Sunix SATA4000 Specification

  • Hello! I am an AI chatbot trained to assist you with the Sunix SATA4000 Specification. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
SUNIX Taiwan Headquarters
http://www.sunix.com.tw
SUNIX Vertriebs Gmbh
http://www.sunix-europe.com
SUNIX do Brasil Ltda.
http://www.sunix-brasil.com.br
SUNIX USA Corp.
http://www.sunix-usa.com
Introduction
Introduction
SUNIX SATA4000 is PCI Serial-ATA RAID Host Controller which provides an efficient and economical way for
users increasing the speed or fault-tolerance of their PC. SUNIX SATA4000 supports a 32-bit 33MHz PCI bus
and the Serial ATA generation 1 specification transfer rate of 1.5 Gbit/s (150MB/s). It can upgrade your desktop
computer to have four internal Serial ATA channels with RIAD features. SUNIX SATA4000P is the best solution
for users to access new-generation SATA storage devices with 0, 1, or 0+1 RAID function, such as hard disk
drives and DVD-ROM drives.
Features
Features
• Fully compatible with PCI 33/66MHz fully Spec. Ver2.3 standard.
• Support Serial ATA Specification 1.0.
• Fully compliant with Serial ATA 1.5G specifications
• Expand four (4) internal high speed native Serial ATA interface ports.
• Four Pin header on board for LED connection..
• Support RAID 0 / 1 / 0+1 / 5 . (RAID 5 function supports by loading different firmware)
• Support Windows, Linux, Novell Netware O.S.
• Certificated with CE, FCC, RoHS, and Microsoft WHQL approval.
SATA4000
SATA4000
Serial ATA 4-Channel
PCI RAID Controller
Specification
Specification
Interface: PCI 32-bit 33/66MHz
Mode: Serial-ATA Generation 1st
Chipset: Silicon Image Sil3114a
Port: 4 Internal Serial ATA Port
Speed: Max. 1.5Gbps
O.S. Support : Windows 98SE / ME / NT4.0/ 2000 / XP / 2003 / Vista, Linux, Novell Netware. (X86/x64)
Packages
Packages
• SATA4000
• CD Driver
• User’s Manual
/