Lightolier Lytecel-EL EL4MF10LX232 User manual

Lightolier
Brand
Lightolier
Model
Lytecel-EL EL4MF10LX232
Type
User manual

This manual is also suitable for

Mounting Methods/Features Dimensions
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Volts/Ballast:
Lightolier a Genlyte company www.lightolier.com
Technical Information: (978) 657-7600 • Fax (978) 658-0595
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2007 a Genlyte company
Section 5/Folio K37-10
Lytecel
™
-EL EL4MF10LX232
Page 1 of 2 Uplight/Downlight, Pendant, 3-9/16" Deep, 10-13/16" Wide
48" or 96" Nominal Lengths, 2 Lamp T8
04/07
10 13/16 (275mm)
3 9/16
(90mm)
1
10 53/64
(275mm)
46 5/16 (1202mm)
48 9/64 (1223mm)
10 53/64
(275mm)
94 9/16 (2402mm)
Hanger location for Individual unit
95 1/4 (2419mm)
Being or end of row & hanger location
96 19/64 (2446mm)
96 19/64 (2446mm)
Hanger location in
Continuous rows
1
10 13/16" (275mm)
3 9/16"
(90mm)
10 53/64"
(275mm)
46 5/16" (1176mm)
48 9/64" (1223mm)
10 53/64"
(275mm)
96 19/64" (2446mm)
Hanger location in
Continuous rows
94 9/16" (2402mm)
Hanger location for Individual unit
95 1/4" (2441mm)
Beginning or end of row & hanger location
96 19/64" (2446mm)
End cap, two provided with Individual Fixture
(48") length), none provided with Joiner Fixture
(96" length). Catalog Number: EFL END CAP.
Canopy and Single Cable, adjustable 6" to 60".
Canopy is white. Catalog Number: EC60
Canopy, Straight Cord and Single Cable
adjustable 6" to 60". Canopy, Straight Cord is
white. Catalog Number: ECC60
Features
• Ideal for offices, stores or schools.
• Subtle low-profile ellipsoidal shape.
• Seamless welded 20 gauge steel body.
• No visible fasteners.
• 60% uplight, 40% downlight distribution.
• Low iridescence semi-specular aluminum parabolic louver.
• 2 lamp 32 watt T8 is 73.5% efficient.
• Spacing mounting ratio of 1.3.
• 48 9/64" and 96 19/64" lengths.
• Same fixture can be used individually or for row mounting.
• 3 #12 wires included for continuous mounting.
• Powder coated flat white polyester enamel finish.
• Cable mounted only.
Typical hanging detail.
0.0 45.0 90.0 FLUX
0 789 789 789
5 771 786 799 75
15 723 779 836 220
25 651 731 767 331
35 556 623 672 391
45 446 498 649 407
55 318 414 453 352
65 177 204 192 192
75 41 56 79 66
85 6 12 17 15
95 33 38 31 52
105 132 294 188 223
115 251 429 459 395
125 373 560 614 477
135 486 668 726 492
145 584 728 805 445
155 661 740 811 341
165 714 745 774 211
175 741 750 756 72
Lightolier a Genlyte company www.lightolier.com
Technical Information: (978) 657-7600 • Fax (978) 658-0595
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2007 a Genlyte company
Section 5/Folio K37-10
Job Information Type:
EL
Lytecel EL:
Ellipsoidal shape
pendant with
parabolic louver
Fixture
Length:
4 = Nominal 48"
8 = Nominal 96"
10
Number
of Cells:
10 = 1 row of 10
(48” Length)
X
2
Lamp
Quantity*
2
=
2 Lamp
32
Lamp Type/
Fixture Length:
32
=
T82
(Nominal 48")
Options:
Add appropriate
suffix to catalog
no, ie: (GLR)
Lytecel
™
-EL EL4MF10LX232
Page 2 of 2 Uplight/Downlight, Pendant, 3-9/16" Deep, 10-13/16" Wide
48" or 96" Nominal Lengths, 2 Lamp T8
Ordering Information
Explanation of Catalog Number. Example: EL4MF10LX232UNVHI
Ballast Type:
<20THD <10THD
2 Lamp Elec. T8 SO* H
II
*
1-4
Lamp Elec. T8 04* H
44
*
Lightol
ier Dimming T8 PS
*Instant Start Standard
F
Body
Finish:
F =White
Top
Reflector:
X=
None
Voltage:
120, 277 or
UNV
=
Universal
Voltage
120-277
Body Style:
M = Individual
Module
J = Joiner
Module
L
Louver Finish:
L = Low Iridescence
Semi-specular
(standard)
*For any additional ballast or wiring combination consult factory.
8˙ Units have lamps in tandem
CANDELA DISTRIBUTION
Model No. EL4MF10LX232UNVHI
LER = FP - 80.0 IW - 61.3 BF - 1.03
Comparative yearly lighting energy cost per
1000 lumens = $3.00
Report Number: G2007008
Catalog Number: EL4MF10LX232UNVHI
Lamp: (2) F32T8
Luminaire: Lytecel-EL Downlight with Semi
Specular Louver
Ballast: ICN-2P32-SC
Report is based on 2850 Lumens per lamp.
Efficiency: 73.5%
CIE Type-Direct-Indirect
Plane: 0-Deg 90-Deg
Spacing Criteria: 1.2 1.3
Shielding Angles: 90 90
Plane: 0-Deg 90-Deg
Luminous Length: 46.200 3.960
AVERAGE AVERAGE AVERAGE AVERAGE
IN DEG. 0-DEG. 45-DEG. 90-DEG.
45 5342. 5965. 7773.
55 4695. 6113. 6689.
65 3547. 4088. 3848.
75 1342. 1832. 2585.
85 583. 1166. 1652 .
LUMINANCE DATA IN CANDELA/SQ. METER
COEFFICIENTS OF UTILIZATION –
ZONAL CAVITY METHOD. EFFECTIVE
FLOOR CAVITY REFLECTANCE 0.20
0
RC 80 50 30
RW 70 50 30 50 30 10 50 30 10
01 81 77 74 59 57 55 48 46 45
02 74 68 63 52 49 46 42 40 38
03 67 60 54 46 42 39 37 35 32
04 62 53 47 41 37 33 33 30 28
05 57 47 41 36 32 29 30 27 24
06 52 42 36 33 28 25 27 24 21
07 48 38 32 30 25 22 25 21 19
08 45 35 28 27 23 19 22 19 17
09 41 31 25 25 20 17 21 17 15
10 39 29 23 23 19 16 19 16 13
ZONE LUMENS % LAMP % FIXT
00-030 626 11.0 13.2
00-040 1017 17.8 21.4
00-060 1776 31.2 37.3
00-090 2049 35.9 43.1
90-180 2708 47.5 0056.9
00-180 4757 83.5 100.0
ZONAL LUMEN SUMMARY
Options/accessories
Single Cable and Canopy. Catalog Number: EC60.
Single Cable, Straight Cord and Canopy. Catalog Number: ECC60.
Electrical Wiring Options: Consult factory.
Fusing: Internal fast-blow fusing. Suffix: GLR.
Internal slow-blow fusing. Suffix: GMF.
Specifications
Performance: In an installation of 2 lamp 28W Iuminaires with a room cavity
ratio of 1, with reflectance 80% ceiling, 50% wall, 20% floor, the C.U. shall be not
less than .77. Candelas at 65° shall not exceed 204 (10 cell). To control veiling
reflections, Iuminaire output in the 30°- 90° zone shall be not less than 29.9%.
Materials: Chassis parts are die-formed 20 gauge cold rolled steel, End caps
are 18 guage cold rolled steel with a ribbed accent.
Louver: Pre-anodized aluminum (Coilzak
®
or equal).
Finish: Louver–low iridescence semi-specular anodized aluminum (standard).
Specifications (continued)
Chassis: Flat white polyester powder coat (standard).
Rust preventive undercoating.
Electrical: Thermally protected class “P” ballast, non PCB. If K.O. is within 3"
of ballast, use wire suitable for at least 90°.
Labels: I.B.E.W./UL and ULc Listed.
  • Page 1 1
  • Page 2 2

Lightolier Lytecel-EL EL4MF10LX232 User manual

Lightolier
Brand
Lightolier
Model
Lytecel-EL EL4MF10LX232
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents