Page is loading ...
www.auroralitebank.com
Operation manual
1
Press the runner toward the center pole.
See fig. 1
Fig. 1
A. Carry bag for Firefly Par
B. Firefly Par
C. Stand bracket
2. Setting up procedure
1. Parts
runner
center pole
stretcher
D. Outer diffuser
E. Optional deflector DFS20
A B
EC D
2
Fig. 2
Make sure all the
stretchers are
straight and equal.
If the stretchers
are twisted, rotate
the runner slightly
until they are all
straight.
See fig. 2
*You will hear clicking sound as confirmation.*You will hear clicking sound as confirmation.
3
Rotate the attached arm on the swivel bracket anticlockwise while pressing the button
attached to the ring. Locate the hole in the arm over the stud then release the button so that
the stud protrudes through the hole in the arm which will lock it securely into place.
See fig. 4, fig. 5 and fig. 6
Screw the shoe mounting
bracket to the swivel bracket
as indicated.
After attaching the speedlight
onto the shoe, mount the
assemble Firefly to a light
stand or camera bracket to use.
To position the flash head correctly
into the softbox rear aperture. move
the flash forward or backward and
then secure with the locking screw.
Fig. 4 Fig. 5Fig. 3
Fig. 6 Fig. 7Fig. 6 Fig. 7 Fig. 8
To keep pace with our continued design and development this product
may be modified by Aurora Lite Bank at any time.
123 Secheonro-3-gil, Dasa, Dalsunggun, Daegu 42921, Korea
Tel : +82-53- 384-9874 Fax : +82-53-384-9886
www.auroralitebank.com e-mail : [email protected] 2017 Aurora Lite Bank. All right reserved
C
4
Fig. 9 Fig. 10
Soft grids can be used in addition for
more directional light.
To use Firefly Par for soft light, attach
outer diffuser or deflector.
Fig. 11 Fig. 12 Fig. 13
If an optional deflector is available,
Insert a tightening bolt into a hole in the center of deflector. See fig. 11
Hold the deflector upside down and screw and an extension rod onto the bolt. See fig. 12
Screw an assembled deflector into the internal pole of Firefly Par. See fig. 13
/
