2. Entertainment & hobby
  3. Musical instruments
  4. Guitars
  5. Guitar accessories
  6. TONO
  7. OWTNNPAS10

TONO OWTNNPAS10 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the TONO OWTNNPAS10 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Portable
PA Speaker
OWTNNPAS10
OPERATING INSTRUCTIONS
Connecing the speaker unit
i. Connect one end of the supplied AC/DC power adaptor to the AC wall socket and the other end to the
‘DC-IN’ socket on the unit. Press down the power buton to turn on the unit, press once again the buton
will pop up and turn of the unit.
Using AUX INPUT
i. Using a 2xRCA to 3.5mm audio cable (not included), simply match the coloured RCA plugs to the
sockets on the unit control panel. Then plug the 3.5mm audio plug into your music device.
Using a Wired Microphone (not included)
i. Plug your wired microphone cable into the microphone input ‘MIC’ on the unit control panel.
ii. Use the ‘M.VOL’ control to adjust the volume level of the microphone.
iii. Use the ‘ECHO’ control to adjust the microphone echo efect.
Using the Guitar Jack
i. Plug your guitar cable into the ‘GUI’ input on the unit control panel.
ii. Use the ‘Guitar Vol’ control to adjust the volume level of the guitar.
MUSIC
VOL
BASS
TREBLE
ECHO
MIC. VOL
GUITAR
VOL
OFFON
MODE
REPT
DC 15V
INPUT
POWER
AUDIO
INPUT
DISPLAY WINDOW
USB
SD CARD
MIC
GUI
MIC/PRIORITY
POWER
STOP
VOLUME +
REPEAT
MODE
AUTO SCAN FM CHANNELS
SELECT SONG # ABOVE 10
MUTE
NEXT FM CHANNEL
EQ
VOLUME -
NEXT SONG
PLAY/PAUSE
PREVIOUS
FM CHANNEL
PREVIOUS
SONG
Repeat feature only
available in USB/SD card
play mode.
REMOTE
CONTROL
RECEIVER
MIC/Priority
Pushing down this button will
prioritise all sounds from MIC
channel while muting sounds
from GUI input.
AUTO FM
STANDBY
STOP
REPE
MUTE
CH- CH+
VOL +
VOL -
EQ
1 2 3
4 5 6
7 8 9
0 10+
AUTO
INPUT
Portable
PA Speaker
OWTNNPAS10
PO Box 5658 Brendale
QLD Australia 4500
Customer Support
1800 812 261
www.crest.com.au
Proudly brought to you by:
Using the Wireless Microphone (included)
i. Insert 2 x ‘AA’ bateries (not included) into the base of the wireless microphone.
ii. Switch on the wireless microphone using the ‘ON/OFF’ switch — this microphone is designed to be
used together with this unit only.
iii. Switch on the speaker unit power.
iv. The wireless microphone will automaically work once speaker unit and microphone have been
turned on, regardless of which ‘MODE’ has been selected.
Listening to FM Radio
i. Press the ‘MODE’ buton on unit control panel or press INPUT on the remote control to select FM mode.
ii. From the unit control panel, long press ‘Play/Pause’ buton to scan for staions (this will
automaically preset the staions in your area)
Using Bluetooth
i. Press the ‘MODE’ buton on the unit control panel or remote control unil the word ‘BLUE’ shows on
the display.
ii. In your Bluetooth seings on your smartphone, tablet or notebook search for “OWTNNPAS10”
device and pair the speaker to your device. You are now able to listen to your audio iles through
your speaker.
iii. Disconnect the Bluetooth device pairing when you have inished listening to your audio iles.
Playing MP3 iles through the speaker using the SD card
or the USB sick
i. Turn of the unit and plug in your USB sick or SD Card into the appropriate port on the back side of
the unit. Please ensure that your media is properly connected and that your iles are MP3 format.
When you turn on the unit, it will automaically select the input device.
ii. Disconnect AUX INPUT while playing SD/USB iles.
REMOTE CONTROL FUNCTIONS
• Press MODE on the unit or INPUT on the remote control to change the modes (FM, Audio,
Bluetooth, USB/SD card, Line)
• To skip a track, press on the unit or remote control.
• To listen to a previous track, press on the unit or remote control.
• To pause a track, press on the unit or remote control. To restart play, press again.
• To repeat songs, press the REPE buton, it will repeat by mode of ALL/ONE/FOLD/RAN.
FOLD means songs in the same folder. RAN means songs in a random order. This only works with
USB/SD card mode.
• To use built-in Equalizer, press the ‘EQ’ buton to scroll through the opions unil you ind your
desired sound seings*. EQ applies to USB/SD Card and Bluetooth play mode.
(i.e. Bass (BAS), Jazz(JAZ), Pop(POP), Classical(CLA), Rock(ROC), Country(CUR), Normal (NOR).
Or you can manually adjust the BASS and TREBLE using the respecive controls on the rear of the unit.
• Set the volume to the desired level, via the unit’s control panel or the remote. On the unit press and
hold for down or for up or simply turn the MUSIC VOL control and on the remote press
VOL’-’ for down or VOL‘+’ for up.
• Press AUTO to automaically scan the FM Staions. Press CH-/CH+ to go to previous or next FM
channel.
• Press number butons to choose the corresponding songs in USB/SD card. Press 10+, it will jump
to 11, 21, 31,...
1678/
9
/