iogear PKG-M0049 User manual
- Category
- Interface hubs
- Type
- User manual
This manual is also suitable for
!
2.
1.
1. PS/2 mouse and keyboard ports
The cables from the Ps/2 mouse and PS/2 keyboard plug in here.
These ports are universal .
2. USB Type A connector
This connector plugs into the computer’s USB port, or into a powered USB hub.
Read this guide thoroughly and follow the installation and operation procedures carefully to
prevent any damage to the unit and/or any of devices it connects to:
This package contains:
• 1 USB PS/2 Adapter
• 1 User Manual
• 1 Warranty / Registration Card
© 2005 IOGEAR®. All Rights Reserved.
All brand names and trademarks are the registered property of their respective owners.
PKG-M0049
GUC10KM USER MANUAL
USB PS/2 Adapter
5. Specifications
1. Welcome
Thank you for purchasing IOGEAR's USB PS/2 Adapter. IOGEAR brings cutting
edge technology of USB to your Macintosh and PC. You will enjoy the
convenience and newfound speed that has made this technology an industry
standard.
Note:
Your order has been carefully packaged and inspected, and we hope you are
pleased with the IOGEAR product you purchased. Please inspect the contents of
the package to ensure that you have received all items and that nothing has been
damaged. If you discover a problem, please contact your dealer immediately for
assistance.
Contact Information:
(P) 866-946-4327 (F) 949-453-8785
23 Hubble Drive, Irvine, CA 92618 USA
www.iogear.com
support@iogear.com
2. Hardware Requirements and Features
PC
• Windows 98SE, 2000, ME, XP
• 300Mhz CPU
• Available USB port
Mac
• Mac OS 8.6 or greater
• 300Mhz CPU
• Available USB port
• Product Features
1) Supports Mac and PC compatible computers with USB interface
2) Easy Installation - No software required
3) Supports Windows® 98SE, 2000, ME,XP, Mac OS 8.6 or greater
4) Compatible with USB supported KVM (keyboard, video, mouse) switches
5) Two PS/2 devices (keyboard and mouse) to USB interface conversion
6) Supports PS/2 mice and Microsoft Intellimouse®
7) USB 1.0 and 1.1 specification compliant
8) Can be used to connect a USB based computer (such as a G$) to a PS/2
MiniView™ KVM switch
3. Introduction
4. Hardware Installation
• Installing the IOGEAR USB PS/2 adapter
**Make sure your computer is powered up and that you are at the Windows
Desktop.
1. Plug the PS/2 mouse and PS/2 keyboard into the appropriate sockets on the
USB PS/2 adapter. The ports are universal and either one will work for each
device.
2. Plug the USB PS/2 adapter's Type A connector into the computer's USB port,
or into a powered USB hub that is connected to the computer
3. Reboot if necessary.
• Radio & TV Interference
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation
IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY EXCEED THE PRICE PAID FOR
THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK. OR IT'S
DOCUMENTATION.
The direct vendor makes no warranty or representation, expressed, implied, or statutory with
respect to the contents or use of this documentation, and especially disclaims its quality,
performance, merchantability, or fitness for any particular purpose.
The direct vendor also reserves the right to revise or update the device or documentation
without obligation to notify any individual or entity of such revisions, or update. For further
inquiries, please contact your direct vendor.
Function Specifications
Type A plug
1 keyboard, 1 mouse
Cable length 42 cm
Power mode Bus powered via USB cable
Transfer rate
5 - 40° C (41-104° F)
Casing material
-20 - 60° C (-4-140° F)
Operating temperature
Storage temperature
Humidity
0 – 80% RH
Connectors
USB
PS/2
Plastic
12 Mbps
Please take all proper Electro Static Discharge (ESD)
precautions during the installation of your new hardware.
C
M
Y
CM
MY
CY
CMY
K
GUC10KM QSG.pdf 2/23/2005 4:04:47 PMGUC10KM QSG.pdf 2/23/2005 4:04:47 PM
-
1
iogear PKG-M0049 User manual
- Category
- Interface hubs
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
iogear GFR202SD Quick start guide
-
-
-
-
Apple GCS1772 User manual
-
-
-
-
-
