Abtus AVS-320 User's Operation Manual

Abtus
Brand
Abtus
Model
AVS-320
Type
User's Operation Manual
Classroom
Media Controller
Model: AVS-320
Revision 30.08.2018
PRODUCT DESCRIPTION
PRODUCT HIGHLIGHTS
The ABtUS AVS-320 is a user friendy projector controller switcher that can handle multi
format inputs from various sources and controls the projector at the same time.
It consolidates all the input and output signals in a regular classroom and functions as a
central controller to make the classroom more organized and easier for teachers to manage.
Since it only require a single CAT-5e/6/7 cable, installation is usually quick and simple. It
also has a useful DIP switch that allows users to choose from a list of pre-programmed
projectors so there’s no need for complicated programing whenever, the user changes the
projector.
● Single CAT5e/6/7 output allows for quicker and easier installations
● Support Power over Cable (POC)
● Support up to 20m with CAT-5e and up to 50m with CAT-6A
● Supports USB (HID) , VGA and HDMI
● Works well with any monitors, projectors and interactive system
● Scan convert VGA input to HDMI
● Simple to use, no training required
● “User Programmable” with Window base Application Software
User Operation Guide
TURNING ON AND BASIC OPERATION CONTROL
2
HDMI-2
Switch to HDMI 2
HDMI-3
Switch to HDMI 3
DC Input
Connect to a 12V 1A DC
Adaptor
Power OFF Button
Press to turn projector power
OFF. LED will blink and stay On
after “cool down time”
HDMI-1
Switch to HDMI 1
VGA
Switch to VGA
Main Audio Output
Connected from “Audio In” of the
Multimedia Speaker System to
2RCA pigtail cable
MIC IN
Connect to 6.3mm Mic-jack
PICTURE BLANK
Blank / Unblank projector screen
Reserved Button
No function (reserved)
Power ON Button
Press to turn projector power
ON. LED will blink and stay On
after “warm up time”
*Specifi cations are subject to changes without notice.
3
RECEIVER
RS-232-1
To control projector 1
HDMI OUT
HDMI to projector /
display
UTP/STP IN
CAT-5/6/7 connection
from AVS-320
RS-232-2
To control projector 2
User Operation Guide
INTERNAL PCB LAYOUT AND INTER CONNECTION
Confi g Port
For confi guring
programming of the
“RS-232 TX Out”
RJ45 Output Port
Connect CAT5e/6/7
cable to receiver
CAT-HD11R/A2
PC-Audio In-1
Connect to PC-Audio
USB-B
Connect to Interactive
(HID) device
USB-A
Connect to USB-A
DC Power
Connect to 12V 1A
adaptor
PC-1
Connect to VGA 1
DIP Switch
Switch for preloaded programing modes
*See AVS-320 DIP switch setting table for
more information
Audio loop back
Audio loop back from
projector
Main Audio Output
Connected from “Audio In” of the
Multimedia Speaker System to
2RCA pigtail cable
4
5
DIP Switch
Switch for preloaded programing
modes
*See table for more information
CONFIGURATION COM PORT:
1 × RS-232
(9600, 8 data bit, Non Parity and 1 stop bit)
COM PORT:
1 × RS-232 (8 Data Bit and 1 Stop Bit)
Baud Rate(9600 to 115200)
Parity Bit (Non, Even or Odd)
DELAY TIME:
Projector “ON/OFF” delay time (*in sec) 1 to 99
AVS-320 DIP switch setting table:
Dip
Switch 1
On Off Off Off 9600/n/1
On Off Off On 19200/n/1
On Off On Off 38400/e/1
On Off On On 19200/n/1
On On Off Off 38400/n/1
On On On Off 19200/n/1
On On On On 9600/n/1
On On Off On 9600/n/1
Off On/Off On/Off On/Off 115200/n/1
Dip
Switch 2
Dip
Switch 3
Dip
Switch 4
Baud
Rate
Projector Models for reference
Panasonic BR:9600 (Default)
PT-VW350, PT-VW530, PT-VW540
Panasonic BR:19200, PT-TW342A, PT-TW343RA, PT-TX312A,
PT-VW430, TW350, TW351R, Tx320
Sony : VPL-EX275, VPL-EX245, VPL-EX271, VPL-SW26C,
VPL-EW276, VPL-SX536
Hitachi : CP-X325, CP-A222, CP-AX2503
Vivitek / Promethean : D837, EST-P1, D755WT
Epson : EB-1915, EB-470, EB-475WI, EB-445WI, EB-455WI,
EB-915W, ED1925W
NEC : M300X, NP280
Casio : XJ-M150, XJ-H1600, XJ-V1
BenQ (ISP mode) : MX763
PROGRAMMING INSTRUCTIONS
User Operation Guide
6
SYSTEM DIAGRAM
3.5mm Audio In
VGA In
USB-A In
USB-B In
Single CAT-5e/6/7
RS-232
HDMI
Monitor Out
6.3mm Mic In
up to
20 meter using CAT-5e
or up to 50m using
CAT-6A
Receiver
CAT-HD11R/A2
HDMI 1 In
HDMI 2 In
HDMI 3 In
7
SPECIFICATION
Input: 1 × VGA Input (*D-Sub 15pin)
1 × PC-Audio (*3.5mm)
1 × Mic Input (*6.3mm)
1 × USB-B
1 × USB-A
3 × HDMI Input (19 pin female with build in buffer)
Output: 1 × CAT5e/6/7 output (To RX)
1 × HDMI monitor output
1 × Main Stereo Audio
VGA bandwidth: 165MHz (R+G+B), support up to 1600 x 1200
Max resolution: Full HD 1080p (HDMI)
All cable length: Up to 20 meter using CAT-5e or up to 50m using CAT-6A
Control button: Available protocol for each “Control Button” :1
(or × 2 depending on configurations)
LED: LED With LED indication and buzzer for confirmation
Volume: Main Volume Control (Analog)
Mic gain: Microphone Input Gain Control (Analog)
Power adaptor: 12V-DC, 1A
Housing: ABS
Gross dimension: 147 × 88 × 44 mm
Gross weight: 270 g
Typical Applications
Any professional presentation system requiring multiple AV Inputs of all diff erent type of Video standard and a standard
projector controller.
• Schools (Media Classroom)
• Churches
• Corporate Applications (Meeting Room)
** For details and updated Command and Program Software, please visit and download from www.abtussingapore.com
*Specifi cations are subject to changes without notice.
8
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Abtus AVS-320 User's Operation Manual

Abtus
Brand
Abtus
Model
AVS-320
Type
User's Operation Manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents