Panasonic TX32LM70F Operating instructions

Category
LCD TVs
Type
Operating instructions

This manual is also suitable for

TV
REC
VCR DVD
VCR
TEXT
N
EXIT
TV/AVGUIDE
F.P. INDEX HOLD
123
456
789
C
0
PROGRAMME
DIRECT TV REC
ASPECT
MENU
OK
Operating Instructions
Wide LCD TV
English
Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
Model No. TX-26LM70F
TX-32LM70F
2
Turn your own living room into a movie theatre!
Experience an amazing level of multi-
3
Viewing Advanced FAQs, etc.Quick Start Guide
media excitement
Enjoy rich multi-media
Camcorder
VCR
DVD player
DVD recorder
Set top box
Contents
Safety Precautions ······································ 4
(Warning / Caution)
Notes ··························································· 5
Maintenance················································5
Be Sure to Read
Advanced Features
How to Use Menu Functions ·····················14
(picture, sound quality, etc.)
Editing and Setting Channels
······················ 16
External Equipment ···································18
(Q-Link / VIERA Link / Connections)
Basic Features
Watching TV ·············································· 10
Watching Videos and DVDs ······················ 11
Viewing Teletext ········································ 12
Enjoy your TV!
Technical Information ································24
FAQs ························································· 27
Licence ······················································29
Specifi cations ············································ 29
FAQs, etc.
Accessories / Options
·········· 6
Identifying Controls
··············· 7
Connection
································ 8
Auto Setup
································· 9
Quick Start Guide
Amplifi er with
Speaker system
4
Safety Precautions
If you fi nd any
abnormality, remove
the mains plug immediately!
(such as strange smell or smoke)
Keep liquids away from the TV
To prevent damage which may result in fi re or
shock hazard, do not expose this appliance to
dripping or splashing.
Do not place containers with water (fl ower vase,
cups, cosmetics, etc.) above the set. (including on
shelves above, etc.)
AC 220-240 V
50 Hz
Do not remove covers
NEVER modify the unit yourself
(High-voltage components may cause serious
electrical shock.)
Have the unit checked, adjusted, or repaired at
your local Panasonic dealer.
Do not place foreign objects
inside the unit
Do not let any objects drop into the unit through the air
vents (fi re or electrical shock may result).
Using an unauthorized stand or other fi xtures may
make the unit unstable, risking injury. Be sure to
ask your local Panasonic dealer to perform setup.
Use optional stands / mounts (p. 6).
Use only the dedicated stands /
mounting equipment
Handling the mains plug and lead
Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause fi re.)
Ensure that the mains plug is easily accessible.
Do not touch the mains plug with a wet hand. (This may cause electrical shock.)
Do not damage the mains lead. (A damaged lead may cause fi re or electrical shock.)
Do not move the TV with the lead plugged in the socket outlet.
Do not place a heavy object on the lead or place the lead near a high-temperature object.
Do not twist the lead, bend it excessively, or stretch it.
Do not pull on the lead. Hold onto the mains plug body when disconnecting lead.
Do not use a damaged mains plug or socket outlet.
Warnings and Precautions
Do not place the TV on an unstable
surface
Do not expose to direct sunlight
and other sources of heat
Avoid exposing the TV set to direct sunlight and other
sources of heat. To prevent fi re never place any type
of candle or naked fl ame on top or near the TV set.
5
Blocked ventilation by curtains,
etc. may cause overheating, fi re
or electrical shock.
Allow suffi cient space around
the unit for radiated heat
10
10
6
10
7
(Cleaning an energized unit may cause electrical shock.)
When cleaning the TV unit, remove the
mains plug
Remove the mains plug from the wall
socket when TV is not in use for a pro-
longed period of time. Remove the mains
plug from the wall socket before connect-
ing or disconnecting any leads.
(cm)
Do not block the rear air vents
Maintenance
Display panel
Cabinet
Mains plug
Daily care: Gently wipe the surface clean of dirt by using a soft cloth.
Detail: Wipe the surface clean using a soft cloth dampened with clean water or water containing a small amount of
neutral detergent. Then, using a soft dry cloth, evenly wipe the surface clean until it is dry.
Daily care: Wipe the surface clean using a soft dry cloth.
Detail: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent. Then, wring
the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.
Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to fi re or electrical shock.)
First, remove the mains plug from the socket outlet.
Caution
The surface of the display panel has been specially treated and may be easily damaged.
Do not tap or scratch the surface with your fi ngernail or other hard object.
Use care not to subject the surface to bug repellent, solvent, thinner, or other volatile substances
(this may degrade surface quality).
Caution
Use care not to subject the TV unit's surfaces to detergent.
(A liquid inside the TV unit could lead to product failure.)
Use care not to subject surfaces to bug repellent, solvent, thinner, or other volatile substances
(this may deteriorate the surface by peeling the paint).
Do not allow the cabinet to make contact with a rubber or PVC substance for a long time.
This TV will still consume some power even in the
Standby mode, as long as the mains plug is still
connected to a live socket outlet. On /Off switch
see page 7.
Notes
Electronic equipment
In particular, do not place video equipment too close
the TV (electromagnetic interference may distort
images / sound).
Equipment with an infrared sensor
Remote Controller of this TV also emits infrared
rays (this may affect operation of other equipment).
Keep the TV away from this equipment
Adjust the LCD panel to your desired
angle
15° 15°
(View from the top)
Do not expose your ears to excessive
sound pressure from headphones.
Irreversible damage can be caused.
6
123
456
789
0
OK
C
TV
N
+
-
-
+
Optional accessories
Wall-hanging
bracket
TY-WK32LX20W
Caution
In order to maintain the unit’s performance and safety, be
absolutely sure to ask your dealer or a licenced contractor to
secure the wall-hanging brackets.
Handle the TV carefully during installation since subjecting it to
impact or other forces may cause product damage.
Take care when fi xing wall brackets to the wall.
Always ensure that there are no electrical cables or pipes in the
wall before hanging bracket.
Installing remote's batteries
1
Pull
open
Hook
2
Note the correct
polarity (+ or -)
Close
Caution
Incorrect installation may cause battery
leakage and corrosion, resulting in
damage to the remote control unit.
Do not mix old and new batteries.
Do not mix different battery types (such as
alkaline and manganese batteries).
Do not use rechargeable (Ni-Cd) batteries.
Do not burn or breakup batteries
(see page 32).
Attaching the clamper
Do not bundle the RF cable and mains lead together (could
cause distorted image).
Fix cables with clampers as necessary.
When using the optional accessory, follow the option’s
assembly manual to fi x cables.
To tighten:
Keep the
knob pressed
Rear of the TV
To loosen:
Bundle the cables
Batteries for the Remote
Control Transmitter
(2)
R6 (UM3)
Accessories / Options
Clamper
Remote Control
Transmitter
EUR7651030A
Operating Instructions
Pan European Guarantee Card
Standard accessories
Check that you have the accessories and items shown
7
Quick Start Guide
TV
REC
VCR DVD
VCR
TEXT
N
EXIT
TV/AVGUIDE
F.P. INDEX HOLD
123
456
789
C
0
PROGRAMME
DIRECT TV REC
ASPECT
MENU
OK
Identifying Controls
Function
select
Increases or decreases the programme position by
one. When a function is already displayed, press to
increase or decrease the selected function.
When in Standby mode, switches TV On.
Backlight Automatic Tracking System sensor
(senses brightness to adjust picture quality) (p. 14)
Power lamp
standby : red
on : green
Remote control
signal receiver
Switches TV/AV
Volume / Backlight / Contrast / Brightness /
Colour / Sharpness / Tint (NTSC mode) / Bass /
Treble / Balance / Tuning mode (p. 16)
()
Headphones jack (p. 22)
AV3 terminals (p. 22)
Store setting
(p. 16)
Used to store tuning and
other function settings
()
On / Off switch
AV3
S-V
V
L
R
()
Switches TV to On or Standby
(On / Off switch in On position)
Sound mute On / Off
Changes aspect ratio
(p. 10)
Normalizes (p. 14)
(Resets settings)
Selects programmes in sequence
Direct channel access
During normal TV viewing or when in the
Tuning, Programme edit or Manual tuning
menus, press and then enter channel number
using the numeric buttons
Press twice to change to the Cableband mode
Changes programme / channel
(p. 10)
Viewing a favourite teletext channel
(p. 12)
Teletext (p. 12)
MENU
Press to access the Picture, Sound and
Setup menus
Select / OK
Programme Guide (p. 10)
VCR / DVD operations (p. 11)
Volume
Programme Information (p. 10)
Teletext Index (p. 12)
Still Picture (p. 10)
Coloured buttons
(used for various functions)
(for example, see p. 12)
EXIT (Returns to TV screen)
Switches TV/AV
(To watch videos or DVDs) (p. 11)
DIRECT TV Recording
To immediately record programme
in VCR / DVD recorder with Q-Link
connection (p. 18)
Identifying Controls
Accessories / Options
()
()
()
8
Connection
External equipments and cables shown in this manual are not supplied with this TV.
Please ensure that the unit is disconnected from the mains before attaching or disconnecting any leads.
RF OUT
RF IN
AV1 AV2
DVD Recorder or VCR
SCART cable
(fully wired)
RF cable
VHF / UHF aerial
Rear terminal portion
(enlarged view)
Rear of the TV
Mains lead
Connect to AV1
or AV2 for a unit
supporting
Q-Link (p. 18).
Ŷ
Watching TV
Ŷ
To record TV
programmes
(Connect after all the other connections.)
9
Quick Start Guide
TV
VCR
123
456
789
0
OK
Exit
Adjust
Select
Return
Bass
Treble
Balance
Headphone volume
MPX
Mode
Ambience
Sound menu
Stereo
Music
Off
DOWNLOAD IN PROGRESS
PLEASE WAIT
Programme : 63
Remote control unavailable
red
Turn the TV On with the On / Off switch
1
Need help
with operations?
(example: Sound menu)
On-screen operation
guide will help you.
Auto Setup
For Belgium, Switzerland
and E.Eu, select the desired
language
Search and store TV channels automatically.
These steps are not necessary if the setup has been completed your local dealer.
Auto Setup is now
complete and your
TV is ready for viewing.
You can now use the remote
control to turn On the unit or
turn the unit to standby mode.
(Power lamp: On)
2
If Q-Link (p. 16) equipment is
connected, channel information
is automatically downloaded to
the equipment.
To edit channels
"Programme edit" (p. 16)
Auto Setup
Connection
Select your country
select
To set manually
green
(p. 16)
3
Start Auto Setup
Auto Setup will start to search
for TV channels and store them.
Manual tune
Start ATP Exit
Select country
Select language
Deutschland
Österreich
France
Italia
España
Portugal
Nederland
Danmark
Sverige
Norge
Suomi
Belgium
Schweiz
ELLADA
Polska
Česká republika
Magyarország
E.Eu
Country
OSD Language
English
AUTO SETUP IN PROGRESS
SEARCHING : PLEASE WAIT
02 99:21 41
CH12
Exit
10
OK
Ŷ
To select the two-digit programme number, e.g. 39
3
ĺ
9
TV
VCR
EXIT
GUIDE
HOLD
123
456
789
C
0
ASPECT
OK
GUIDE
VCR
123
456
789
0
Watching TV
1
Select a programme number
up
Volume
Select from the Programme table
2
select programme
Turn power on
HOLD
Freeze / unfreeze picture
Hold
Ŷ
Other Useful Functions (Operate after )
On / Off switch on unit should be On.
(for about 1 second)
watch
down
Display
status
information
Display / hide status information
Displayed information:
Programme number / Programme name / Channel number / MPX mode
(p. 14) / Sound system (p. 14) / Aspect mode
Change
aspect
ratio
or
14 : 9
A
SPECT
Each press changes the mode.
Change the aspect ratio (p. 24)
While the bar is displayed
red
green
Auto aspect / 16:9 / 14:9 / Just / 4:3 / 4:3 Full /
Zoom1 / Zoom2 / Zoom3
()
Programme Guide
Prog. Name Chan.
VCR :
1 :
2 :
3 :
4 :
5 :
6 :
7 :
8 :
9 :
10 :
11
:
12 :
CH21
CH44
CH51
CH41
CH47
CH23
CH26
CH58
-
-
-
-
-
Das Erste
ZDF
RTL
Prog. Name Chan.
13 :
14 :
15 :
16 :
17 :
18 :
19 :
20 :
21 :
22 :
23 :
24 :
-
-
-
-
-
-
-
-
-
-
-
-
select page
(in a short time)
11
Viewing
NEXT
HDMI1/2
Component
BACK
NEXT
Watching Videos and DVDs
Watching TV
Watching Videos and DVDs
Component
blue
yellow
REC
VCR DVD
TV/AV
PROGRAMME
OK
VCR
123
456
789
0
TV/AV
1
2
It is possible to connect a variety of external equipment to the TV unit. Once the equipment is connected,
use the following procedure to view the input. To connect the equipment (p. 24)
Select the connector
connected to the equipment
AV1 AV2/
S-video
AV3/
S-video
Component
VCR DVD
VCR / DVD switch
Select VCR to operate Panasonic VCR or DVD equipment
Select DVD to operate Panasonic DVD
equipment or Player theatre
Standby
Set to Standby mode / Turn on
Play
Playback VCR / DVD
Stop
Stop the operations
Rewind / Skip / Search
VCR: Rewind, review (during playback)
DVD: Skip to the previous track or title
Press and hold to search backward
(AV mode screen)
Note
Automatic Input selection - Input mode is automatically switched from TV to AV mode
when the equipment connected via SCART or HDMI terminal is operated. When the
equipment is turned off, the TV is set to TV mode.
If the external equipment has an aspect adjustment function, set to "16:9".
For details, see the manual of the equipment or ask your local dealer.
Ŷ
To return to TV
TV/AV
example: AV1
red
With the equipment turned On
Select the external input
green
red
yellow yellow
blue
red
Panasonic equipment connected to the TV can be directly operated with the
remote control.
HDMI1/
HDMI2
blue
Displays the selected
connector
Fast-forward / Skip / Search
VCR: Fast-forward, cue (during playback)
DVD: Skip to the next track or title
Press and hold to search forward
Pause
Pause / Restart
DVD: Press and hold for slow-motion play
PROGRAMME
Programme Up / Down
Select programme
REC
Record
Start recording
The remote control will be available for various Panasonic equipment with the following settings.
Switch to select VCR or DVD you want to change
VCR DVD
Press and hold
while operating
Enter the code below
(two digit code)
VCR
123
456
789
0
Press
Note
After setting, execute operation confi rmation.
The respective VCR / DVD code is turned to the default when battery has been exchanged. Set it again.
Depending on the model, operation may not be possible.
VCR
Equipment Code
VCR 10 (default)
DVD 11
DVD
Equipment Code
DVD 70 (default)
Player theatre 71
12
VCR
TEXT F.P. INDEX HOLD
123
456
789
0
MENU
OK
TEXT
VCR
123
456
789
0
Viewing Teletext
Switch to Teletext
1
Select the page
2
up
or
You can enjoy teletext broadcasting, including news, weather forecasts and subtitles, if this service is
provided by the broadcasters.
or
Ŷ
To return to TV
TEXT
(Corresponds to the colour bar)
Displays Index
(content varies
depending on the
broadcasters)
down
red
green
yellow
blue
<< 01 02 03 04 05 06 07 >>
TELETEXT
INFORMATION
17:51 28 Feb
Time / date
Current
page
number
Sub page number
Colour bar
What is FLOF mode?
In FLOF mode, four differently coloured subjects are situated at the bottom of the display. To access more
information about one of these subjects, press the appropriately coloured button. This facility enables fast access to
information on the subjects shown.
What is List mode?
In List mode, four differently coloured page numbers are situated at the bottom of the screen. Each of these
numbers can be altered and stored in the TV’s memory. ("Store Frequently viewed pages", p. 13)
Ŷ
To change mode "Teletext" in Setup menu (p. 14)
Ŷ
To adjust contrast
MENU
As the blue bar is displayed
FULL /
TOP /
BOTTOM
Reveal
hidden
data
MENU
red
Re-hide
red
Reveal hidden words e.g. quiz page answers
Ŷ
Using teletext conveniently
MENU
green
(TOP) (BOTTOM) Normal (FULL)
(Expand the BOTTOM half)
What is TOP mode?
TOP Teletext makes the task of selecting the desired Teletext pages easier and shorter. In fact page access time is
almost instantaneous, just press the button and the page appears.
13
Viewing
INDEX
View in
multi
window
Watch
TV while
waiting
for update
Store
frequently
viewed
pages
View sub
page
Call up a
favourite
pages
F.P.
Call up the page stored in "blue".
Factory setting is "103".
Viewing Teletext
MENU
Watch TV and Teletext in two windows at once
Operations can be made only in Teletext screen.
(Press twice)
Select Picture and text
On or Off
INDEX
TOP / FLOF mode only
Return to the main index page
HOLD
If you wish to hold the current page without updating
Stop or resume automatic updating
Ŷ
To resume
HOLD
HOLD
OK
Store frequently viewed pages
(only on fi rst 25 channels on Programme Guide)
in the colour bar
(List mode only)
hold
down
As page is
displayed
The number changes to white.
Corresponding
colour button
Ŷ
To change stored pages
VCR
123
456
789
0
OK
hold
down
Enter new page number
Colour button you
want to change
0 0 0
Enter the
4-digit number
example: P6
Appears at upper-left
corner of the screen
Ŷ
To view specifi c sub page
MENU
blue
Sub pages:
The number of sub pages varies depending on the broadcasters (up to 79 pages).
It may take some time for searching, during which time you can watch TV.
View sub page (Only when teletext is more than one page)
108
MENU
yellow yellow
Appears
when
updating is
completed
(You cannot change the channel.)
Teletext automatically updates itself when new information becomes available.
The news page provides a function that indicates arrival of latest news ("News Flash").
Changes to TV screen temporarily
View the
updated
page
View theTV picture while searching for a teletext page
6
Main menu
Picture menu
Sound menu
Setup menu
V iewing mode
Picture menu
Dynamic
Contrast
Brightness
Colour
Sharpness
Tint
Colour balance
P-NR
Backlight
Normal
Auto
3D-COMB
On
TV
N
EXIT
MENU
OK
V iewing mode
Contrast
Brightness
Colour
Sharpness
Tint
P-NR
Auto
Picture menu
Dynamic
Backlight
Colour balance Normal
3D-COMB
On
Colour balance Normal
Sharpness
Access
Tuning menu
MENU
OK
14
How to Use Menu Functions
Display menu
3
1
2
4
Various menus allow you to make settings for the picture, sound,
and other functions so that you can enjoy watching TV in your own way.
Displays the functions that
can be set (varies according
to the input signal)
Ŷ
To return to TV
EXIT
Ŷ
To return to the
previous screen
MENU
Select the menu
Select the item
(example: Picture menu)
select
select
Adjust or select
change
(example: Picture menu)
(example: Picture menu)
Changed
Number and positions
of alternatives
Moved
Displays the next
screen
Ŷ
Choose from among alternatives
Ŷ
Adjust using the slide bar
Ŷ
Go to the next screen
Ŷ
To reset the setting
N
Ŷ
Menu list
next
store
(Required
by some
functions)
Menu Item
Picture menu
Viewing mode
Adjust by each viewing mode
Backlight,
Contrast,
Brightness,Colour,
Sharpness
Tint
Colour balance
P-NR
3D-COMB
Sound menu
Bass
Treble
Balance
Headphone volume
MPX
Mode
Ambience
HDMI1 input
Setup menu
VIERA Link
Q-Link
AV1 out
AV2 out
Teletext
Off timer
Text language
Tuning menu
Programme edit
Auto setup
Manual tuning
Fine tuning
Colour system
Volume correction
OSD language
Colour system
Volume correction
Advanced
15
How to Use Menu Functions
(picture, sound quality, etc.)
Adjustments / Confi gurations (alternatives)
Basic picture mode (Dynamic / Normal / Cinema)
Set for each input signal
V iewing mode Dynamic
Adjusts backlight, colour, brightness, etc. for each picture mode to suit your taste
Contrast
Brightness
Colour
Sharpness
Backlight
Adjusts tint of image
For NTSC signal reception only
Tint
Chooses the colour balance of the entire image (Cool / Normal / Warm)
Colour balance
Normal
Automatically reduces unwanted picture noise (Off / Normal / Dynamic / Auto)
Not valid on HDMI, and HD signal
P-NR
Auto
Automatically makes still pictures and slow pictures look more vivid (Off / On)
For PAL or NTSC signal reception only
Not valid on RGB, S-Video, components and HDMI
Adjusts the output level of deep bass (High
Low)
Bass
Adjusts the output level of high-pitch, shrill sound (High Low)
Treble
Adjusts volume level of right and left speakers
Balance
Adjusts the volume of the headphones (High Low)
Headphone volume
Select stereo / monaural (Mono / Stereo)
Normally: Stereo
Stereo signal cannot be received: Mono
M1 / M2: Available while mono signal is transmitted
MPX Stereo
Improves sound quality for music and dramas (Music / Speech)
Mode Music
Gives a greater spatial effect by using dynamic enhancer (Off / On)
Ambience Off
Chooses according to the signal when HDMI is connected
(Auto / Digital / Analogue) (p. 25)
HDMI2 terminal is for digital signal only
HDMI1 input Auto
VIERA Link function (Off / On) (p. 19)
VIERA Link On
Chooses the connector to which a Q-Link compatible equipment is connected
(Off / AV1 / AV2) (p. 22)
Q-Link
A V2
Chooses the signal to be transmitted from the TV to Q-Link
(TV / AV2 / AV3 / Monitor)
Monitor: Image displayed on screen
Component signals cannot be outputted
AV1 out Monitor
Chooses the signal to be transmitted from the TV to Q-Link
(TV / AV1 / AV3 / Monitor)
Monitor: Image displayed on screen
Component signals cannot be outputted
AV2 out Monitor
Teletext display mode (TOP (FLOF) / List) (p. 12)
Teletext TOP
Sets the time the unit automatically turns Off. (Off / 15 / 30 / 45 / 60 / 75 / 90) (minutes)
Off timer Off
Selects teletext language (West / East1 / East2)
West: English, French, German, Greek, Italian, Spanish, Swedish, Turkish
East1: Czech, English, Estonian, Lettish, Rumanian, Russian, Ukrainian
East2: Czech, Hungarian, Lettish, Polish, Rumanian
Text language
West
Edits channels (p. 16)
Programme edit
Access
Sets channels automatically (p. 16)
Access
Auto setup
Sets channels manually (p. 16)
Manual tuning
Access
Fine tuning of channels (during rain, etc.)
Fine tuning
Selects optional colour system depending on video signals
(Auto / PAL / SECAM / M.NTSC)
Colour system
Auto
Adjusts volume of individual stations
Volume correction
Changes language for on-screen displays
OSD language
Access
Selects optional colour system based on video signals in AV mode
Colour s
y
stem Auto
Adjusts volume for AV and HDMI mode
Volume correction
In AV mode, the Sound menu and Setup menu give a smaller number of options.
3D-COMB On
Q-Link
AV1 out
Monitor
AV2
VIERA Link
AV2 out
Off timer
Tuning menu
OSD language
Setup menu
On
Monitor
Off
Text language
East2
Access
Teletext
TOP
Programme edit
Auto setup
Manual tuning
Fine tuning
Colour system
Volume correction
Tuning menu
Auto
Access
TV
EXITMENU
OK
MENU
(Press repeatedly until "Tuning mode" appears)
or (Access "Manual tuning")
(Search, Change TV system, Change programme)
or (Change programme or start searching channels)
(Store)
-
(Repeat)
Editing and Setting Channels
Select "Setup menu"
Select "Tuning menu"
3
1
2
Select the function
4
Display the menu
5
Set
For Manual tuning, using
the buttons on the unit
("Tuning mode" on p. 7)
The current channel settings can be changed according to your needs and reception conditions.
No data is stored
if an Auto setup
sequence is
interrupted.
Ŷ
To return to TV
Ŷ
To exit
EXIT
next
select
next
select
next
select
ST R F
-
/ + / TV / A V
SC1
CH12
1
Manual tuning
02 99:21 41
-
, + : Search
TV / AV : Move cursor
STR : To store
F : To exit
Programme
number (fl ash)
Channel
Channel
number
(fl ash)
Sound system
(fl ash)
Edit
channels
Ŷ
Delete
Ŷ
Add
Ŷ
Move
Ŷ
Change
channel
number
Ŷ
Change
name
Ŷ
Lock
Ŷ
Change
sound
system
Ŷ
Download to
equipment
Programme
edit
Set
automatically
Auto setup
Set
manually
Manual
tuning
Main menu
Picture menu
Sound menu
Setup menu
16
Manual tuning
02 99:21 41
CH12
1
Exit
Search down/up
Return
Direct entry
Store
C
0 9
OK
Select the programme number
and search through the channel
Store
search
Programme
number
Channel
Repeat and
Note
If a VCR is connected
with only the RF cable,
select programme
number "0".
The programme
number blinks.
To freely change settings after Auto setup
Programme edit
Prog. Chan. Name Lock Sys
1 :
2 :
3 :
4 :
5 :
CH44
CH51
CH41
CH47
CH37
Off
Off
Off
Off
Off
SC1
SC1
SC1
SC1
SC1
ABC
XYZ
FTP
123
456
Programme edit
Prog. Chan. Name Lock Sys
1 :
2 :
3 :
4 :
5 :
CH44
CH51
CH41
CH47
CH37
ABC
XYZ
FTP
123
456
Off
Off
Off
Off
Off
SC1
SC1
SC1
SC1
SC1
3 FTP
Programme edit
Prog. Chan. Name Lock Sys
1 :
2 :
3 :
4 :
5 :
CH44
CH51
CH41
CH47
CH37
ABC
XYZ
FTP
123
456
Off
Off
Off
Off
Off
SC1
SC1
SC1
SC1
SC1
ABCDEFGHIJKLMNOPQRST
UVWXYZ+
-
. 0123456789
Programme edit
Prog. Chan. Name Lock Sys
1 :
2 :
3 :
4 :
5 :
CH44
CH51
CH41
CH47
CH37
Off
Off
Off
Off
Off
SC1
SC1
SC1
SC1
SC1
XYZ
FTP
123
456
OK
Ŷ
To change the name of the broadcaster
displayed when selecting channels
Usable characters
Select the
"Name" eld
Select the
character
To next
character
Repeat
Store
Ŷ
To download channel information to a Q-Link
compatible equipment connected to the unit
blue
Automatically transmitted
(for a few sec.)
For details (p. 18)
Not available if "Q-Link" is "Off" in the Setup
menu. (p. 14)
Ŷ
To lock
select
Cursor
Select the "Lock"
eld
Select "On"
("Off" to unlock)
Select the programme number to edit
Programme
number
Name
Edit
You cannot select the channel with number
buttons or the "C" button when locked.
Ŷ
To delete
red
After confi rming, press
red
Ŷ
To add
green
After confi rming, press
green
Ŷ
To move
yellow
Select destination
yellow
Ŷ
To change channel number
Select the
"Chan." eld
Change number (can also
be changed with "C" and
number buttons)
The settings are downloaded to a Q-Link compatible equipment connected to the unit.
All previous settings are erased.
When the sequence is completed, the broadcast of programme number "1" will appear.
All current tuning
data will be erased
W ARNIN G
Exit
Return
Start ATP
OK
Start Auto setup
set
Automatically set the channels received in the area
AUTO SETUP IN PROGRESS
SEARCHING : PLEASE WAIT
02 99:21 41
CH12
Exit
Return
Settings are made automatically
Programme edit
Prog. Chan. Name Lock Sys
1 :
2 :
3 :
4 :
5 :
CH44
CH51
CH41
CH47
CH37
ABC
XYZ
FTP
123
456
Off
Off
Off
Off
Off
SC1
SC1
SC1
SC1
SC1
Ŷ
To change sound system based on signals
Select the "Sys" fi eld
Select sound system
SC1 : PAL B, G / SECAM B, G
SC2 : PAL I
SC3 : PAL D, K / SECAM D, K
F : SECAM L / L
Deutschland
Österreich
France
Italia
España
Portugal
Nederland
Danmark
Sverige
Norge
Suomi
Belgium
Schweiz
ELLADA
Polska
Česká republika
Magyarország
E.Eu
Country
OK
Select your country
select
start
Advanced
17
Editing and Setting Channels
18
External Equipment
Q-Link interlocks the TV unit and VCR / DVD recorder, enables easy recording and playback.
Ŷ
Condition
Ŷ
Features available
What you
see is
What you
record
Information
/ Message
Power
on link
and Easy
playback
Power off
link
Recording information or if recording is not possible, a message is displayed.
(Only when the programme number is "0" or "AV mode" for some equipment.)
Insert a videocassette or DVD in the recording equipment and it is operated, TV
is turned on and input mode is switched automatically so that you can view the
content. (Only when TV is in Standby mode.)
When TV is set to Standby mode, the recording equipment is also automatically
set to Standby. (Only when the videocassette or DVD is not active.)
Use the VCR / DVD recorder with the following logos:
"Q-Link", "NEXTVIEWLINK", "DATA LOGIC", "Easy Link", "Megalogic", or "SMARTLINK"
Connect the equipment to this unit’s AV1 or AV2 terminal via a "fully-wired" SCART cable. (p. 20)
Q-Link terminal setup in Setup menu (Q-Link, AV1/AV2 out). (p. 14)
Q-Link
DIRECT TV REC
DIRECT TV REC
Direct TV Recording:
Recording the current programme in VCR / DVD recorder immediately.
When Direct TV Recording is performed, the
recording equipment is automatically turned on if it
is in Standby mode.
The recording equipment is recording from its own
tuner. You can turn the TV off during recording.
Do not turn the TV off during recording AV source.
Otherwise the recording will be stopped.
• "DATA LOGIC" (a trademark of Metz Corporation) •
"Megalogic" (a trademark of Grundig Corporation)
• "Easy Link" (a trademark of Philips Corporation) • "SMARTLINK" (a trademark of Sony Corporation)
Read the manuals of the equipment too.
Some recording equipments are not applicable. Read the manuals of the equipment.
Ŷ
Download channel settings
Perform Auto setup. (p. 16)
When fi rst using this unit, see "Auto Setup". (p. 9)
Perform download to the equipment. (p. 16)
Advanced
19
External Equipment
VIERA Link
Setup menu
AV2
Q-Link
TOP
On
AV1 out
Monitor
AV2 out
Monitor
OSD language
Tuning menu
Teletext
Text language
West
Off timer
Off
MENU
OK
MENU
Select "On" (default is On)
Select "Setup menu"
Select "VIERA Link"
2
1
3
Display the menu
Enjoy additional HDMI Inter-Operability with Panasonic products which have "HDAVI Control" function.
HDMI connections to some Panasonic equipments (Panasonic DVD Recorder DIGA, Panasonic Player
theatre, Panasonic Amplifi er, etc.) allow you to enjoy the easy playback or home theatre.
About connections, see "Connections" (p. 20, 22). Read the manuals of the equipment too.
Non-HDMI-compliant cables cannot be utilized.
About applicable equipments, consult your local Panasonic dealer.
next
select
select
select
VIERA Link " Control"
4
Main menu
Picture menu
Sound menu
Setup menu
Home theatre
Preparations
(For the fi rst time / When adding new equipment, reconnecting equipment or changing setup)
After connection turn the equipment on and then switch the TV on.
Select the input mode to HDMI1 or HDMI2 (p. 11, 14), and make sure that an image is displayed
correctly.
Easy
playback
Automatic Input switching-When the connected Panasonic equipment is operated, input
mode is switched automatically. When it is stopped operating, input mode is returned.
Power on
link
When the connected Panasonic equipment is operated, TV is also automatically
turned on and the content is reproduced. (Only when TV is in Standby mode.)
Power off
link
When TV is set to Standby mode, the connected Panasonic equipment is also
automatically set to Standby.
Theatre
speaker
You can control the theatre speaker with TV’s remote control.
This function is available when Panasonic Amplifi er or Player theatre is connected.
Display the menu
Select "Home theatre" or "TV speaker"
Ŷ
Home theatre:
When selecting "Home theatre", the sound of TV speakers is mute.
When the equipment is turned off, TV speakers will be active.
Ŷ
TV speaker:
Adjustment for equipment (automatically
turned on if it is in Standby mode)
TV speakers are active.
set
select
Main menu
Picture menu
Sound menu
Setup menu
Home theatre
RGB
VIDEO
RGB
VIDEO
S-VIDEO
AV2
AV1
AV
1
AV
2
RGB
VIDEO
RGB
VIDEO
S-VIDEO
AV2
AV1
AV
1
AV
2
RGB
VIDEO
RGB
VIDEO
S-VIDEO
AV2
AV1
AV
1
AV
2
VIDEO
VIDEO
AUDIO
COMPONENT
L
R
Y
P
B
PR
AUDIO
L
R
VIDEO
VIDEO
AUDIO
COMPONENT
L
R
Y
P
B
PR
AUDIO
L
R
VIDEO
VIDEO
AUDIO
COMPONENT
L
R
Y
P
B
PR
AUDIO
L
R
AV3
S-V
V
L
R
1
Y
P
B
PR
R
L
S-V
V
L
R
AV3
S-V
V
L
R
S-V
V
L
R
20
Connections
External equipments and cables shown are not supplied with this TV.
External Equipment
Ŷ
Connect VCR / DVD recorder (Recording, Playback)
Ŷ
Connect DVD player (Playback)
Ŷ
Connect Set top box (RGB input)
Rear of the TV
Rear of the TV
Rear of the TV
Side of the TV
VCR / DVD recorder
DVD player
Set top box
or
or
or
or
or
Connect the S-VIDEO or VIDEO terminal.
Connect the S-VIDEO or VIDEO terminal.
SCART
HDMI
SCART
HDMI
SCART
For Q-Link connection (p. 18)
Side of the TV
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

Panasonic TX32LM70F Operating instructions

Category
LCD TVs
Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI