2. Cres Cor
  3. CSH-121-10

Cres Cor CSH-121-10, CSH-121-10 Series Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Cres Cor CSH-121-10 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
5925 Heisley Road • Mentor, OH 44060-1833
Carving
Station
FL-2205
Rev. 4 (7/06)
Page 1 of 2
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
OPERATING and MAINTENANCE INSTRUCTIONS
Model: CSH-121-10 Series, 120 and 240 Volt
HOW TO OPERATE UNIT:
Plug cord into proper wall outlet.
Push thermostat switch “ON” and turn thermostat
to no. 10.
Preheat for 30 minutes; then add cutting board
and/or pans to the heated base.
Push lamp switch to “ON” for additional heat.
NOTE: Proper food holding temperature is 140°F
(60°C) or higher.
For uncovered pans or product:
Leave thermostat on no. 10 setting.
For covered pans or product:
Turn the thermostat to no. 6 setting.
5. Push switches and turn thermostat “OFF” when
done.
1.
2.
3.
4.
CLEANING INSTRUCTIONS:
Remove power cord from wall outlet.
DO NOT immerse unit in water.
DO NOT get water on controls.
DO NOT use abrasives or harsh
chemicals.
Wipe cooled exterior with a damp cloth.
1.
2.
3.
4.
5.
0848-063
THERMOSTAT KNOB
0595-002
THERMOSTAT BEZEL
OFF
6
3
4
5
2
1
8
7
10
9
SWITCH
OFF/ON SWITCH
THERMOSTAT
IFW HOOD OFF/ON
ELECTRICAL SPECIFICATIONS:
Model No. Volts Watts Amps Hertz Phase NEMA Service
CSH-121-10 120 550 4.6 60 1 5-15 15 AMP
CSH-121-10 240 575 2.4 60 1 6-15 15 AMP
REPLACEMENT PARTS: (Also see wiring diagrams)
Lamp, Red (250 Watts) ................................0820-001
Lamp, White (250 Watts) .............................0820-033
Lamp, Red (275 Watts/240 Volts) ................0820-014
Cutting Board ...............................................1004-019
Socket ...........................................................0822-037
5925 Heisley Road • Mentor, OH 44060-1833
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
Carving
Station
FL-2205
Rev. 4 (7/06)
Page 2 of 2
OPERATING and MAINTENANCE INSTRUCTIONS
Model: CSH-121-10 Series, 120 and 240 Volt
WIRING DIAGRAM
120v UNITS
WIRING DIAGRAM
240v UNITS
SWITCH 0808-123
SWITCH 0808-123
HOOD ASSY
0833-011PB
0833-011PN
HEATER 0811-235
2 X 150W
275W
240V
THERMOSTAT
0848-062
CORD, 240V
0810-039
8
SWITCH 0808-114
SWITCH 0808-114
8
7
7
HOOD ASSY. 0833-011-PB
0833-011-PN
HEATER 0811-235
2 X 150W
250W
2
THERMOSTAT
0848-062
5
4
3
W
CORD, 15A, 120V
0810-029
120V
B
3
1
1
1
4
4
2
3
3
7
9
8
6
5
2
240V
B
W
6
/