Kingston Technology KHX3200AK2/1G Datasheet

Kingston Technology
Brand
Kingston Technology
Model
KHX3200AK2/1G
Category
Memory modules
Type
Datasheet

Kingston Technology KHX3200AK2/1G is a kit of two 64M x 64-bit (512MB) DDR400 SDRAM (Synchronous DRAM) CL2 memory modules, which provide high performance and reliable operation. With a total kit capacity of 1GB (1024MB), this memory module is ideal for use in high-performance computing systems, workstations, and gaming PCs.

The KHX3200AK2/1G memory module features a double-data-rate architecture, which allows for two data transfers per clock cycle. It also has a programmable read latency of 2 (clock) and a programmable burst length of 2, 4, or 8. These features make the KHX3200AK2/1G memory module ideal for use in applications that require high data throughput and low latency.

Kingston Technology KHX3200AK2/1G is a kit of two 64M x 64-bit (512MB) DDR400 SDRAM (Synchronous DRAM) CL2 memory modules, which provide high performance and reliable operation. With a total kit capacity of 1GB (1024MB), this memory module is ideal for use in high-performance computing systems, workstations, and gaming PCs.

The KHX3200AK2/1G memory module features a double-data-rate architecture, which allows for two data transfers per clock cycle. It also has a programmable read latency of 2 (clock) and a programmable burst length of 2, 4, or 8. These features make the KHX3200AK2/1G memory module ideal for use in applications that require high data throughput and low latency.

Memory Module Specification
Document No. 4803623-001.A00
07/03/03
KHX3200AK2/1G
1GB (512MB 64M x 64-Bit x 2 pcs.)
PC3200 CL2 184-Pin DIMM Kit
KEYED
Page 1
DESCRIPTION:
Kingston's KHX3200AK2/1G is a kit of two 64M x 64-bit (512MB) DDR400 SDRAM (Synchronous
DRAM) CL2 memory modules. Total kit capacity is 1GB (1024MB). The components on each module
include sixteen 32M x 8-bit (8M x 8-bit x 4 Bank / 200MHz, 5ns) DDR400 SDRAM in TSOP packages.
Each 184-pin DIMM uses gold contact fingers and requires +2.6V. The electrical and mechanical
specifications are as follows:
FEATURES:
Power supply : Vdd: 2.6V ± 0.2V, Vddq: 2.6V ± 0.2V
Double-data-rate architecture; two data transfers per clock cycle
Bidirectional data strobe(DQS)
Differential clock inputs(CK and CK)
DLL aligns DQ and DQS transition with CK transition
Programmable Read latency 2 (clock)
Programmable Burst length (2, 4, 8)
Programmable Burst type (sequential & interleave)
Timing Reference: 2-3-2-6-1 at +2.6V
Edge aligned data output, center aligned data input
Auto & Self refresh, 7.8us refresh interval(8K/64ms refresh)
Serial presence detect with EEPROM
High Performance Heat Spreader
PCB : Height 1.250” (34.75mm), double sided component
PERFORMANCE:
Clock Cycle Time (tCK) 5ns (min.) / 10ns (max.)
Row Cycle Time (tRC) 55ns (min.)
Refresh Row Cycle Time (tRFC) 65ns (min.)
Row Active Time (tRAS) 40ns (min.) / 100,000ns (max.)
Power (IDD0) 3.744 W (operating)
UL Rating 94 V - 0
Operating Temperature 0
o
C to 70
o
C
Storage Temperature -55
o
C to +150
o
C
Kingston Technology
Document No. 4803623-001.A00 Page 2
MODULE DIMENSIONS:
0.050
0.0078 ±0.006
(0.20 ±0.15)
(1.270)
0.100
(2.50 )
0.250
(6.350)
0.157
(4.00)
0.071
(1.80)
0.039 ± 0.002
(1.000 ± 0.050)
(3.80)
2.175
(6.62)
0.26
0.1496
(3.00)
0.118
(2.00)
0.0787
(4.00)
0.1575
1.200
0.700
0.393
0.000
0.000
2.886
5.250
(30.48)
(17.80)
(10.00)
(00.00)
(73.30)
(133.35)
Units : Inches (Millimeters)
1
(00.00)
All Kingston products are tested to meet our published specifications. Some motherboards or system configurations may not
operate at the published HyperX memory speeds and timing settings. Kingston does not recommend that any user attempt to
run their computers faster than the published speed. Overclocking or modifying your system timing may result in damage to
computer components.
For more information, go to www.kingston.com
1.250"
(34.75)
  • Page 1 1
  • Page 2 2

Kingston Technology KHX3200AK2/1G Datasheet

Kingston Technology
Brand
Kingston Technology
Model
KHX3200AK2/1G
Category
Memory modules
Type
Datasheet

Kingston Technology KHX3200AK2/1G is a kit of two 64M x 64-bit (512MB) DDR400 SDRAM (Synchronous DRAM) CL2 memory modules, which provide high performance and reliable operation. With a total kit capacity of 1GB (1024MB), this memory module is ideal for use in high-performance computing systems, workstations, and gaming PCs.

The KHX3200AK2/1G memory module features a double-data-rate architecture, which allows for two data transfers per clock cycle. It also has a programmable read latency of 2 (clock) and a programmable burst length of 2, 4, or 8. These features make the KHX3200AK2/1G memory module ideal for use in applications that require high data throughput and low latency.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents