2. Select your region and click Go.
3. The update version under the model number indicated below is the current software version
(To check the firmware version of your unit, use the following procedure)
4. Read and accept the terms and conditions
5. Click ‘download’ to download the file to your PC
6. Save the file to a location on your PC i.e. Desktop
7. Locate the file on your PC and double click the icon
8. Ensure the location you are saving to is correct in the Destination Folder and click ‘Install’
9. Locate the .FRM file, right click, select SEND TO and select the drive to create the disc
10. Click on the bubble at the bottom of the screen
11. Click on ‘WRITE THESE FILES TO CD’
12. When CD Writing Wizard appears, click NEXT
13. Insert a disc
14. Wait for the files to be written to the disc
15. Click FINISH. You can now insert the update disc into the unit.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Samsung SE-406AB Specification
-
HP Spectre Series User Spectre Pro x360 G1 Convertible PC User guide
-
HP 14q-aj000 Notebook PC series User guide
-
HP 255 G4 Notebook PC User guide
-
HP 14-af100 Notebook PC series User guide
-
HP 242 G2 Notebook PC User guide
-
HP ProBook 445 G1 Notebook PC Owner's manual
-
Extron electronics TLP 350 Button Kit User manual
-
-
MF DIGITAL EC Series User manual
