Amber Innovation CO., LTD.
A001
Bluetooth Security Tag
USER’S GUIDE
Amber Innovation CO., LTD.
FCC Information
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any
interference received; including interference that may cause undesired
operation.
Federal Communications Commission (FCC) Statement
This Equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user authority
to operate the equipment.
Tested to comply with FCC standard. FOR HOME OR OFFICE USE.
Warning :
This equipment complies with FCC RF radiation exposure limits set
forth for an uncontrolled environment. & This device and its antenna(s)
must not be co-located or conjunction with any other antenna or
transmitter
Amber Innovation CO., LTD.
A
B
Button
Buzzer
A
B
Use a sharp object such as a
small stationary knife to
open one side of the front
cover
Put in the battery
Installation of battey
Components guide
Amber Innovation CO., LTD.
Using the tag
1. Getting Started
Please search for MIMU on Apple’s App Store and install the application.
2. The first time to use the tag
Launch the MIMU application on your iOS device.
Press ”add device” button.
Press the button on the device.
The device will be discovered by the application. You can press the right
button to change its name.
The device is remembered and connected with your iOS device.
3. Stop Alarm
When your iOS device is separated from the tag for a certain distance
and the link between them is lost, both your iOS device and the tag will
start to generate alarm.
To stop the alarm on your iOS device, press the radar icon in the main
page of the application.
To stop the alarm on the tag, press the button .
4. reconnect the tag to your iOS device
Press the button on the tag.
Open the application on your iOS device, select the item with the right
name and slide the switch to the right to connect the tag.
Note: The tag will maintain connectable for 1 minute after it losses link.
During that 1 minute, you don’t have to press the button to connect. You
can just slide the switch to connect.
5. delete a device
Open the application on your iOS device.
Swipe on the item you want to delete and confirm to remove the device
from the list.
Amber Innovation CO., LTD.
Specification
Bluetooth specification
Version 4.0 compliant
Bluetooth Profile
supported
GATT/Proximity/Immediate Alert
Frequency Range
2.4GHz spectrum
Working Distance
Range
10 meters (class 2)
Weight
129g
Operating time
Up to 6 months
Standby Time
Up to 12 months
Battery
CR2032 Lithium 3V
-
1
-
2
-
3
-
4
-
5
