374Z
492a_V0.9
USER MANUAL
High Resolution IR Camera Series
Please read instructions thoroughly before operation and retain it for future reference.
For the actual display & operation, please refer to your product in hand.
IMPORTANT SAFEGUARD
All lead-free products offered by the company comply with the requirements
of the European law on the Restriction of Hazardous Substances (RoHS)
directive, which means our manufacture processes and products are strictly
“lead-free” and without the hazardous substances cited in the directive.
The crossed-out wheeled bin mark symbolizes that within the European
Union the product must be collected separately at the product end-of-life.
This applies to your product and any peripherals marked with this symbol. Do
not dispose of these products as unsorted municipal waste. Contact your
local dealer for procedures for recycling this equipment.
This apparatus is manufactured to comply with the radio interference
requirements.
Disclaimer
The information in this manual was current when released. We reserve the right to revise or
remove any content in this manual at any time. We do not warrant or assume any legal liability
or responsibility for the accuracy, completeness, or usefulness of this manual. For the actual
display & operation, please refer to your product in hand. The content of this manual is subject
to change without notice.
1
FEATURES
1/3" color CCD sensor with SONY Effio DSP
High resolution
Low light sensitivity of 0.1 Lux / F1.9, 0 Lux (IR ON)
Day and night features for 24-hour surveillance
Smart Light Control to dynamically adjust image performance for clear and accurate images
Special and stylish design, suitable for discreet monitoring
PACKAGE CONTENT
IR Camera Screws & Wall Plugs
User Manual
SPECIFICATIONS
M
M
O
O
D
D
E
E
L
L
H
H
i
i
g
g
h
h
R
R
e
e
s
s
o
o
l
l
u
u
t
t
i
i
o
o
n
n
I
I
R
R
C
C
a
a
m
m
e
e
r
r
a
a
Pick-up Element 1/3" HR color CCD image sensor
Number of Pixels 768(H)x494(V) <NTSC> / 752(H)x582(V) <PAL>
Resolution Super high resolution
Min. Illumination 0.1 Lux / F1.9; 0 Lux (IR ON)
Electronic Shutter 1/60 (1/50) to 1/100,000 sec.
S/N Ratio More than 48dB (AGC off)
IR LED 12 units
IR Effective Distance Up to 10 meters
Smart Light Control YES
Lens f4.57mm / F1.9
Lens Angle 60°
Video Output 1.0Vp-p composite, 75Ω
Power Source (±10%) DC12V / 500mA
Current Consumption (±10%) 60mA (IR OFF), 160mA (IR ON)
Dimensions (mm)** 130(ψ) x 37(H)
* Specifications are subject to change without notice.
** Dimensional Tolerance: ± 5mm
2
INSTALLATION
3
CONNECTION
1. DC12V Input Terminal
Connect the power terminal of the camera to a DC 12V regulated power supply.
NOTE: Please use the correct power adaptor, DC12V (regulated), to operate this unit.
The power tolerance of this unit is DC12V ± 10%. Over maximum DC 12V
power input will damage this unit.
2. Video Output Connector (VIDEO OUT)
Connect the camera video output and the monitor video input with 75Ω coaxial cable.
/
