Dell 2230d User manual

Dell 2230d Laser Printer

User's Guide

November 2008 www.dell.com | support.dell.com

Trademarks

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell, the

DELL logo, and Dell Toner Management System are trademarks of Dell Inc.; Microsoft and Windows are registered trademarks of Microsoft Corporation.

Other trademarks and trade names may be used in this document to refer to the entities claiming the marks and names of their products. Dell Inc.

disclaims any proprietary interest in trademarks and trade names other than its own.

Contents

Safety information.............................................................................9

Learning about the printer.............................................................10

Printer configurations........................................................................................................................................................10

Understanding the printer control panel...................................................................................................................13

Attaching cables..................................................................................................................................................................14

Understanding the printer menus................................................16

Paper menu...........................................................................................................................................................................16

Default Source menu..................................................................................................................................................................... 16

Size/Type menu............................................................................................................................................................................... 16

Paper Texture menu ...................................................................................................................................................................... 18

Paper Weight menu....................................................................................................................................................................... 19

Paper Loading menu ..................................................................................................................................................................... 20

Custom Types menu...................................................................................................................................................................... 20

Universal Setup menu................................................................................................................................................................... 21

USB menu...............................................................................................................................................................................22

Parallel menu........................................................................................................................................................................23

Settings menu.......................................................................................................................................................................24

General Settings menu ................................................................................................................................................................. 24

Setup menu ...................................................................................................................................................................................... 26

Finishing menu................................................................................................................................................................................ 27

Quality menu.................................................................................................................................................................................... 29

PostScript menu.............................................................................................................................................................................. 30

PCL Emul menu ............................................................................................................................................................................... 30

Using the Finishing menu................................................................................................................................................32

Additional printer setup..................................................................33

Installing internal options................................................................................................................................................33

Accessing the system board to install internal options.................................................................................................... 33

Installing a memory card ............................................................................................................................................................. 34

Installing hardware options.............................................................................................................................................36

Installing a 250- or 550-sheet drawer...................................................................................................................................... 36

Printing the printer settings configuration sheet....................................................................................................38

Interpreting the printer control panel lights.............................39

Understanding the printer control panel light sequences...................................................................................39

Understanding the primary light sequences........................................................................................................................ 39

Contents

3

Understanding the secondary error light sequences........................................................................................................ 46

Understanding the secondary paper jam light sequences ............................................................................................. 50

Loading paper and specialty media.............................................55

Setting the paper size and paper type.........................................................................................................................55

Configuring Universal paper settings..........................................................................................................................55

Loading the standard 250-sheet tray...........................................................................................................................55

Loading the optional 250- or 550-sheet tray.............................................................................................................59

Using the manual feeder..................................................................................................................................................60

Using the standard exit bin and paper stop..............................................................................................................61

Linking and unlinking trays.............................................................................................................................................62

Linking trays...................................................................................................................................................................................... 62

Unlinking trays................................................................................................................................................................................. 62

Assigning a Custom Type <x> name....................................................................................................................................... 63

Paper and specialty media guide..................................................64

Paper guidelines..................................................................................................................................................................64

Paper capacities............................................................................................................................................................................... 64

Paper characteristics...................................................................................................................................................................... 64

Unacceptable paper ...................................................................................................................................................................... 65

Selecting paper................................................................................................................................................................................ 66

Selecting preprinted forms and letterhead........................................................................................................................... 66

Using recycled paper and other office papers ..................................................................................................................... 66

Storing paper........................................................................................................................................................................67

Supported paper sizes, types, and weights...............................................................................................................67

Paper types and weights supported by the printer ........................................................................................................... 67

Paper sizes supported by the printer ...................................................................................................................................... 68

Setting up for local printing...........................................................70

Windows

®

................................................................................................................................................................................70

Installing the Printer Drivers ....................................................................................................................................................... 70

Installing Additional Printer Drivers......................................................................................................................................... 70

Installing Additional Printer Software..................................................................................................................................... 71

Macintosh

®

.............................................................................................................................................................................72

Mac OS X: Adding the Printer in Print Center or Printer Setup Utility ......................................................................... 72

Mac OS 9: Creating a Desktop Printer With Desktop Printer Utility ............................................................................. 72

Linux

®

.......................................................................................................................................................................................73

Software Overview..........................................................................74

Status Monitor Center........................................................................................................................................................74

Local Printer Settings Utility............................................................................................................................................74

Contents

4

Driver Profiler........................................................................................................................................................................75

Dell Printer Alert Utility......................................................................................................................................................76

Installing the Optional XPS Driver.................................................................................................................................76

Dell Toner Management System...................................................................................................................................77

Printing Status Window................................................................................................................................................................ 77

Dell Printer Supplies Reorder Application ............................................................................................................................. 77

Printing...............................................................................................79

Printing a document..........................................................................................................................................................79

Printing on both sides of the paper..............................................................................................................................80

Setting Jam Recovery.........................................................................................................................................................80

Printing specialty documents.........................................................................................................................................81

Tips on using letterhead............................................................................................................................................................... 81

Tips on using transparencies ...................................................................................................................................................... 82

Tips on using envelopes............................................................................................................................................................... 82

Tips on using labels........................................................................................................................................................................ 83

Tips on using card stock ............................................................................................................................................................... 83

Printing a booklet ........................................................................................................................................................................... 84

Printing information pages..............................................................................................................................................84

Printing the menu settings page .............................................................................................................................................. 84

Printing the print quality test pages ........................................................................................................................................ 84

Canceling a print job..........................................................................................................................................................85

Maintaining the printer...................................................................87

Ordering supplies................................................................................................................................................................87

Printer attached locally to a computer ................................................................................................................................... 87

Cleaning the exterior of the printer..............................................................................................................................87

Storing supplies...................................................................................................................................................................87

Conserving supplies...........................................................................................................................................................88

Extending the life of your toner cartridge..................................................................................................................88

Replacing supplies..............................................................................................................................................................89

Replacing the toner cartridge .................................................................................................................................................... 89

Replacing the photoconductor kit ........................................................................................................................................... 91

Moving the printer..............................................................................................................................................................94

Before moving the printer........................................................................................................................................................... 94

Moving the printer to another location.................................................................................................................................. 94

Setting the printer up in a new location ................................................................................................................................ 95

Shipping the printer ...................................................................................................................................................................... 95

Contents

5

Administrative support...................................................................96

Adjusting Power Saver......................................................................................................................................................96

Restoring the factory default settings..........................................................................................................................96

Clearing jams.....................................................................................97

Avoiding jams.......................................................................................................................................................................97

Accessing jam areas............................................................................................................................................................98

Understanding jam lights and access locations.......................................................................................................98

Clearing jams behind the photoconductor kit and toner cartridge...............................................................102

Clearing jams from the standard exit bin.................................................................................................................104

Clearing jams from Tray 1..............................................................................................................................................104

Clearing jams from Tray 2..............................................................................................................................................106

Clearing jams in the manual feeder...........................................................................................................................107

Clearing jams behind the rear door...........................................................................................................................108

Troubleshooting.............................................................................110

Solving basic printer problems....................................................................................................................................110

Solving printing problems.............................................................................................................................................110

Jobs do not print...........................................................................................................................................................................110

Multiple-language PDFs do not print....................................................................................................................................111

Job takes longer than expected to print ..............................................................................................................................111

Job prints from the wrong tray or on the wrong paper .................................................................................................111

Incorrect characters print...........................................................................................................................................................111

Tray linking does not work........................................................................................................................................................112

Large jobs do not collate ...........................................................................................................................................................112

Solving option problems................................................................................................................................................112

Option does not operate correctly or quits after it is installed ....................................................................................112

Drawers.............................................................................................................................................................................................113

Memory card ..................................................................................................................................................................................113

Solving paper feed problems.......................................................................................................................................113

Paper frequently jams .................................................................................................................................................................113

Paper jam lights remain on after jam is cleared ................................................................................................................114

Page that jammed does not reprint after the jam is cleared ........................................................................................114

Solving print quality problems....................................................................................................................................114

Isolating print quality problems..............................................................................................................................................114

Blank pages.....................................................................................................................................................................................115

Characters have jagged or uneven edges ...........................................................................................................................116

Clipped images..............................................................................................................................................................................116

Gray background ..........................................................................................................................................................................116

Ghost images..................................................................................................................................................................................116

Contents

6

Incorrect margins..........................................................................................................................................................................117

Paper curl.........................................................................................................................................................................................117

Print is too dark..............................................................................................................................................................................118

Print is too light .............................................................................................................................................................................118

Skewed print...................................................................................................................................................................................119

Toner fog or background shading appears on the page ...............................................................................................119

Toner rubs off.................................................................................................................................................................................120

Toner specks...................................................................................................................................................................................120

Transparency print quality is poor..........................................................................................................................................120

Streaked horizontal lines............................................................................................................................................................121

Streaked vertical lines .................................................................................................................................................................121

Solid black or white streaks appear on transparencies or paper.................................................................................122

Appendix..........................................................................................124

Dell Technical Support Policy.......................................................................................................................................124

Contacting Dell..................................................................................................................................................................124

Warranty and Return Policy...........................................................................................................................................125

Index.................................................................................................126

Contents

7

8

Safety information

Connect the power supply cord to a properly grounded electrical outlet that is near the product and easily accessible.

CAUTION—SHOCK HAZARD: Do not set up this product or make any electrical or cabling connections, such

as the power supply cord or telephone, during a lightning storm.

Refer service or repairs, other than those described in the user documentation, to a professional service person.

This product is designed, tested, and approved to meet strict global safety standards with the use of specific

manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer is not

responsible for the use of other replacement parts.

CAUTION—SHOCK HAZARD: Make sure that all external connections (such as Ethernet and telephone system

connections) are properly installed in their marked plug-in ports.

CAUTION—POTENTIAL INJURY: This product uses a laser. Use of controls or adjustments or performance of

procedures other than those specified herein may result in hazardous radiation exposure.

This product uses a printing process that heats the print media, and the heat may cause the media to release emissions.

You must understand the section in your operating instructions that discusses the guidelines for selecting print media

to avoid the possibility of harmful emissions.

CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot

component, allow the surface to cool before touching.

CAUTION—POTENTIAL INJURY: Use the handholds on the sides of the printer to lift it, and make sure your

fingers are not under the printer when you set it down.

CAUTION—POTENTIAL INJURY: Do not twist, bind, crush, or place heavy objects on the power cord. Do not

subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture

and walls. If the power cord is misused, a risk of fire or electrical shock results. Inspect the power cord regularly

for signs of misuse. Remove the power cord from the electrical outlet before inspecting it.

CAUTION—SHOCK HAZARD: When accessing the system board, turn the printer off, and then unplug the power

cord from the wall outlet before continuing. If you have other devices attached to the printer, then turn them

off as well and unplug any cables going to the printer.

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory

devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the

wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well,

and unplug any cables going into the printer.

CAUTION—SHOCK HAZARD: To avoid the risk of electric shock when cleaning the exterior of the printer, unplug

the power cord from the wall outlet and disconnect all cables from the printer before proceeding.

CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury

or printer damage:

• Turn the printer off using the power switch, and then unplug the power cord from the wall outlet.

• Disconnect all cords and cables from the printer before moving it.

• Lift the printer off of the optional drawer and set it aside instead of trying to lift the drawer and printer at the

same time.

Note: Use the handholds located on both sides of the printer to lift it off the optional drawer.

Safety information

9

Learning about the printer

Printer configurations

Basic model

The following illustration shows the printer front with its basic features or parts:

1

Front door release button

2

Paper stop

3 Standard exit bin

4

Printer control panel

5 System board door

6

Standard 250-sheet tray (Tray 1)

7 Manual feeder door

8

Front door

The following illustration shows the printer back with its basic features or parts:

Learning about the printer

10

1 Rear door

2

USB port

3

Parallel port

4

Printer power cord socket

5

Power button (On/Off switch)

6 Locking device

Configured models

The following illustration shows the printer configured with an optional 250-sheet drawer:

Learning about the printer

11

1 Front door release button

2

Paper stop

3 Standard exit bin

4

Printer control panel

5

System board door

6

Standard 250-sheet tray (Tray 1)

7

Optional 250-sheet drawer (Tray 2)

8 Manual feeder door

9

Front door

The following illustration shows the printer configured with an optional 550-sheet drawer:

Learning about the printer

12

1 Front door release button

2

Paper stop

3 Standard exit bin

4

Printer control panel

5

System board door

6

Standard 250-sheet tray (Tray 1)

7

Optional 550-sheet drawer (Tray 2)

8 Manual feeder door

9

Front door

Understanding the printer control panel

The printer control panel features six lights and two buttons.

Learning about the printer

13

Item

1 Error light

2

Jam light

3

Load paper light

4 Toner light

5 Ready light

6

Continue button

7

Stop button

Attaching cables

1 Connect the printer to a computer using USB or parallel cable.

2 Connect the power cord to the printer first and then to a wall outlet.

Learning about the printer

14

1 USB port

2

Parallel port

3

Printer power cord socket

Learning about the printer

15

Understanding the printer menus

A number of menus are available to make it easy for you to change the printer settings. You may print a menus list

by printing the menu settings page. From a printer connected by USB or parallel cable, access the menus by using

the Local Printer Settings Utility for Microsoft

®

Windows

®

or Printer Settings for Macintosh

®

.

Paper menu

Default Source menu

Menu item Description

Default Source

Tray <x>

Manual Paper

Manual Env

Sets a default paper source for all print jobs

Notes:

• Tray 1 (standard tray) is the factory default setting.

• Only an installed paper source will appear as a menu setting.

• A paper source selected for a print job overrides the Default Source setting

for the duration of the print job.

• If the same size and type of paper are in two trays and the Paper Size and

Paper Type settings match, the trays are automatically linked. When one

tray is empty, the job prints using paper from the linked tray.

Size/Type menu

Menu item Description

Select Source menu

Tray 1

Tray 2

Manual Paper

Manual Envelope

Notes:

• These menus let you specify the installed paper size and type in the

selected tray or manual feeder.

• Only installed trays and feeders are listed in this menu.

Set Size menu for Tray 1 or Tray 2

A4

A5

A6

JIS B5

Executive

Folio

Legal

Letter

Oficio (Mexico)

Statement

Universal

Lets you specify the paper size loaded in each tray

Notes:

• Letter is the US factory default setting. A4 is the international factory

default setting.

• If the same size and type of paper are in two trays and the Paper Size and

Paper Type settings match, then the trays are automatically linked. When

one tray is empty, the job prints using paper from the linked tray.

• The A6 paper size is supported only in Tray 1.

Understanding the printer menus

16

Menu item Description

Set Size menu for Manual Paper

A4

A5

Executive

Folio

JIS B5

Legal

Letter

Oficio (Mexico)

Statement

Universal

Lets you specify the size of the paper being loaded in the manual feeder

Note: Letter is the US factory default setting. A4 is the international factory

default setting.

Set Size menu for Manual Envelope

7 3/4 Envelope

9 Envelope

10 Envelope

C5 Envelope

B5 Envelope

DL Envelope

Other Envelope

Lets you specify the size of the envelope being manually loaded

Note: 10 Envelope is the US factory default setting. DL Envelope is the

international factory default setting.

Set Type menu for Tray 1

Plain Paper

Card Stock

Transparency

Recycled

Bond

Letterhead

Preprinted

Colored Paper

Light Paper

Heavy Paper

Rough/Cotton

Custom Type <x>

Lets you specify the type of paper loaded in Tray 1

Notes:

• Plain Paper is the factory default setting for Tray 1.

• If available, a user-defined name will appear instead of Custom Type <x>.

• Use this menu item to configure automatic tray linking.

Set Type menu for Tray 2

Plain Paper

Card Stock

Recycled

Bond

Letterhead

Preprinted

Colored Paper

Light Paper

Heavy Paper

Rough/Cotton

Custom Type <x>

Lets you specify the type of paper loaded in Tray 2

Notes:

• Custom Type <x> is the factory default setting.

• If available, a user-defined name will appear instead of Custom Type <x>.

• Use this menu item to configure automatic tray linking.

Understanding the printer menus

17

Menu item Description

Set Type menu for Manual Paper

Plain Paper

Card Stock

Transparency

Bond

Letterhead

Preprinted

Colored Paper

Light Paper

Heavy Paper

Rough/Cotton

Custom Type <x>

Lets you specify the type of paper being manually loaded

Note: Plain Paper is the factory default setting.

Set Type menu for Manual

Envelope

Custom Type <x>

Lets you specify the type of envelope being manually loaded

Note: Envelope is the factory default setting.

Paper Texture menu

In the Paper Texture menu, the Select Type and Select Texture features work together to enable you to select the

texture for a specific type of paper.

Menu item Description

Select Type

Plain Texture

Card Stock Texture

Transparency Texture

Recycled Texture

Bond Texture

Envelope Texture

Letterhead Texture

Preprinted Texture

Colored Texture

Light Texture

Heavy Texture

Rough Texture

Custom <x> Texture

Specifies the paper type

Understanding the printer menus

18

Menu item Description

Select Texture

Smooth

Normal

Rough

After you select a setting for Select Type, the Select Texture feature lets you

set the texture for that type of media.

Notes:

• Normal is the factory default setting for most items.

• Rough is the factory default setting for Bond.

• When Rough Texture is the setting selected for Select Type, Rough is the

only Select Texture setting available.

• Settings appear only if the paper is supported.

Paper Weight menu

In the Paper Weight menu, the Select Type and Select Weight features work together to enable you to select the

weight for a specific type of paper.

Menu item Description

Select Type

Plain Weight

Card Stock Weight

Transparency Weight

Recycled Weight

Bond Weight

Envelope Weight

Letterhead Weight

Preprinted Weight

Colored Weight

Light Weight

Heavy Weight

Rough Weight

Custom <x> Texture

Specifies the paper type

Select Weight

Light

Normal

Heavy

After you select a setting for Select Type, the Select Weight feature

lets you set the weight for that type of media.

Notes:

• Normal is the factory default setting for most items.

• When Light Weight is the setting selected for Select Type, Light

is the only Select Weight setting available.

• When Heavy Weight is the setting selected for Select Type, Heavy

is the only Select Weight setting available.

• Settings appear only if the paper is supported.

Understanding the printer menus

19

Paper Loading menu

Menu item Description

Select Type

Recycled Loading

Bond Loading

Letterhead loading

Preprinted Loading

Colored Loading

Light Loading

Heavy Loading

Custom Loading

Specifies the paper type

Note: After you select the type of paper, the Set Loading menu

appears.

Set Loading

• Duplex

• Off

Specifies whether duplex (2-sided) printing is turned on

Note: Off is the factory default setting.

Custom Types menu

Menu item Description

Custom Type <x>

Paper

Card Stock

Transparency

Envelope

Rough/Cotton

Name a Custom Type <x>, and this user-defined name displays instead of

Custom Type <x>.

Notes:

• The Custom Name must be limited to 16 characters.

• Paper is the factory default setting for the Custom Type.

• The custom media type must be supported by the selected tray or feeder

in order for you to print from that source.

Recycled

Paper

Card Stock

Transparency

Envelope

Rough/Cotton

Assign a paper type for the Recycled paper type loaded, and it will also be the

Recycled paper type in other menus.

Notes:

• Paper is the factory default setting.

• The Recycled type must be supported by the selected tray or feeder in

order for you to print from that source.

Understanding the printer menus

20

Page is loading ...

Dell 2230d User manual

This manual is also suitable for

Dell 2230d User manual

Related papers

Other documents