2. TC HELICON
  3. DITTO MIC LOOPER
DITTO MIC LOOPER

TC HELICON DITTO MIC LOOPER Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the TC HELICON DITTO MIC LOOPER Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
STOP / CLEAR
PRESS
PRESS AND
HOLD
STOP
CLEAR
LOOP
REC / PLAY / OVERDUB
UNDO / REDO
PRESS ONCE
PRESS AND
HOLD
PRESS AND
HOLD
RECORD PLAY OVERDUB
PRESS ONCE PRESS ONCE
UNDO REDO
LOOP
STOP
USB - Accepts mini-USB cables for
rmware updates.
To switch from the default
Record/Play/Overdub sequence to
Record/Overdub/Play, hold both
footswitches while powering on.
Repeat the process to switch back.
Loop - Press once to record.
Press again to stop recording and
begin loop playback. Repeat for
additional overdubs. Hold to
undo/redo latest overdub.
Stop - Press to stop loop.
Hold footswitch to erase loop.
Mic - Connect your microphone.
Out - Connect to a mixer or
powered speaker.
Loop level - Controls the volume of
the looped audio.
Power - Connect the included
12 V / >= 400 mA power supply.
Visit tc-helicon.com to download the full manual
Quick Start Guide
TC HELICON DIT TO MIC LOOPER
/