MT-96 8FT Folding Table
Unfolding Instruction for Use
1. Open table by pushing Thumb-Latch in near handle and lay on level
ground.
2. Turn the inside fixed legs out.
3. Fix the locking bar(which is used to fix the two table legs and make the
long table keep steady when moving).
4. Do remember to fix the locking bar to tighten up the legs and ensure safety
during use.
5. Turn over the table and shift the 2 elliptical fasteners onto the Y-shape
support frame. This holds the legs in place to ensure safety during use.
Folding Instruction for Storage
1. Place the table panel upside down on level ground.
2. Shift the 2 elliptical fasteners, loosen the nut, and disconnect the lock bar.
3. Fold the legs.
4. Close the 2 table panels into a case shape, making sure to leave the
handle outside the case.
Cecilware Corporation
43-05 20
th
Avenue
Long Island City, NY 11105
Tel: 800-935-2211
Fax: 718-932-7860
www.cecilwarephotos.com