Runco Home Theater Screen SP-42 User manual

OWNER’S OPERATING MANUAL

SP-42

SP-50

SP-60

Flat Panel Plasma Display Monitor

with

Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual iii

PRE

L

IMINAR

Y

THREE YEAR LIMITED WARRANTY

For Plasma Displays

Congratulations on your purchase of a Runco video product and welcome to the Runco family! We believe Runco produces

“The World’s Finest Home Theater Products.” With proper installation, setup and care, you should enjoy many years of

unparalleled video performance.

This is a LIMITED WARRANTY as defined in the Magnuson-Moss Warranty Act. Please read it carefully and retain it with your

other important documents.

SERVICE LABOR: Runco will pay for service labor by a Runco Authorized Service Center when needed as a result of a

manufacturing defect for a period of three (3) years from the effective date of delivery to the end user (excluding the plasma

glass panel).

PARTS (not including plasma glass panel): Runco will provide new or rebuilt replacement parts for the parts that fail due to

defects in materials or workmanship for a period of three (3) years from the effective date of delivery to the end user. Such

replacement parts are then subsequently warranted for the remaining portion (if any) of the original warranty period.

PLASMA GLASS PANEL: Runco will pay for service labor by a Runco Authorized Service Center when needed as a result of a

manufacturing defect for a period of one (1) year from the effective date of delivery to the end user. In addition, Runco will

provide new or rebuilt replacement parts for the parts that fail due to defects in materials or workmanship for a period of one (1)

year from the effective date of delivery to the end user. Such replacement parts are then subsequently warranted for the

remaining portion (if any) of the original warranty period.

Image burn-in on plasma display panels is specifically excluded from coverage under this Limited Warranty. Image burn-in is

the result of misuse of the product and therefore cannot be repaired under the terms of this Limited Warranty.

Normal viewing material such as television/satellite broadcasts, videotape or DVDs (not put into pause for extended periods of

time) will not cause damage to your display under normal conditions. Many DVD players are also equipped with screen savers

for this reason.

TO AVOID IMAGE RETENTION (Burn-in): Please ensure that still images are left on your plasma display panel for no more

than a few minutes. Also ensure that images displayed in the 4:3 aspect ratio mode (black or gray stripes, but no picture

information is present on the left and right edges of the screen) are used as infrequently as possible. This will prevent

permanent image burns on your plasma display panel, which can be seen permanently under certain conditions once burn-in

has occurred.

The types of images to avoid include video games, still images and computer screens with stationary tool bars and icons. (This

is why computers are equipped with screen savers – to prevent still images from burning into the monitor’s phosphors after

being displayed continuously for an extended period of time).

This Limited Warranty only covers failure due to defects in materials and workmanship that occur during normal use and does

not cover normal maintenance. This Limited Warranty does not cover cabinets or any appearance items; failure resulting from

accident, misuse, abuse, neglect, mishandling, misapplication, faulty or improper installation or setup adjustments; improper

maintenance, alteration, improper use of any input signal; damage due to lightning or power line surges, spikes and

brownouts; damage that occurs during shipping or transit; or damage that is attributed to acts of God. In the case of remote

control units, damage resulting from leaking, old, damaged or improper batteries is also excluded from coverage under this

Limited Warranty.

CAUTION: THIS LIMITED WARRANTY ONLY COVERS RUNCO PRODUCTS PURCHASED FROM RUNCO AUTHORIZED

DEALERS. ALL OTHER PRODUCTS ARE SPECIFICALLY EXCLUDED FROM COVERAGE UNDER THIS WARRANTY.

WHAT IS COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY:

WHAT IS NOT COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY:

iv Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual

PRE

L

IMINAR

Y

MOREOVER, DAMAGE RESULTING DIRECTLY OR INDIRECTLY FROM IMPROPER INSTALLATION OR SETUP IS

SPECIFICALLY EXCLUDED FROM COVERAGE UNDER THIS LIMITED WARRANTY. IT IS IMPERATIVE THAT INSTALLATION

AND SETUP WORK BE PERFORMED ONLY BY AN AUTHORIZED RUNCO DEALER TO PROTECT YOUR RIGHTS UNDER

THIS WARRANTY. THIS WILL ALSO ENSURE THAT YOU ENJOY THE FINE PERFORMANCE OF WHICH YOUR RUNCO

PRODUCT IS CAPABLE WHEN INSTALLED AND CALIBRATED BY RUNCO AUTHORIZED PERSONNEL.

Runco limits its obligations under any implied warranties under state laws to a period not to exceed the warranty period. There

are no express warranties. Runco also excludes any obligation on its part for incidental or consequential damages related to

the failure of this product to function properly. Some states do not allow limitations on how long an implied warranty lasts, and

some states do not allow the exclusion or limitation of incidental or consequential damages. So the above limitations or

exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from

state to state.

This warranty begins on the effective date of delivery to the end user. For your convenience, keep the original bill of sale as

evidence of the purchase date.

Please fill out and mail your warranty registration card. It is imperative that Runco knows how to reach you promptly if we

should discover a safety problem or product update for which you must be notified.

Repairs made under the terms of this Limited Warranty covering your Runco video product will be performed at the location of

the product, during usual working hours, providing location of product is within normal operating distance from a Runco

Authorized Service Center. In some instances it may be necessary for the product to be returned to the Runco factory for

repairs. If, solely in Runco’s judgment, location of product to be repaired is beyond normal operating distance of the closest

Runco Authorized Service Center, or the repair requires the unit be returned to the Runco factory, it is the owner’s

responsibility to arrange for shipment of the product for repair. These arrangements must be made through the selling Runco

Dealer. If this is not possible, contact Runco directly for a Return Authorization number and shipping instructions. Runco will

return product transportation prepaid in the United States, unless no product defect is discovered. In that instance, shipping

costs will be the responsibility of the owner.

other intellectual property laws. All rights are reserved. No part of this manual may be reproduced by any mechanical,

electronic or other means, in any form, without prior written permission of the manufacturer.

Reflection, Enhanced GEN3, DHD, Vivix, Virtual Cinema, CineWide, AutoScope, O-Path, CinOptx, LiveLink, CSMS, SuperOnyx

and VirtualWide are trademarks of Runco International. All other trademarks and registered trademarks used in this document

are the property of their respective owners.

Runco International products are manufactured under one or more of the following patents: US. Patent 6755540 and Other

Patents Pending.

RIGHTS, LIMITS AND EXCLUSIONS:

EFFECTIVE WARRANTY DATE:

IMPORTANT -- WARRANTY REGISTRATION:

CONTACT A RUNCO AUTHORIZED SERVICE CENTER TO OBTAIN SERVICE:

COPYRIGHT AND TRADEMARKS:

Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual v

PRE

L

IMINAR

Y

To locate the name and address of the nearest Runco Authorized Service Center, or for additional information about this

Limited Warranty, please call or write:

RUNCO INTERNATIONAL, INC.

Attn: Customer Service Department

2900 Faber Street

Union City, CA 94587

Ph: (510) 324-7777

Fax: (510) 324-9300

Toll Free: (800) 23-RUNCO

RUNCO VIDEO-PRODUCT INFORMATION

RETAIN THIS INFORMATION FOR YOUR RECORDS

_________________________________________________________ ________________________________________

Model Purchased Date

____________________________________________________________________________________________________________

Serial Number

____________________________________________________________________________________________________________

Runco Authorized Dealer Name

____________________________________________________________________________________________________________

Address

____________________________________________ __________________ ________________________

City State/Province Postal Code

____________________________________________ _________________________________________________________

Phone Fax

ADDITIONAL INFORMATION:

vi Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual

PRE

L

IMINAR

Y

Thank you for your purchase of this quality Runco product! It has been designed to provide you with the quality of video that is

expected in a home theater. This manual is your guide through the menus and operation. For the best performance, please

read it carefully and keep it handy for future reference.

CAUTION

To turn off main power, be sure to remove the plugs from power outlets. The power outlet socket should be installed as near to

the equipment as possible, and should be easily accessible.

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO DO NOT USE THIS

UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS, UNLESS THE PRONGS CAN

BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

Installation Manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area

may cause harmful interference, in which case the user will be required to correct the interference at his own expense.

Please read and follow the safety precautions listed below to ensure the equipment is free from damage, and to ensure that no

injury will occur as a result of improper use.

• Do not insert any object, especially metal or liquids, into the plasma display.

• Do not place any objects containing water or any other liquid on top of the plasma display.

• Do not place the units in direct sunlight, near heaters or in extremely dusty or humid locations.

• Do not install this system outdoors or otherwise exposed to the elements.

• Do not place heavy objects on top of the plasma display.

• If the power cord is damaged or frayed in any way, electrical shock and/or fire may result. Do not place objects on the

power cord, and keep the cord away from heat-emitting devices. Should the power cord become damaged in any way,

please contact your Runco Dealer for a replacement cord.

• Do not remove the cover of the plasma display for any reason. If any problems arise with the unit, please contact a Runco

Dealer or Runco International for service. Removing the covers will void the warranty.

Safety Precautions

WARNING

This symbol is intended to alert the user to the presence of uninsulated

“dangerous voltage” within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock.

This symbol is intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the literature

accompanying the appliance.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual vii

1Table of Contents

PRE

L

IMINAR

Y

THREE YEAR LIMITED WARRANTY ............................................................................. iii

Safety Precautions ......................................................................................................... vi

1. Introduction ...............................................................................................................1

About This Manual .......................................................................................................1

Target Audience .....................................................................................................1

If You Have Comments About This Manual... ..........................................................1

Textual and Graphic Conventions ...........................................................................1

Using This Manual ........................................................................................................2

Description, Features and Benefits ...............................................................................3

Key Features and Benefits ......................................................................................3

Parts List ...............................................................................................................4

2. Controls and Functions ............................................................................................5

CinemaWall at a Glance ...............................................................................................5

Controls and Indicators...........................................................................................5

Connectors.............................................................................................................7

CinemaWall Remote Control ......................................................................................10

3. Installation ...............................................................................................................13

Remote Control ..........................................................................................................13

Notes on Batteries ................................................................................................13

Notes on Remote Control Operation.....................................................................13

Quick Setup ...............................................................................................................15

Installation Considerations ..........................................................................................16

High-Altitude Operation ........................................................................................16

Mounting the CinemaWall on a Wall or Table Stand ..............................................16

Ambient Light .......................................................................................................17

Ventilation .............................................................................................................17

Other Considerations ............................................................................................18

Connections to the CinemaWall .................................................................................19

Video Connections................................................................................................19

Audio Connections ...............................................................................................23

RS-232 Controller Connection ..............................................................................25

Table of Contents

viii Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual

PRE

L

IMINAR

Y

4. Operation .................................................................................................................27

Turning on the Power .................................................................................................27

Changing the OSD Language .....................................................................................27

Selecting an Input Source ..........................................................................................28

Viewing Input Signal Information .................................................................................28

Setting the Computer Display Properties ....................................................................28

Changing the Aspect Ratio .........................................................................................29

Using the On-Screen Menus ......................................................................................32

Main Menu............................................................................................................34

Picture ..................................................................................................................34

Screen..................................................................................................................38

Set-Up..................................................................................................................39

Option ..................................................................................................................41

Option (Installer Adjust Mode) ...............................................................................43

Using Picture-In-Picture (PIP) .....................................................................................47

Selecting a PIP Source .........................................................................................48

Swapping the Main and PIP Windows ..................................................................48

Changing the PIP Position ....................................................................................48

Enlarging One Part of the Screen ...............................................................................49

5. Maintenance and Troubleshooting ........................................................................51

Cleaning .....................................................................................................................51

Cleaning the Display Panel Body and Remote Control ..........................................51

Cleaning the Screen..............................................................................................51

Cleaning the Vents................................................................................................51

Troubleshooting Tips ..................................................................................................51

6. Serial Communications ..........................................................................................53

RS-232 Connection and Port Configuration ...............................................................53

Serial Command Syntax .............................................................................................53

Example ...............................................................................................................53

7. Specifications ..........................................................................................................65

CinemaWall Specifications .........................................................................................65

CinemaWall Dimensions .............................................................................................67

Computer/Video Signal Compatibility .........................................................................70

Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual ix

1List of Figures

PRE

L

IMINAR

Y

2-1. CinemaWall Controls and Indicators .............................................................................5

2-2. SP-42 Connector Panel................................................................................................7

2-3. SP-50 Connector Panel................................................................................................8

2-4. SP-60 Connector Panel................................................................................................8

2-5. CinemaWall Remote Control.......................................................................................10

3-1. Available Range of the Remote Control ......................................................................13

3-2. Ventilation Requirements for Enclosure Mounting .......................................................17

3-3. RGB/Component Video (INPUT 1) Connection ...........................................................19

3-4. ANALOG RGB OUT (INPUT 1) Connection .................................................................20

3-5. DVI-D (INPUT 2) Connection.......................................................................................20

3-6. Composite or S-Video (INPUT 3) Connection .............................................................21

3-7. Component Video (INPUT 4) Connection....................................................................22

3-8. DVI-D (INPUT 5) Connection.......................................................................................22

3-9. Attaching the Small Ferrite Cores to Audio Cables......................................................23

3-10. Connecting Audio Inputs ..........................................................................................23

3-11. Audio Output Connection .........................................................................................24

3-12. Connecting Speakers ...............................................................................................24

3-13. RS-232 Control System Connection.........................................................................25

4-1. Attaching the Ferrite Cores to the Power Cable ..........................................................27

4-2. CinemaWall OSD Menu Structure...............................................................................33

4-3. Typical PLUGE Pattern for Adjusting Brightness .........................................................34

4-4. Typical Gray Bar Pattern for Adjusting Contrast ..........................................................35

4-5. Typical Color Bar Pattern for Adjusting Color Saturation and Tint................................36

4-6. Typical Test Pattern for Adjusting Sharpness..............................................................37

4-7. Audio System Functional Block Diagram ....................................................................41

4-8. Picture Orientation......................................................................................................46

4-9. Viewing an Enlarged Area of the Display .....................................................................49

7-1. CinemaWall Model SP-42 Dimensions (with Optional Table Stand) .............................67

7-2. CinemaWall Model SP-50 Dimensions (with Optional Table Stand) .............................68

7-3. CinemaWall Model SP-60 Dimensions (with Optional Table Stand) .............................69

List of Figures

x Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual

PRE

L

IMINAR

Y

Notes:

Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual 1

PRE

L

IMINAR

Y

1.1

About This Manual

This Owner’s Manual describes how to install, set up and operate the Runco CinemaWall

Flat-Panel Plasma Display Monitor (Models SP-42, SP-50 and SP-60).

Throughout this manual, all three models are referred to collectively as the “CinemaWall.”

Except where noted, the features and functions described in this manual are common to

all versions of this product.

Target AudienceRunco has prepared this manual to help home theater installers and end users get the

most out of the CinemaWall.

Runco has made every effort to ensure that this manual is accurate as of the date it was

printed. However, because of ongoing product improvements and customer feedback, it

may require updating from time to time. You can always find the latest version of this and

other Runco product manuals on-line, at www.runco.com.

If You Have Comments

About This Manual...

Runco welcomes your comments about this manual. Send them to techpub@runco.com.

Textual and Graphic

Conventions

Text Conventions: The following conventions are used in this manual, in order to clarify

the information and instructions provided:

• Remote control button identifiers are set in upper-case bold type; for example, “Press

EXIT to return to the previous menu.”

• Computer or control system input (commands you type or program into the control

system) and output (responses that appear on-screen) is shown in monospace

(fixed-width) type; for example: “To change the aspect ratio to Letterbox, send the

command 02 2A 2A 53 5A 4D 53 30 33 03.”

• All keys with functional names are initial-capped, set in bold type and enclosed in angle

brackets. These keys are the following: <Enter>, <spacebar>, <Ctrl>, <Esc>

and <Tab>.

• <Enter> indicates that you may press either the RETURN or ENTER key on your

keyboard if it has both keys.

In addition to these conventions, underlining, boldface and/or italics are occasionally used

to highlight important information, as in this example:

1. Introduction

To prevent image retention (burn-in) on your display, ALWAYS use

a screen saver and set it to the shortest possible time.

WARNING

Introduction

2 Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual

PRE

L

IMINAR

Y

Graphic Conventions: These symbols appear in numerous places throughout the

manual, to emphasize points that you must keep in mind to avoid problems with your

equipment or injury:

1.2

Using This Manual

Use the following table to locate the specific information you need in this manual.

TIPS highlight time-saving short cuts and helpful guidelines for using

certain features.

NOTES emphasize text with unusual importance or special

significance. They also provide supplemental information.

CAUTIONS alert users that a given action or omitted action can

degrade performance or cause a malfunction.

WARNINGS appear when a given action or omitted action can result

in damage to the equipment, or possible non-fatal injury to the user.

DANGER appears when a given action can cause severe injury or

death.

Tip

Note

Caution

WARNING

DANGER!

If you need... ... Turn to page:

Information about obtaining service iv

General information about the CinemaWall Flat-Panel Plasma Dis-

play Monitor

3

Installation instructions 13

First-time configuration instructions 27

Advanced configuration instructions 43

Troubleshooting tips 51

Specifications for the CinemaWall Flat-Panel Plasma Display

Monitor

65

Introduction

Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual 3

PRE

L

IMINAR

Y

1.3

Description, Features

and Benefits

The CinemaWall Flat-Panel Plasma Display Monitor combines high-resolution quality and

affordability into one package. It has all of the features that one has come to expect from a

Runco product, including high-quality video processing, aspect ratio control and ease of

use. The advanced Runco processing inside the CinemaWall combined with its high

native resolution allows the most accurate scaling for all types of signals, including DVD

(progressive or interlaced), all currently-available HDTV formats and computers.

For video originally made in film, the CinemaWall has built-in 3:2 pulldown for the sharpest

and most artifact-free images possible. Like all Runco plasmas, it can be mounted on a

wall, ceiling or placed on a tabletop and is bright enough for use in any lighting situation:

its size is such that it can be the centerpiece of many home theaters.

The CinemaWall offers a resolution of either 1365 x 768 (Models SP-50 and SP-60) or

1024 x 768 (Model SP-42). Both models include Runco’s discrete aspect ratio control

with VirtualWide™ mode to fill a 16:9 screen with standard 4:3 images without loss of

picture quality. Also included are discrete source selection, multi-language support and an

RS-232 interface for whole-house or automated control system integration.

The CinemaWall Flat-Panel Plasma Display Monitor has been carefully engineered with

ISF™ calibration standards for superb video performance. At less than five inches deep, it

can be wall-mounted or used on a tabletop stand.

Key Features and BenefitsThe CinemaWall offers these key features and benefits:

• Screen Size (diagonal): 42 inches (Model SP-42), 50 inches (Model SP-50) or 60 inches

(Model SP-60)

• 16:9 Native Resolution: 1024 x 768 (Model SP-42) or 1365 x 768 (Models SP-50 and

SP-60)

• Multiple Aspect Ratios with VirtualWide™ Mode

• Less than 5-1/4 inches deep

• Dual DVI Inputs with High-bandwidth Digital Content Protection (HDCP)

• HDTV Compatible

• Exceptional detail and artifact-free video enhancement

• Vivix™ video processing with 3:2 film detection circuitry

Introduction

4 Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual

PRE

L

IMINAR

Y

Parts List Your CinemaWall is shipped with the following items. If any items are missing or damaged,

please contact your Runco dealer or Runco Customer Service at (800) 23-RUNCO.

• CinemaWall Flat-Panel Plasma Display Monitor

• AC Power Cord

• Remote Control Unit and two (2), AA-size batteries

• Cleaning Cloth

• Cable Ties (2)

• Ferrite Cores (2) (for AC power cord)

• Small Ferrite Cores (3) (for audio cables)

• Warranty information and registration card

• Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual (this document)

Optional Accessories:

• Wall Mount Kit

• Table Stand

➤

Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual 5

PRE

L

IMINAR

Y

2.1

CinemaWall at a

Glance

Figure 2-1 shows the locations of the CinemaWall controls, indicators and connectors.

Controls and Indicators

Figure 2-1. CinemaWall Controls and Indicators

2. Controls and Functions

Main unit

Operation panel

on the underside

of the main unit

STANDBY/ON MENU

INFO

/ SET

– VOL +INPUT ASPECT RATIO

6 7 8 9 10 11

1

3

4

2

5

(SP-60)

(SP-42/SP-50)

Controls and Functions

6 Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual

PRE

L

IMINAR

Y

1. DISPLAY STAND

Optional accessory for tabletop installations.

2. REMOTE CONTROL SENSOR

Receives the signals from the remote control.

3. AMBIENT LIGHT SENSOR (SP-42 and SP-50 only)

This sensor measures the light level in the viewing area; it is active when the Energy

Mode is set to Auto (refer to Energy Mode on page 41 for more information).

4. STANDBY/ON INDICATOR

- Lights green to indicate normal operation;

- Flashes green (once per second) when the AUTO OFF feature is active.

- Lights red to indicate that the CinemaWall is in standby mode;

- Flashes green or red (twice per second) to indicate an error condition.

5. HANDLES

ALWAYS use the handles when carrying the unit.

6. STANDBY/ON BUTTON ( )

Press to put the display into operation or standby mode.

7. MENU

Press this button to show or hide the On-Screen Display (OSD) controls.

8. INFO/SET

When the OSD controls are visible on-screen, press this button to select an OSD

sub-menu or confirm a changed setting.

When no OSD appears on-screen, press this button to display the currently-selected

input, aspect ratio and input signal characteristics (resolution, timing etc.).

9. INPUT/UP ( )

Press this button to switch inputs or move the cursor up in the current OSD menu.

10. ASPECT RATIO/DOWN ( )

Press this button to change the aspect ratio (screen size) or move the cursor down in

the current OSD menu.

11. LEFT ( ) / VOL – and RIGHT ( ) / VOL +

These decrease or increase the volume of sound from the speakers, or move the

cursor left or right in the OSD mode.

Controls and Functions

Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual 7

PRE

L

IMINAR

Y

ConnectorsFigure 2-2, Figure 2-3 and Figure 2-4 show the rear-panel connector locations on the

SP-42, SP-50 and SP-60 respectively.

Figure 2-2. SP-42 Connector Panel

COMBINATION

IN OUT

RS-232C

AUDIO AUDIO

INPUT1

AUDIO

OUTPUT INPUT2

ANALOG RGB OUT

(D-Sub)

ANALOG RGB IN

(D-Sub)

INPUT1

DIGITAL RGB

(DVI-D)

INPUT2

RS-232

DVI VIDEO

COMPONENT

1 2 3 4 5 6 7 8

9 10 11

12 13

14 15 16 17

Controls and Functions

8 Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual

PRE

L

IMINAR

Y

Figure 2-3. SP-50 Connector Panel

Figure 2-4. SP-60 Connector Panel

COMBINATION

IN OUT

RS-232C

AUDIO AUDIO

INPUT1

AUDIO

OUTPUT INPUT2

ANALOG RGB OUT

(D-Sub)

ANALOG RGB IN

(D-Sub)

INPUT1

DIGITAL RGB

(DVI-D)

INPUT2

RS-232

DVI VIDEO

COMPONENT

14 15 1 2 3 4 5 6 7 8

16

17

9

10 11 12 13

COMBINATION

IN OUT

RS-232C

AUDIO AUDIO

INPUT1

AUDIO

OUTPUT INPUT2

ANALOG RGB OUT

(D-Sub)

ANALOG RGB IN

(D-Sub)

INPUT1

DIGITAL RGB

(DVI-D)

INPUT2

R

S-232

DVI VIDEO

COMPONENT

14

15

1

2

3 4 5 6 7

8

1716

9

10 11 12 13

Controls and Functions

Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual 9

PRE

L

IMINAR

Y

1. COMBINATION IN/OUT

Used to control multiple CinemaWall monitors collectively. Use a 6-pin, mini-DIN cable

(all pins wired straight-through).

2. Not used.

3. AUDIO (OUTPUT) (3.5-mm stereo mini jack)

Used to output the audio of the selected source component connected to the plasma

display to an AV amplifier or similar component. The output level is fixed.

4. AUDIO (INPUT 1) (3.5-mm stereo mini jack)

Connect this jack to the audio output connector(s) of the device connected to

INPUT

1.

5. AUDIO (INPUT 2) (3.5-mm stereo mini jack)

Connect this jack to the audio output connector(s) of the device connected to

INPUT

2.

6. ANALOG RGB OUT (INPUT 1) (15-pin D-Sub)

If desired, connect this output to the RGB input of a second display device.

7. ANALOG RGB IN (INPUT 1) (15-pin D-Sub)

For connecting components that have RGB or component output jacks such as a

personal computer or external DTV decoder (a break out cable is needed for

BNC-type connection).

8. DIGITAL RGB (INPUT 2) (DVI-D, HDCP-compliant)

VESA-standard digital video input from a personal computer, or digital video from a

DVD player or HD set-top box.

9. RS-232 (9-pin, female D-Sub)

Connect the RS-232 output from your computer or automation/control system to this

input.

10. DIGITAL RGB (INPUT 5) (DVI-D, HDCP-compliant)

This DVI input will process digital video 480p, 720p and 1080i signals (computer rates

are not recommended).

11. AUDIO (INPUT 5 / INPUT 4 / INPUT 3) (3.5-mm stereo mini jack)

Used for external audio input from video sources connected to Inputs 5, 4 and 3.

12. INPUT 4

Interlaced or progressive component input (480p to 1080i, 50 or 60 Hz; 480i not

recommended – use INPUT 3 instead).

13. INPUT 3 (S-Video or Composite Video Input)

For connecting a VCR, camcorder, laser disc player or DVD player. Use the push

button between the two connectors to select S-Video or Composite Video on Input 3

(only one can be active at a time).

14. EXTERNAL SPEAKER OUTPUT (RIGHT)

For connection of an external right speaker. Connect a speaker that has an

impedance of 6 ohms.

15. EXTERNAL SPEAKER OUTPUT (LEFT)

For connection of an external left speaker. Connect a speaker that has an impedance

of 6 ohms.

This output is not active when the CinemaWall is off or in standby

mode.

Note

Controls and Functions

10 Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual

PRE

L

IMINAR

Y

16. AC POWER INPUT

Connect the CinemaWall to power here, using the included power cord.

17. MAIN POWER SWITCH

Connects or disconnects the CinemaWall from the AC power source.

2.2

CinemaWall Remote

Control

Figure 2-5 shows the CinemaWall remote control. The paragraphs that follow describe its

functionality.

Figure 2-5. CinemaWall Remote Control

1. ASPECT RATIO

Press this button repeatedly to select a display aspect ratio.

2. INPUT SELECT

Press one of these buttons to select an input.

S / V COMP DVI VIDEO

DVI-DRGB-HD

POWER

ASPECT

RATIO

RGB

SETUP

INFO

INPUT SELECTION

PIP FUNCTION

MENU MAGNIFY

SET

MUTE VOLUME

P-OFF P-ON CLEAR

SPLIT SUB INPUT SWAP PIP SHIFT

12

345

-

+

1

10

11

12

17

2

3 14

13

4

5

6

7

15

16

8

9

19

18

Page is loading ...

Runco Home Theater Screen SP-42 User manual

This manual is also suitable for

Runco Home Theater Screen SP-42 User manual

Related papers

Other documents