Avido 2800mAh Backup Battery User manual

Thank you and congratulations on your purchase of the Avido™

2800mAh Backup Battery. To get the most of your new product,

please read these instructions before using your product. Enjoy!

Warranty:

Avido warrants this product to be free from defects in materials and

workmanship for 90-days. If your Avido accessory is found to be

defective within that time frame, we will promptly repair or replace it.

This warranty does not cover accidental damage, wear and tear, or

consequential or incidental loss. If you are in need of warranty

support, please email [email protected].

Product Specifications

Product Dimensions: 52 x 52 x 20mm

Product Weight: 68g

Performance

Input

DC 5.0V, 1A

Output

Output 5.0V, 1A

Capacity

2800mAh

Charging the Backup Battery

1. Using the Micro-USB Cable, connect the Micro-USB connector to the

Backup Battery, and the Standard USB connector to a USB Power

Source, such as a laptop computer or smartphone USB charger. The LED

will remain green while charging. A full charge takes approximately 2-3

hours.

2. When fully charged, the LED will automatically turn off.

Using the Backup Battery

1. To Power and Charge your device, connect the Standard USB connector

to the Backup Battery, and other end to your device. Your device will begin

charging and the LED will remain red throughout the charge.

Questions? Please email info@avidopower.com

Download PDF