Bosch SGS55E76EU/90 User manual

Brand: Bosch

Model: SGS55E76EU/90

Category: Dishwashers

Type: User manual

This manual is also suitable for

Bosch SGS55E76EU/90 dishwasher offers remarkable cleaning performance with its advanced features. The auto 3in1 function automatically adjusts the program based on the detected detergent type, ensuring optimal results with combination products. Its spacious interior accommodates up to 13 place settings, making it ideal for families or those who frequently host guests. Additionally, the innovative Glass Protection Technology safeguards delicate glassware, preventing damage during the wash cycle.

9000 303 952 8709

   



Index

Safety instructions 4 . . . . . . . . . . . . .

Getting to know your appliance 5 . .

Water softener 6 . . . . . . . . . . . . . . . .

Filling the salt dispenser 7 . . . . . . . .

Adding rinse aid 7 . . . . . . . . . . . . . . .

Utensils 8 . . . . . . . . . . . . . . . . . . . . . .

Detergent 11 . . . . . . . . . . . . . . . . . . . .

auto 3in1 12 . . . . . . . . . . . . . . . . . . . . .

Overview of programmes 14 . . . . . . .

Washing dishes 15 . . . . . . . . . . . . . . .

Additional functions 17 . . . . . . . . . . . .

Maintenance and care 17 . . . . . . . . . .

Fault finding 20 . . . . . . . . . . . . . . . . . .

Customer Service 22 . . . . . . . . . . . . .

Information 23 . . . . . . . . . . . . . . . . . . .

Installation 23 . . . . . . . . . . . . . . . . . . . .

Waste disposal 25 . . . . . . . . . . . . . . . .

Safety instructions

Delivery

Immediately check the packaging and

dishwasher for any damage which may

have been caused in transit. Do not use

a damaged appliance, but consult your

supplier.

Please dispose of packaging material

properly.

Installation

Install and connect the appliance

according to the installation and

assembly instructions.

The dishwasher must NOT be

connected to the power supply during

installation.

Ensure that the protective conductor

system of the domestic electricity

supply has been installed correctly.

Electrical connection conditions must

correspond with the specifications on

the rating plate of the dishwasher.

If the dishwasher is to be installed

in a high-sided unit, ensure that the unit

is attached properly and also at the

rear.

Built-under and built-in appliances

should always be installed under a

continuous work surface which is

attached to the adjacent cupboards, in

order to ensure that the appliance is

entirely stable.

After the appliance has been installed,

the mains plug should still be easily

accessible.

Not on all models:

The plastic housing on the water input

contains an electrically operated valve.

The connecting wires are inside the

inlet hose. Do not cut through this hose

and do not immerse the plastic housing

in water.

Warning

For safety reasons, if the appliance is not

fitted in a recess, thereby making a side

wall accessible, the door hinge area

should be covered at the side.

(Risk of injury)

Covers are available as optional

accessories from customer services or

specialist stores.

In daily use

Warning

Knives and other sharp-pointed utensils

must be placed with the points down

in the cutlery basket or horizontally in

the utensils basket.

Use the dishwasher only in the

household and only for its designed

purpose, i.e. for washing domestic

dishes.

Do not lean or sit on the open door.

The appliance could tip.

Please note that free-standing

appliances may tip over if the baskets

are overloaded.

The water in the appliance is not

drinking water.

Do not add any solvents to the washing

chamber. Danger of explosion!

Open the door carefully when

the programme is still running. There

is a risk of hot water spraying out of

the appliance.

To prevent injuries, e.g. caused

by stumbling, open the dishwasher

only briefly in order to load and unload

the dishwasher.

Read and observe the safety

nformation and instructions for use on

the packaging for cleaning and rinsing

agents.

Children in the household

If fitted, use the childproof lock. An

exact description can be found in the

back of the envelope.

Do not allow children to play with

or operate the appliance.

Keep children away from detergents

and rinse aid. These may cause

chemical burns in the mouth, throat and

eyes or asphyxiation.

Keep children away from an open

dishwasher. There could still be

detergent residue inside.

If the appliance is installed at eye-level,

ensure when opening and closing the

door that children are not caught

or crushed between the appliance door

and the cupboard door situated below.

Damage

The appliance may be repaired and

opened up by a technician only. First

disconnect the appliance from the

power supply. Pull out the mains plug

(do not tug the power cord!) or switch

off the fuse. Turn off the tap.

Disposal

Make redundant appliances unusable

to prevent subsequent accidents.

Dispose of the appliance in an

environmentally friendly manner.

Warning

Children could get locked in the appliance

(risk of suffocation) or get stuck in other

positions.

Therefore: Remove the mains plug, cut the

mains wire and set aside. Damage the

door lock so that the door can no longer

be closed.

Getting to know your

appliance

Diagrams of the control panel and the

interior of the appliance can be found

in the envelope at the front.

Individual positions are referred to in

the text.

Control panel

Main switch

Door Opener

Programme selector (retractable*)

Additional options*

5 “Check water supply” display

Salt refill indicator

Rinse-aid refill indicator

8 Digital display

* some models

Appliance interior

Upper basket with additional cup

rack

Additional cutlery basket for the

top basket*

Top spray arm

Bottom spray arm

Dispenser for salt

Filters

Cutlery basket

Bottom basket

Lock for detergent dispenser

Dispenser for rinse aid

Detergent dispenser

Rating plate

* some models

You will need to purchase the

following before using the

dishwasher for the first time:

– special salt for use in dishwashers

– detergent

– rinse-aid

Only use products, which are suitable for

dishwashers.

Water softener

In order to rinse dishes and glasses

satisfactorily, the dishwasher requires soft

water, i.e. containing little or no lime,

otherwise water stains will be left behind

on crockery and glasses, etc.

If the tap water exceeds a certain level of

hardness, it must be softened, i.e.

decalcified, so that it can be used in the

dishwasher.

This is achieved by adding a special salt

to the water softener inside the

dishwasher.

The water softener, that is the required

amount of salt, is set up according to how

hard the tap water is.

Setting up the water softener

Determine the level of hardness of your

tap water. Your local water company or

service agent can help you with this.

Identify setting from the following water

hardness table.

Water hardness table

Close the door

Rotate the programme selector

from the 12 o’clock position by one

notch to the left.

Switch on main switch

and hold

down for at least 3 sec.

The digital display

indicates the

current set hardness value and the salt

refill indicator

flashes

(hardness value has been set to 4

at the factory).

To change the setting: Rotate the

programme selector

You can select a set value between

0 and 7 according to the hardness

of your water.

Switch off the main switch

The chosen setting has now been

stored.

Approx. 4 litres of water are required for

regenerating the water softening system.

The overall water consumption per load

can therefore be increased by between 0

and a maximum of 4 litres according to the

water hardness setting.

Filling the salt dispenser

Salt must always be filled before the

appliance is switched on, so that excess

salt solution is immediately flushed away

to prevent corrosion.

Open the screw-type cap of the

compartment

24 .

Before using the appliance for the first

time, pour about 1 litre of water in the

salt container.

Then refill with salt (not cooking salt)

until the salt container is full

(max. 1.5 kg). When you refill the salt,

water is being displaced and drains off.

The LOW SALT indicator

on the front

panel will light up initially but will extinguish

again after a short period when the salt

solution has become sufficiently

concentrated.

If the set hardness value is

, do not add

salt because no salt is used during

operation; the salt refill indicator

is switched off.

Warning

Do not pour detergent into the container

for special salt. This would destroy the

water softener.

Salt refill indicator

As soon as the salt refill indicator

is lit

on the control panel, refill with salt

immediately before the next rinse cycle.

Depending on the washing frequency and

the hardness setting, the regeneration salt

may not have to be topped up for several

months.

Adding rinse aid

The rinse aid is required for stain-free

utensils and clear glasses.

Use only rinse aid for domestic

dishwashers.

Open the cover on the rinse-aid

dispenser

29 . To do this, press the

mark (1

) on the cover and

simultaneously lift the cover on the

control plate (2

Carefully pour in the rinse aid to just

below the edge of the filler opening.

Close the lid, ensuring that you hear it

snap closed.

To prevent excessive foam formation

during the next rinse cycle, remove any

rinse aid which has run over with a cloth.

Adjusting the amount of

rinse-aid

The amount of rinse-aid added to the

water can be varied by adjusting the

stepless control. The rinse-aid control has

been set to ”4” in the factory.

Do not alter the setting of the rinse-aid

control unless streaks (turn knob towards

”–”) or water marks (turn knob towards ”+”)

are left on the dishes.

Rinse aid controller

Rinse-aid refill indicator

As soon as the rinse-aid refill indicator

lights up on the control panel

refill with rinse aid.

If using detergent products with integrated

rinse aid, the rinse-aid refill indicator

can be switched off (see “Switching

the rinse-aid refill indicator off and on”

in the “auto 3in1” chapter).

Utensils

Not suitable

Cutlery and utensils made of wood.

Fragile decorative glasses,

hand-crafted and antique utensils.

These decorative items are not

dishwasher-proof.

Plastic parts sensitive to hot water.

Copper and tin utensils.

Utensils which are soiled with ash,

wax, lubricating grease or ink.

Absorbent materials such as sponges

and cloths.

Aluminium and silver parts have a

tendency to discolour and fade during the

wash cycle. Even some types of glass

(e.g. crystal glass objects) may turn cloudy

after many wash cycles.

Recommendation:

In future buy utensils which are identified

as dishwasher-proof.

Damage to glassware and other

dishes

Possible causes:

type of glass or manufacturing process

chemical composition of detergent

water temperature and duration of

dishwasher programme.

Suggested remedy:

Use glassware or porcelain dishes that

have been marked ’dishwasher–proof’

by the manufacturer.

Use a mild detergent that is described

as ’kind to dishes’. If necessary, seek

further information from detergent

manufacturers.

Select a programme with as low a

temperature and as short a duration as

possible.

To prevent damage, take glass and

cutlery out of the dishwasher as soon

as possible after the programme has

ended.

Loading the dishwasher

Remove large food remnants.

It is not necessary to rinse them off

under running water.

When loading the dishwasher, ensure

that

all utensils are secure and cannot

fall over.

the openings of all receptacles are

face down.

curved or indented utensils are at

an incline, allowing water to drain.

the two spray arms can rotate freely.

Very small items should not be washed in

the dishwasher as they could easily fall out

of the baskets.

Removing the dishes

To prevent water dripping from the top

basket onto the dishes in the lower basket,

we recommend that you empty the lower

basket first and then the top basket.

Cups and glasses

Upper basket

* not included with all models

Pots and pans

Lower basket

Cutlery

Cutlery should be placed in the

dishwasher always unsorted and with the

eating surface pointing downwards. The

spray jet is then better able to reach the

individual parts.

To prevent injuries, place long, pointed

accessories and knives on the étagère

(some models) or on the knife shelf

(available as an accessory).

Folding spikes *

* on applicable models

To improve stacking of pots and pans, the

spikes can be folded down.

Shelf *

* not on all models

Lean tall glasses and those with long

stems against the shelf – not against other

items to be washed.

Long items, serving cutlery, salad servers

or knives should be placed on the shelf so

that they do not obstruct the rotation of the

spray arms. The shelf can be folded back

when not required for use.

Small accessories holder*

* some models

Light-weight plastic accessories, e.g. cups,

lids, etc. can be held securely in the small

accessories holder.

Adjusting the height

of the basket *

* some models

If required, the height of the upper utensils

basket can be adjusted to provide more

space for tall utensils either in the upper

or lower basket.

Appliance height in cm

81 86

Max. ø in cm upper 20/25* 20/25*

max. ø in cm lower 30/25* 34/29*

Select one of the two following procedures

according to the design of the top basket

for your appliance model:

Top basket with upper and

lower roller pairs

Pull out the top basket.

Remove the top basket and re-attach

it to the upper or lower rollers.

Top basket with side levers

(Rackmatic)

Pull out the top basket.

To lower the basket, press in one lever

and then the other situated on the left

and right of the basket exterior, holding

the basket firmly on the sides of the

upper edge to prevent it from falling

down.

To raise the basket, hold the basket on

the sides of the upper edge and lift it

up.

Before re-inserting the basket again,

ensure that it is at the same height

on both sides. Otherwise, the appliance

door cannot be closed and the upper

spray arm will not be connected to

the water circuit.

Detergent

You can use commercially available liquid

or powder proprietary detergents for

dishwashers or TABS (do not use

handwash!).

If phosphate-free detergents are used with

hard tap water, white deposits may be

deposited more easily on utensils and

the container walls. This can be remedied

by adding more detergent.

See detergent packaging to determine

whether a detergent is suitable for silver

parts.

If you have any other questions, we

recommend that you contact the helplines

of the detergent manufacturers.

Detergent dispenser with

dosing aid

The graduated detergent dispenser helps

you pour in the correct amount.

Lower line: 15 ml

Middle line: 25 ml

Full to the brim: 40 ml

If the detergent dispenser

30 is still

closed, press the lock

28 to open the

detergent dispenser.

Adding detergent

Fill the dispenser 30 with detergent.

Dosage: see manufacturer’s

instructions on the detergent

packaging.

Note

The cleaning tabs from various

manufacturers exhibit differing dissolving

properties, so washing power may not

develop fully during short programmes and

there may be undissolved cleaning agent

residue. It is recommended to use

washing powder for these programmes.

The Intensive programme (on some

models) requires one tab only. When using

washing powder, you can apply some

of this cleaning agent to the inside of

the appliance’s door.

Reduce costs!

If your dishes are only moderately dirty,

you may be able to use less detergent

than recommended.

Close the lid on the detergent

compartment.

Press down the lid (1) until it clicks

shut (2).

If you are using detergent in tablet form,

read the manufacturer’s

recommendations on the packaging in

order to

determine where the tablets should be

placed inside the dishwasher (e.g. in

cutlery basket, detergent compartment,

etc.).

Make sure that the lid on the detergent

compartment is closed, even if you are

using tablets.

auto 3in1

The use of so-called combined detergent

products may make the use of rinse aid

and/or salt unnecessary.

There are currently several types of

combined detergent products available.

2in1: They contain detergent and rinse

aid or salt function.

3in1: They contain detergent, rinse aid

and salt function.

4in1: They contain a detergent,

rinse-aid, salt function and an additional

glass protection component.

In addition, other combined products with

a comparable effect are offered according

to the manufacturer.

>>> Always check the type of detergent

or combined product which you

are using!

Always follow the operating instructions

or the information on the packaging.

The rinse programme is automatically

adjusted in order to obtain the best

possible rinsing and drying result.

Observe the following important

information if using combined cleaning

products:

Regeneration salt is not required up to

a water hardness of 21_ dH (37_ fH,

26_ Clarke, 3.7 mmol/l) only. No other

settings on the appliance are required.

Salt is still required if the water

hardness is above 21_ dH (37_ fH,

26_Clarke, 3.7 mmol/l). Fill the salt

dispenser with salt

and select

setting 6 on the water softening system.

If in doubt, please contact the detergent

manufacturer, especially if:

the utensils are very wet at the end

of the programme.

limescale forms.

Note

Optimum rinsing and drying results can be

obtained by using standard detergents in

conjunction with separate application of

salt and rinse aid.

Observance of the operating instructions

or information on the packaging of the

combined detergents determines their

effectiveness.

Note

Even if the rinse aid and/or salt refill

indicator is lit, the rinse programme runs

correctly when 3in1 products are used.

If the rinse aid refill indicator

or salt

refill

indicator is defective and you

would like to switch it off, proceed as

follows:

Switching the rinse-aid refill

indicator off or on*

* some models

You can switch off the rinse-aid refill

indicator

if you use a detergent

with integrated rinse-aid.

Close the door.

Press and hold down button A .

Press main switch

until the digital

display lights up.

Release both buttons.

The digital display

indicates

(rinse-aid refill indicator) and the button

A flashes.

By pressing button A you can switch

the rinse-aid indicator off

or on .

Switch off the main switch

;

The setting is saved.

“Remember to switch on the rinse-aid refill

indicator again if you use a detergent

without an integrated rinse-aid!”

Switching the salt refill

indicator / water softening

system off and on

Close the door

Rotate the programme selector

from the 12 o’clock position by one

notch to the left.

Switch on main switch

and hold

down for at least 3 sec.

The digital display

indicates the

current set hardness value and the salt

refill indicator

flashes

(hardness value has been set to 4

at the factory).

To change the setting: Rotate the

programme selector

You can select a set value between

0 and 7 according to the hardness

of your water.

Switch off the main switch

The chosen setting has now been

stored.

Note

If you use the detergent and rinse aid

separately or switch from combined

detergents to standard cleaning products,

ensure that the rinse aid refill indicator has

been switched on and the water softening

system has been set to the correct water

hardness.

Overview of programmes

The max. possible number of programmes is illustrated in this overview.

The corresponding programmes for your appliance can be found on the fascia.

Coffee, cake, milk,

sausage, cold drinks,

salads

Soups, soufflés,

potatoes, pastries,

rice, eggs,

fried food

Delicate

Type of Dishes

e.g. porcelain,

pans,

cutlery,

glasses, etc.

Type of food

remnants e.g.

Programme-

sequence

Dry

Clean

55_

Clean

40_

Prerinse

Clean

55_

Clean

45_

Soups,

potatoes,

pastries,

rice, eggs,

fried food

Wash

programme

Very little

Amount of

food remnants

State of food

remnant

Intensive

70_

Eco

50_

Gentle

40_

Quick

45_

Prerinse

Mixed

Dry

Clean

65_

Clean

50_

Prerinse

Dry

Clean

70_

Clean

70_

Prerinse

40_

Prerinse

Rinse off if

the dishes

have been

stacked

for several

days in

the

dishwash

er prior to

washing.

Inter-

mediate

rinse

Inter-

mediate

rinse

Inter-

mediate

rinse

Inter-

mediate

rinse

LittleLarge

MixedNon-

sensitive

Lightly AdhesiveVery adhesive

Dry

Clean

70_

Inter-

mediate

rinse

Clean

65_

Prerinse

Inter-

mediate

rinse

Normal

65_

Programme selection

The most appropriate programme can be

identified by comparing the type of

crockery, cutlery, etc., as well as the

amount and condition of food remains,

with the details contained in the

programme overview.

You will find the appropriate programme

information in the introduction.

Washing dishes

Reduce costs!

If only a small number of dishes have

been loaded into the dishwasher, selecting

a programme that operates at the next

lowest temperature will usually suffice.

Programme specifications

The programme specifications can be

found in the summary of instructions.

Programme specifications refer to normal

conditions. Greater deviations may occur

due to:

varying amounts of dishes

water supply temperature

water pipe pressure

ambient temperature

mains voltage tolerances

and the tolerances specific

to the appliance (e.g. temperature,

amount of water, etc.)

The water consumption values refer

to a set water hardness value of 4.

Aqua sensor *

* some models

The Aquasensor is an optical measuring

device (light barrier) which measures

the turbidity of the rinsing water.

The Aqua sensor is used according

to the programme. When the Aqua sensor

is active, “clean” rinsing water may be

transferred into the next rinsing bath

and/or the temperature adjusted. If the

turbidity is greater, the water is drained

and is replaced with fresh water. In this

way water consumption can be reduced

by approx. 4 litres.

Switching on the appliance

Close the door.

Turn on the tap fully.

Rotate programme selector

to the

required programme.

Switch on the main switch

The expected programme duration

is indicated on the numerical

display

The programme sequence starts

automatically.

Remaining running time display

When the appliance has started, the

expected programme running time is

displayed. The programmed running time

is affected by the water temperature, the

number of dishes, as well as the degree

of soiling. If these conditions are changed,

the running time (depending on the

selected programme) can vary greatly.

As the effect is not detected until a

programme is running, the time may

be longer or shorter than expected.

End of programme

The programme has ended when a figure

appears in the numerical display

Switching the dishwasher OFF

Several minutes after the programme has

ended:

Set the main switch

to OFF.

Turn the water tap off.

(Does not apply when Aqua-Stop unit

has been fitted)

Remove dishes, etc. when they have

cooled down.

At the end of the programme please open

the door fully and not partially when

emptying the dishwasher. Any escaping

water vapour could damage sensitive

worktops.

Interrupting the programme

Switch off the main switch

The lit display goes out. The programme

is saved.

If there is a warm water connection or if

the machine has already heated up and

the appliance door was opened, leave

the door open for several minutes and

then close. Otherwise, expansion may

cause the appliance door to spring open.

Switch on the main switch again.

Terminating the programme

(Reset)

Only when the main switch is on:

Rotate programme selector to the

Reset position. The digital display

indicates

after approx. 3 sec.

The programme sequence lasts

approx. 1 min.

When the programme has run,

switch off the main switch

To restart, rotate the programme selector

to the required programme. Switch on

the main switch

. The programme

sequence starts automatically.

Changing the programme

When the appliance is switched on, the

programme can be changed

within minutes.

If the programme is changed

subsequently, programme sections

(e.g. Cleaning) which have already started

run to the end. The new remaining time

consists of the remaining time of the

previous programme section and the

remaining time of the newly selected

programme.

Intensive drying *

* on applicable models

By activating the “Intensive drying”

function, the final rinse will produce

a higher temperature in all programmes

resulting in an improved drying result

(please note that higher temperatures

might have an effect on delicate items).

Close the door.

Hold down button B and

switch on main switch

Release both buttons.

The digital display

indicates

(on) or (off) and button B flashes.

To change the setting, press

button

B .

Switch off the main switch

; the

chosen setting has now been stored.

Additional functions

* on some models additional functions

can be set with the buttons.

Soaking *

The soaking cycle runs before the main

programme and must be selected before

the programme starts. In this additional

programme cooking utensils, e.g. pans,

bowls, etc., can be soaked and prerinsed

in the bottom basket.

It is recommended to put approx. 5 g of

detergent on the door.

Reduce/save time*

The rinsing times and the drying phase

are reduced. The reduced time lowers

the rinsing and drying performance.

Saving time (VarioSpeed) *

The >>Save time<< function can reduce

the running time by approx. 20% to 50%

depending on the selected rinse

programme. The particular change in

the running time is indicated on the time

remaining display. To obtain optimum

cleaning and drying results at a reduced

running time, water and energy

consumption are increased.

Half load*

If you have only a few items to wash (e.g.

glasses, cups, plates), you can switch to

“Half load”. The “half load” additional

function saves water, energy and time. It is

recommended to put a little less detergent

in the detergent dispenser than for a full

load.

Time delay *

You can delay the start of the programme

in 1-hour steps up to 19 hours.

Switch on the appliance.

Press the timer programming button

until the digital display

jumps to

Keep pressing the timer programming

button until the required time is

displayed.

To delete the timer programming,

keep pressing the button until

is displayed.

You can change your programme

selection at any time until the

programme starts.

Maintenance and care

A regular inspection and maintenance of

your machine will help to prevent faults.

This saves time and prevents problems.

Overall condition of the

machine

Check washing chamber for grease

and limescale deposits.

If you find such deposits:

Fill the detergent dispenser with

detergent, start the appliance without

utensils in the programme which has

the highest wash temperature.

Clean the appliance with detergents/

appliance cleaners which are particularly

suitable for use with dishwashers.

Regularly wipe the door seal with a

damp cloth.

Never use a steam cleaner to clean your

dishwasher. The manufacturer is not liable

for any consequential damage.

Regularly wipe the front of the appliance

and panel with a damp cloth; water and

a little washing-up liquid will suffice.

Do not use sponges with a rough surface

or abrasive detergents, as these could

scratch the surfaces.

Attention!

Never use other chlorinated household

detergents! Health hazard!

Salt and rinse aid

Check the refill indicators

If required, top up the salt and/or rinse

aid.

Filters

The filters

25 prevent larger remnants of

food or other objects from getting inside

the pump. This residue can occasionally

clog up the filters.

The filter system consists of a filter

cylinder, a flat fine filter and, depending on

the model, a microfilter (*).

Inspect the filters for obstructions every

time the dishwasher has been used.

By unscrewing the filter cylinder, you

can remove the filter system. Remove

any food remnants and clean the filters

under running water.

Reassembly:

Insert the filter system and screw down

with the filter cylinder.

Spray arms

Lime and remnants of food in the washing

water can block the nozzles in the spray

arms

22 and 23 and the arm

mountings .

Inspect the nozzles in the spray arms

for blocked holes due to remnants of

food.

If necessary, pull the lower arm 23

upwards and lift it off.

Unscrew the upper spray arm 22 .

Clean both spray arms under running

water.

Refit the spray arms. Ensure that the

lower arm has locked into place and the

upper one is screwed tight.

Pump *

* on applicable models

Larger remnants of food that have not

been trapped by the filters and have been

left in the water can cause a blockage in

the pump. The water is no longer pumped

out of the dishwasher and it can be seen

covering the filter.

Proceed as follows:

First, always disconnect the appliance

from the power supply.

Ladle out as much water as possible.

Remove the filters 25 .

Undo the screw in the cover (Torx T 20)

and remove the cover.

Inspect the inside and remove any

obstructions that you find.

Re-insert the cover and screw down.

Re-insert the filters and screw down.

Torx T20

Fault finding

Resolving minor problems

yourself

Experience has shown that you can

resolve most problems that arise during

normal daily usage yourself, without

having to call out a service engineer. Not

only does this save costs, but it also

means that the appliance is available for

use again that much sooner. The following

list of common occurrences and their

remedies should help you identify the

causes of most problems.

Problems ...

Attention

Remember: Repairs may be carried out by

a technician only. If a component has to be

replaced, ensure that only original spare

parts are used. Improper repairs or use of

non-original spare parts may cause

considerable damage and put the user at

considerable risk.

... when the appliance

is switched on

The appliance does not start.

The mains fuse has tripped.

The appliance plug has not been

inserted.

The appliance door has not been

shut properly.

The tap has not been turned on.

The filter on the water supply hose

is blocked.

Switch off the appliance and pull

out the mains plug. Turn off the

tap. Then clean the filter which is

situated at the connection of the

supply hose. Finally, restore the

power, turn on the tap and switch

on the appliance.

... with the appliance itself

Lower spray arm rotates with

difficulty

Spray arm is blocked by small

items or food remains.

Lid in detergent compartment

cannot be closed

Detergent compartment has been

overfilled.

Mechanism is clogged with

remnants of detergent.

Indicator lamps do not extinguish

after washing has finished.

Indicator lights flash after

the programme has started.

No programme selected.

Remnants of detergent stuck inside

dispenser

Compartment was damp when it

was filled up with detergent.

Compartment must be dry before

detergent is added.

Indicator lamps do not extinguish

after washing has finished

Main switch is still set to ON.

Page is loading ...

Bosch SGS55E76EU/90 User manual

Brand: Bosch

Model: SGS55E76EU/90

Category: Dishwashers

Type: User manual

This manual is also suitable for

Download PDF

report

Bosch SGS55E76EU/90 User manual

This manual is also suitable for

Bosch SGS55E76EU/90 User manual

Related papers

Other documents