Consew CSM1001 User manual

Hello! I am an AI chatbot trained to assist you with the Consew CSM1001 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

®

Since 1898

Specifications subject to change without notice.

©2017 Consew USA -0417

CON-SERV

Servo Motor

Model CSM1001

CSM1001 MOTOR MANUAL

ADJUST SPEED SETTING

1. PRESS THE R BUTTON, YOU WILL SEE UO

2. PRESS THE M BUTTON. IT WILL SHOW YOU THE SPEED THE MOTOR IS CURRENTLY ON

3. CONTINUE TO PRESS THE M BUTTON UNTIL YOU REACH THE DESIRED SPEED

EXAMPLE: 5= 500, 12= 1200

4. PRESS THE R BUTTON TO SAVE THE SPEED THAT YOU HAVE CHOSEN

SET NEEDLE POSITION

1. PRESS THE R BUTTON UNTIL YOU SEE U1

2. THEN PRESS THE M BUTTON, IT SHOULD SHOW YOU #0

3. PRESS THE M BUTTON TO CHANGE TO #1, PRESS THE R BUTTON TO SAVE

0= NEEDLE POSITION DOWN

1= NEEDLE POSITION UP, PRESS R TO SAVE

CHANGE DIRECTIONS

1. PRESS R BUTTON UNTIL IT SHOWS U2

2. PRESS THE M BUTTON UNTIL YOU SEE #0

CONTINUE TO PRESS THE M BUTTON UNTIL YOU SEE #1

#0= CLOCKWISE

#1= REVERSED

3. PRESS R TO SAVE

LOCATION PARAMETER SETTING “NEEDLE POSITIONING SPEED”

1. PRESS THE R BUTTON UNTIL YOU SEE U3

2. PRESS THE M BUTTON UNTIL YOU SEE THE NUMBER DISPLAYED

3. PRESS THE M BUTTON UNTIL YOU REACH THE DESIRED NUMBER

THE LOWER THE NUMBER, THE SLOWER THE SPEED

THE HIGHER THE NUMBER, THE FASTER THE SPEED

4. PRESS R TO SAVE

SLOW START SETTING

1. PRESS THE R BUTTON UNTIL YOU SEE U4

2. PRESS THE M BUTTON, IT WILL DISPLAY #0

3. CONTINUE TO PRESS THE M BUTTON TO THE DESIRED NUMBER

4. PRESS R TO SAVE

0=9 9 IS THE SLOWEST START

/

Other documents