Glacier Bay DAK-5050 Installation guide

Brand: Glacier Bay

Model: DAK-5050

Type: Installation guide

THANK YOU

We appreciate the trust and condence you have placed in Glacier Bay through the purchase of this kitchen sink. We strive to continually create

quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.

Thank you for choosing Glacier Bay!

USE AND CARE GUIDE

COPPER KITCHEN SINK

Questions, problems, missing parts? Before returning to the store,

call Glacier Bay Customer Service

8 a.m. - 6 p.m., EST, Monday - Friday

1-855-HDGLACIER

HOMEDEPOT.COM

Item #1000 578 519

#1000 578 816

Model #DAK-5050

Table of Contents

Table of Contents ...................................2

Safety Information ..................................2

Warranty ..........................................2

Pre-Installation .....................................3

Planning Installation ...............................3

Sink Dimensions ..................................3

Tools Required ....................................3

Hardware Included .................................3

Package Contents .................................4

Installation ........................................5

Care and Cleaning ..................................6

Replacement Parts ..................................6

Safety Information

Please carefully read this guide before installing or using this

product. Store this guide in a safe place for future reference.

A professional installer is recommended for this installation.

All installation types need to allow room for faucet installation.

Ensure adequate clearance behind the basin for your faucet and

backsplash, as well as the full range of motion for faucet handles and

spouts.

WARNING: Risk of personal injury. Metal surfaces are

sharp and can cause severe cuts. Use gloves and handle

sink edges carefully.

NOTICE: Specialized tools may be required to install the sink to

countertop surfaces other than wood or wood composites.

NOTICE: Use 100% Silicone (non-water based) for all installations.

NOTICE: Allow the sealant to cure following the sealant

manufacturer’s instructions.

Warranty

LIMITED LIFETIME WARRANTY

Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our limited lifetime warranty.

Glacier Bay products are warranted to the original consumer purchaser to be free of defects in materials or workmanship. We will replace

FREE OF CHARGE any product or parts that proves defective. Simply, return the product / part to any of The Home Depot retail locations

or call 1-855-HDGLACIER (1-855-434-5224) to receive the replacement item. Proof of purchase (original sales receipt) from the original

consumer purchaser must be made available for all Glacier Bay warranty claims.

This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and tear. This warranty

excludes all industrial, commercial & business usage, whose purchasers are hereby, extended a ve year limited warranty from the date of

purchase, with all other terms of this warranty applying except the duration of warranty.

Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations may

not apply to you. This warranty gives you specic legal rights and you may also have other rights that vary from state to state and province

to province. Please see a store or contact 1-855-HDGLACIER for more details.

3 HOMEDEPOT.COM

Please contact 1-855-HDGLACIER for further assistance.

Pre-Installation

PLANNING INSTALLATION

Compare all parts with the Hardware Included and Package Contents lists in this manual. Check the surface of the sink for any aws or

damage, including dents, bends, bumps, or scuff marks. If any damage is noticed or parts are missing, do not proceed with the installation.

Contact the Customer Service Team at at 1-855-HDGLACIER or visit www.HomeDepot.com.

NOTICE: Due to the uniqueness of this handmade copper sink, it is

STRONGLY recommended that this sink be installed by a professional

installer.

NOTICE: DO NOT place the basin directly on the oor. After

unpacking, place the basin on protective material such as foam

molds or cardboard from the packaging.

NOTE: This sink is an undermount (from below the

counter) installation.

SINK DIMENSIONS

32.5

14.5

18.5

8.0

16.5

Pre-Installation (continued)

TOOLS REQUIRED

Measuring

tape

Safety

goggles

Phillips

screwdriver

Pencil Hacksaw

Saber saw

or Jig saw

Electric

drill

Wrenches

Silicone

sealant

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

NOTE: This sink does come with hardware clips however the screws and additional hardware items that you may need for this installation are

not included. Since each sink is unique, the additional hardware required will depend upon the shape of the sink and the surface to which you

are installing it. For this reason, a professional installer is strongly recommended.

Part Description Quantity

AA Undermount clip 8

PACKAGE CONTENTS

Part Description Quantity

A Sink 1

B Disposal ange drain 1

C Basket strainer drain 1

*Additional basket strainer drains (SKU #441130) are available at any Home Depot store or from www.homedepot.com.

5 HOMEDEPOT.COM

Please contact 1-855-HDGLACIER for further assistance.

Installation

Preparing the countertop

NOTICE: Due to the uniqueness of this handmade copper sink, it is

STRONGLY recommended that this sink be installed by a professional

installer.

□ Place the sink (A) upside down on the countertop (1) and

trace around the edges of the sink (A). Ensure that the

placement of the sink allows enough clearance for the

faucet and other sink accessories.

□ Measure the inside edge of the lip and use this as the

distance to use between the original trace line and the

inside trace that. This inside trace line will be your cut line.

Top View

Side View

Cutting the installation hole

□ Drill a pilot hole and cut the countertop opening. Use the

appropriate cutting tool for the surface you are cutting and

cut along the inside of the template line.

Drilling holes for the clips

□ On the underside of the counter, mark the location of the

eight holes for the clips (AA) and the accessories that will

be used to attach them underneath the sink. These holes

should be equally spaced around the perimeter of the

cutout.

Installation

Installing the sink

□ Insert the screws (1) attached to the clips (AA) loosely in

the holes that you drilled for them in the underside of the

counter.

□ Place a small bead of silicone sealant (not included) around

the upper lip of the sink (A).

□ Carefully place the sink (A) into its location under the

counter, with the lip of the sink being supported by the

clips (AA).

□ Tighten the screws (1) evenly, ensuring the sink (A) remains

in place.

□ Wipe away any excess silicone and, for best results, allow

the bond to rest undisturbed for 8 hours or overnight.

Care and Cleaning

WHAT IS THE LIVING FINISH THAT COPPER HAS?

The beauty of copper is its living nish or patina. It builds overtime and works as a protective coating. The patina is a rich weathered nish

with light and dark tones complementing each other and creating the unique effect of copper. It is also what gives copper its natural anti-

microbial properties. If any substance or material is in contact for an extended period of time the Patina will be removed. However, if this

occurs the copper will naturally re-patina and darken giving the nish a natural copper blend. Examples of products that will remove the

nish leaving your sink with shiny areas: Soft Scrub, Clorox Bleach, Drano, or Acidic Foods and Products.

□ Pure Copper Sinks will age and patina with time and use. Copper is a living metal with Natural Anti-Microbial properties. Depending

on cleaning and exposure to standard household chemicals copper will change light to dark to light with typical use. Typically an

installed and frequently used copper sink will resemble the nish of an old penny.

□ For daily cleaning, simply wash with mild soap and water. We recommend wiping dry “with a soft cloth” after each use to minimize

spotting.

□ To help protect your copper sink further, we recommend applying a light application of High-Grade Carnauba wax. This can be found at

any local Home Depot.

□ DO NOT use strong abrasive cleaners, metal scrub pads, or steel wool. These will scratch the surface.

□ DO NOT leave rubber mats or sponges inside the sink. Water trapped below could lead to stains.

□ DO NOT let food, dishes or pots and pans sit inside the copper sink for prolonged periods of time.

□ DO NOT allow chlorine bleach in contact with the your new Copper sink. It will remove the patina and drastically change the nish of

your sink.

□ DO NOT allow drain cleaners to come into contact with the sink surface.

□ Rust spots – Pure Copper sinks DO NOT RUST. If you see shiny spots coming through this normal and should darken over time.

Replacement Parts

Additional basket strainer drains (SKU #441130) are available at any Home Depot store or from www.homedepot.com.

(continued)

Questions, problems, missing parts? Before returning to the store,

call Glacier Bay Customer Service

8 a.m.-6 p.m., EST, Monday-Friday

1-855-HDGLACIER

HomEDEpot.Com

Retain this manual for future use.

Glacier Bay DAK-5050 Installation guide

Glacier Bay DAK-5050 Installation guide

Glacier Bay DAK-5050 Installation guide

Related papers

Other documents