Shenzhen 1080P Owner's manual

Road Safety Guard

Instruction Manual

Thank you for purchasing 1080P portable DVR from

our company. In order to help you operate it correctly,

please read this instruction carefully before

using

Product Picture and Function

1. HDMI Slot 9 .Lens

2. USB Slot 10.Speaker

3. Working Indicator (blue) 11. Microphone

charging indicator (red) 12. Holder slot

4. 2.8’’ TFT LCD 13. On/Off

5. Mode Button 14. Rec/Snap

6.Meau Button 15. Battery Cover

7.Up Button 16. TF Card Slot

8. Down Button 17. Battery Slot

Attached accessories

 User manual Camera holder USB cable Rechargeable Li-ion battery

USB Car charger (Include the adaptor which can 12V/24V transfers to 5.5V)

Two power options

(A) Use rechargeable Li-ion battery

DVR can be activated after it has been placed on the vehicle by pressing the ON/OFF power

switch ⒀ and turn off by pressing it again.

Charging: Connect with USB cable or USB car charger, the indicator will display red and

convert to no light when it is full

(B) Connect with USB car charger

DVR will record automatically when the car started, turn off and save the last file after the

car stops .

Note:only use the output power for 5.5V-7V

Video Mode

DVR will enter into the defaulted recording mode when turned on, the work indicator flash

blue and indicate it is recording. The recorded files are saved in the TF card. To stop, please

press Rec button or ending when car stops, the work indicator won’t flash.

Camera Mode

Turn on the DVR and press the Mode button ⑤ to enter into the camera mode. To take picture

by pressing Snap Button (14) . Press the Meau Button ⑥ to set the picture resolution from

1280x960 / 1600x1200/2048x1536 and confirm it by pressing REC button.

Preview and Delete

Turn on the DVR ,then press Mode button ⑤ twice to enter into Preview Mode. Press Up ⑦ or

Down ⑧ to select the previewed file and enter into the index by pressing REC button (14). If it is

video file,it can play or stop by pressing REC button .(e.g. :Index is named Y/M/D and file is

named DR H/M/S,if want to preview the file 2010/01/01 10:28:08,enter into index 2010-01-01

and select DR 102808 to play).If you want to delete the files, press the Meau button ⑥ to enter

into the Delete Mode. And then press UP ⑦ or DOWN ⑧ to select Delete Current / Delete All,

confirm to delete it or exit from delete interface by pressing REC button (14) .If you want to

format ,please select and confirm Format Memory by REC button.

Function Setting

Turn on the DVR, then Press the Meau button

○

6 to enter into the setting interface. To confirm

the operation, press the REC button (14) and select by UP/DOWN for the following setting .Press

Meau button

○

6 to exit after finished all the settings.

1. Video Resolution: VGA(640*480Pixels) 720P(1280*720Pixels) 1080P(1920*1080Pixels）

2. Audio Recording: ON/OFF.If choose OFF, there will be no audio when recording.

3. Volume:From 0 to 7

4. Motion detection: Choose ON( it will display on the screen ) /OFF. When choose ON,

it will record automatically if there is an object movement in front of the car ,the

recording time is according to the setting time,e.g.setting 2 minutes as recording time,the

recording time will last 2 minutes if there is an object movement,stop recording if no

movement after 2 minutes and continue recording if still have movements.

5. FPS:10FPS/ 20FPS/30FPS

6. Recording Time: 2 minutes /5 minutes/10 minutes /OFF.

7. LCD Back light: 15 seconds/30 seconds /60 seconds/ON. When select (15/30/60) seconds,

the LCD will turn off automatically after 15/30/60 seconds of inactivity. If select ON, the

LCD will turn on all the time.

8. Date Stamp: Date&Time Stamp/No Stamp. When choose No Stamp, Video will not have

date and time display

9. Date/Time: Y/M/D H/M/S

Press REC button (14) to enter into the date and time setting, then press Up button ⑦ or

Down button ⑧ to adjust the date and time, press Rec button to enter into the next

setting and confirm the setting by pressing REC button ( 14).

10. Language: English/ Chinese Simplified /Chinese Traditional/ /Portuguese /Russian

/Japanese/Korean

11. Fenquency:50Hz/60Hz

12. Default Setting: YES/NO. When choose YES, it will restore to factory-default setting

13. Version: Show the software version number

USB Mode

Connect the DVR with computer through USB cable. There will appear removable disk in

［MY COMPUTER］. The recorded files are stored at the DVR index,the file is placed relevant

Y/M/D index according recording time and is named by DR H/M/S. At the moment, the files

can be downloaded to the computer.

Preview the files on HD TV

Connect the DVR with the HD TV through HDMI cable and turn on the DVR, it will enter into

the preview mode automatically. The operating steps are the same with previewed on the

screen.

Notes

1.Please insert TF card before recording

2.Please adjust the time display before recording.If not set a time,the DVR can not record.

3.The DVR will record in cycle if choose 2/5/10minutes as the storage time. When the storage

medium is full, it will record from the beginning and erase over the previously recorded materials

automatically. If choose off, when the storage medium is full, it shows CARD FULL and stop

recording.

4.Please use the attached USB car charger to power the DVR. It contains the adaptor which can

convert 12V/24V to DC 5.5V.If the voltage over 5.5V, it will burn the DVR.

5.When press Rec (14) couldnot stop recording,please check whether set the Motion Detection is

ON.If yes,please choose OFF.

Technical Specifications

1.Video Resolution: VGA (640*480Pixels) 720P(1280*720Pixels) 1080P（1920*1080）

2.Picture Resolution：1280X960 / 1600X1200 / 2048X1536

3.Cycle recording without time interval, there is no blind area when recording, namely there is no

pause when recoding

4. Storage file automatically when accidentally power off,it storages file automatically every 10

seconds when recording.

5.Video Format:H.264

6.Power Supply: Rechargeable li-ion battery and 12V/24V USB car charger

7.Support TF card: 2GB-32GB

8.Microphone: can record sound

9.Interface: HDMI & USB2.0

10. Display:2.8’’LCD Monitor

No further notice will be given for any modification of the technical specifications

Shenzhen 1080P Owner's manual

Shenzhen 1080P Owner's manual

Other documents