AIM SPORTS INC. WARRANTY
LIMITED LIFETIME WARRANTY - USA & CANADA ONLY
The Aim Sports Inc. Limited Lifetime Warranty covers against defects in materials and workmanship.
Aim Sports Inc. will replace or repair defective product(s) upon inspection by our technical staff. Defects
or damage from abnormal use, improper storage, unauthorized modifications, unauthorized repair,
misuse, neglect, abuse, alteration or improper installation will void the product(s) warranty and eligibility.
Limited Lifetime Warranty covers item(s) purchased from an authorized dealer, within the first 90 days
of ownership, with proof of receipt purchase (duplications only). Aim Sports Inc. will waive the $10.00
shipping and handling fee for returned product(s). Returned items over 90 days of ownership or no proof
of receipt purchase prior to 90 days, a $10.00 fee will apply to cover shipping and handling charges.
Make checks or money orders payable to: Aim Sports Inc.
RETURNING ITEMS
Before shipping item(s) back to Aim Sports Inc. a Return Authorization Number (RA#) must be obtained
by calling Technical Assistance. All return item(s) must be received with RA#. There will be a delay in
processing for all item(s) received without RA#.
IMPORTANT NOTICE!
DO NOT ATTEMPT TO SHIP YOUR PRODUCT BACK WITHOUT FIRST
CONTACTING OUR TECHNICAL ASSISTANCE:
AIM SPORTS INC.
TECHNICAL ASSISTANCE
Telephone: (855) ASK-4AIM
E-mail: [email protected]
WE WILL REPLACE OR REPAIR ANY DEFECTIVE ITEM THAT IS
PURCHASED OR MANUFACTURED BY AIM SPORTS INC.
180 LUMENS TACTICAL
FLASHLIGHTS
Quick Start ManualAIMSPORTSINC.COM
Downloadable PDF Version Online
CAUTION
Always check and be certain that the firearm is unloaded
before undertaking any work upon it.
FHD180B
180 Lumens Flashlight
(black)
FHD180G
180 Lumens Flashlight
(green)
180 LUMENS TACTICAL FLASHLIGHTS
INSTALLING BATTERY
1. Unscrew end cap.
2. Install two CR123A batteries, positive pole first.
3. Replace end cap.
INSTALLING PRESSURE SWITCH
1. Unscrew the bottom cap.
2. Replace with pressure switch.
MOUNTING FLASHLIGHT
1. Loosen all four screws on the offset weaver mount using the allen wrench.
2. Slide in the flashlight and tighten screws, but do Not over tighten.
2. Loosen the thumb/screw on side of mount and slide on Picatinny rail until desired
position and tighten.
FEATURES
• Made of anodized aircraft grade aluminum
• Equipped with USA made CREE LED light bulb
• Works with both pistols and rifles
• Strobe/S.O.S. mode
• Offset Weaver style mount
• Integrated belt clip
• Indludes on/off end cap and wire pressure switch
SPECIFICATIONS
L I G H T B U L B U S A C R E E L E D
MAX OUTPUT 180 LUMENS
VOLTAGE 3W
L E N G T H 5 . 5 ”
WEIGHT 8.7 oz.
BATTERY CR123A
CAUTION
Do not over tighten the screws or you may strip the
threaded holes. Stripped holes are NOT covered by warranty.
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Energizer MLT1WAAE Datasheet
-
Barska BA11403 Owner's manual
-
-
-
Barska BA11497 Owner's manual
-
Armytek Prime A1 Pro User manual
-
-
Armytek Optoelectronics Wizard Pro User manual
-
-
Armytek Optoelectronics Barracuda PRO Series User manual
