is clear.

• Screw the mount to camera.

(7) Fix camera to the bracket, if necessary.

ATX 3540

Rear Panel Switches (DC12V, optional AC type)

SET UP MENU

LENS * Manual * DC/VIDEO

SHUTTER & SPEED * ESC * MANUAL * FLK

WHITE BALANCE * ATW * AWC * MANUAL

* OFF * LOW * MIDDLE B.L.C (BACK LIGH COMPENSATION)

* HIGH

* OFF * LOW * MIDDLE AGC (AUTO GAIN CONTROL)

* HIGH

* OFF * LOW * MIDDLE D.N.R. (DIGITAL NOISE REDUCTION)

* HIGH

* CAMERA ID * COLOR

* SYNC * MOTION DETECTION

* PRIVACY * MIRROR

* SHARPNESS * RESET

SPECIAL

* RETURN

EXIT

MENU On Screen

ATX 3540

IRIS Level Control

The warranty

Respected customers, thank you for your use of the company´s products. In order to

strengthen the after-sales service to customers, special warranty final version of the series,

please read carefully and make valuable comments and suggestions.

1. A purchase of the company´s products sold since 2001 to the date of the free

warranty service. If the purchase of products from more than a year from the date of

the warranty period, the company will depend on the product fault collect, as

appropriate, the cost of spare parts.

2. Repairs properly packaging products requested delivery. The transportation process

if damaged or lost, the company will not be responsible for.

3. Free warranty period occurred in the following matters, the company has the

discretion charge the cost of materials, service charges:

1) Users of fault or cause undue harm;

2) Electric shocks or improper installation led to the burning of the accident;

3) Self-maintenance, and demolition of the fault;

4) Product warranty has signed damaged;

4. Please do the installation of this products after reading the product´s instruction

clearly

Atronix ATX 3540 User manual

Brand: Atronix

Model: ATX 3540

Category: Security cameras

Type: User manual

Download PDF

report

Atronix ATX 3540 User manual

Atronix ATX 3540 User manual

Other documents