5. Your poles are now ready to suspend the inner tent (3). 8. Fasten the toggles to the sockets above each door (5)
and the velcro tabs around the poles, hook the plastic
corner tabs.
9. Tension the tent by adjusting the buckles at the pegout
points, peg and tension the guylines as required.
CONTINUE THE JOURNEY
When your partnership with this product is over
please don’t leave it hidden in a cupboard, never to
see another adventure. Wash it, pass it on, give to a
friend, sell it, donate it to charity, make it into some-
thing else or recycle it and let someone else live their
dream.
6. Locate the plastic clips on the inner canopy (4) and
connect to the poles, connect the two circular plastic
attachments clip to the downward facing hubs.
7. Throw the ysheet over the inner, using the colour-coded
tabs to match the inner and the ysheet.
SPECIFICATION
Sleeps: Jaran 2: 2, Jaran 3: 3
Outer: 30D Nylon ripstop PU/Si
Inner mesh: 20D Poly No-See-Um
Inner panels: 20D Nylon ripstop breathable side panel
Floor: 30D Nylon ripstop PU/Si
Poles: 3 poles, TH72M-6 Aluminium
Pegs: 10 pegs
Buckles: Duraex
Zips: YKK
CARE AND MAINTENANCE
◉ Clean and dry tent thoroughly after each use.
◉ Never use a washing machine or tumble dryer to clean
your tent. Car washes are also frowned upon.
◉ Spot clean with mild detergent and warm water.
◉ Air dry only.
◉ Pack tent carefully to avoid punctures.
◉ Avoid prolonged UV exposure.
◉ If pitching on stoney ground consider using a footprint
for extra durability.
FIELD REPAIRS
◉ If you are unlucky enough to rip your tent, duct tape or
StormSure Tough Tape will do the trick for eld repairs.
◉ If a pole breaks, use a splint or pole sleeve as a tempo-
rary repair.
Drop us a line when you get home and we will help
you to nd a cost eective way of getting it xed.
HACK, PATCH & SEW
In store service for your kit: alpkit.com/stores
For more ideas on how you can extend the life of your
outdoor products visit: alpkit.com/continuum
Happy camping!
Fig 5
Fig 3 Fig 4