TP-LINK Archer MR200 Quick Installation Manual

  • Hello! I am an AI chatbot trained to assist you with the TP-LINK Archer MR200 Quick Installation Manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Quick Installation
Guide
• Deutsch • English • Español • Eλληνικά • Français
• Italiano • Português • Suomi • Nederlands • Svenska
• Norsk • Dansk • Türkçe
Wireless Dual Band 4G LTE Router
TP-LINK TECHNOLOGIES CO., LTD. South Building(floors 1,3,4,5) and 28(floors 1-4), Central Science
& Technology Park, Shennan Rd, Nanshan, Shenzhen, China
TP-LINK Deutschland GmbH Robert-Bosch-Straße 9, 65719 Hofheim am Taunus, Germany
TP-LINK UK Limited Unit 2 & 3 Riverview (142-144), Cardiff Road, Reading, RG1 8EW
TP-LINK Italia S.r.l.
Via Gobetti 2/A 20063 Cernusco sul Naviglio (MI)
TP-LINK France SARL
Bâtiment Equateur 16-18 avenue Morane Saulnier 78140
Vélizy-Villacoublay France
TPLINK Bilgi Teknolojileri Tic. Ltd. Şti. Şerifali Mevkii, Barbaros Cad. Söyleşi Sokak. No:15/2 Kat:3/4
34775 Ümraniye/İstanbul
TP-LINK IBERIA,S.L. C/ Quintanavides 15, Bajo A, 28050 Madrid, Spain
TP-LINK Netherlands B.V.
Archimedesbaan 18, 3439 ME Nieuwegein
TP-LINK(NORDIC) AB
Årstaängsvägen 21 C, 117 43, Stockholm, Sweden
TP-LINK Hellas Ltd. Marathonodromou 77, Marousi 151 24, Greece
NWS.TP-LINK Portugal, Unipessoal, Lda.
Avenida da Liberdade, n°129, 7°B,1250-140 Lisboa, Portugal
TP-LINK TECHNOLOGIES CO., LTD.
Specifications are subject to change without notice. TP-LINK is a registered trademark of TP-LINK
TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks
of their respective holders.
No part of the specifications may be reproduced in any form or by any means or used to make any
derivative such as translation, transformation, or adaptation without permission from TP-LINK
TECHNOLOGIES CO., LTD. Copyright © 2015 TP-LINK TECHNOLOGIES CO., LTD. All rights reserved.
www.tp-link.com
MADE IN CHINA
7106505794 REV1.0.0
5
1
3
2
Plug and Play
5
Enjoy the Internet.
Wired: Connect your computers to the router's LAN ports via
Ethernet cables.
Wireless: Connect using the SSID (network name) and Wireless
Password printed on the product label at the bottom of the router.
Customize the 4G LTE Router
1. Make sure your computer is connected to the
router (via wired or wireless).
2. Launch a web browser and type in
http://tplinkmodem.net or 192.168.1.1. Create a
new password (1-15 characters) and click Save.
Note: If the login page does not appear, please refer to FAQ > Q1.
http://tplinkmodem.net
HighMiddleLow
Save
Conrm Password
New Password
Turn on the
router.
Install the 4G LTE
antennas and position
them upwards.
Insert the SIM card into the slot until you
hear a click.
Note: Micro or Nano-SIM card must be
converted using a standard SIM card
adapter provided by TP-LINK.
4
Verify the hardware connection by checking
the following LEDs’ status. If the Internet LED
is on, your router is connected to the
Internet successfully.
Power On
Internet On
Wireless On
For better Internet connection, make sure 3 to 4 bars of the Signal
Strength LED
are lit. Otherwise, relocate the router to a location
that receives a strong mobile Internet signal, such as near a window.
Wireless
Wired
6
English
3. Enter the new password that you created and click
Login.
Note: For subsequent logins, use your password that you have created.
4. Select your Region and Time Zone, then click
Next.
United Kingdom
(GMT) Greenwich Mean Time: Dublin, Edingburgh, London, Lisbon
Region:
Time Zone:
Next
5. Follow the step-by-step instructions of the
Quick Setup to complete the initial configuration.
On the Wireless Settings page, you can customize
your 2.4GHz and 5GHz wireless network names and
passwords.
Note: The router can also be used (or configured) in Wireless Router Mode for
ADSL/Cable connections. For more advanced configurations, please refer to the
User Guide on TP-LINK official website at www.tp-link.com.
Next
Back
Wireless Network (2.4GHz):
Password:
TP-LINK_XXXX
XXXXXXXX
Wireless Network Name (SSID):
Enable
Wireless Network (5GHz):
Password:
TP-LINK_XXXX_5G
XXXXXXXX
Wireless Network Name (SSID):
Enable
LED Indicators
LED Status Indication
Power
On System initialization complete.
Flashing
System initializing or firmware upgrading is in process.
Do not disconnect or power off the router.
Off Power is off.
Internet
On Internet connection is available.
Off No Internet connection.
4G
On The router is using the 4G network.
Off
The router is using another network other than the 4G
network.
Wireless
On
At least one wireless radio band (2.4 GHz or 5 GHz) is
enabled.
Off The wireless radio band is disabled.
LAN
On At least one LAN port is connected.
Off No LAN port is connected.
WPS
On/Off
Turns On when a WPS synchronization is established
and automatically turns Off about 5 minutes later.
Flashing
A wireless device is trying to connect to the network
via WPS. This process may take up to 2 minutes.
7
English
LED Indicators
LED Status Indication
Signal Strength
On
Indicates the mobile Internet signal strength the router
receives in the current location. More lit bars indicates
a better signal strength.
Off No signal.
FAQ (Frequently Asked Questions)
Q1. What can I do if the login page does not
appear?
A1. Verify that the computer is set to obtain an IP address
automatically from the router.
A2. Verify that http://tplinkmodem.net or 192.168.1.1 is
correctly entered in the web browser and press Enter.
A3. Use another web browser and try again.
A4. Reboot your router and try again.
A5. Disable and enable the active network adapter and try
again.
Q2. What can I do if I cannot access the Internet?
A1. Verify that your SIM card is an LTE, WCDMA or GSM card.
A2. Verify that your SIM card is in your ISP’s service area.
A3. Verify that your SIM card has sufficient credit.
A4. Check the LAN connection:
Open a web browser and enter http://tplinkmodem.net
or 192.168.1.1 in the address bar. If the login page does
not appear, refer to FAQ > Q1 and then try again.
A5. Check your ISP parameters:
1) Open a web browser and log in to the web management
page.
2) Go to Advanced > Network > Internet to verify the
parameters (including the APN, Username and Password)
provided by your ISP are correctly entered. If the
parameters are incorrect, click Create Prole and enter
the correct parameters, then select the new profile from
the Profile Name list.
A6. Check the PIN settings:
1) Open a web browser and log in to the web management
page.
2) Go to Advanced > Network > PIN Management to verify
if PIN is required. If it is, enter the correct PIN provided by
your ISP or disable PIN Lock, and click Save.
A7. Check the Data Limit:
1) Open a web browser and log in to the web management
page.
2) Go to Advanced > Network > Data Settings to verify if
the Total Used exceeds the Total Allowance. If it does,
click Correct and set Total Used to 0 (zero), or disable
Data Limit.
A8. Check the Mobile Data:
1) Open a web browser and log in to the web management
page.
2) Go to Advanced > Network > Internet to verify that
Mobile Data is enabled. If not, toggle it On to access the
Internet.
8
English
A9. Check the Data Roaming:
1) Confirm with your ISP if you are in a roaming service area.
If you are, open a web browser and log into the web
management page.
2) Go to Advanced > Network > Internet to verify that
Data Roaming is enabled. If not, toggle it On to access
the Internet.
Q3. How do I restore the router to its factory
default settings?
A1. With the router powered on, press and hold down the
WPS/RESET button on the rear panel of the router until
the Power LED starts flashing. The router will restore and
reboot automatically.
A2. Log in to the web management page of the router, and
go to Advanced > System Tools > Backup & Restore,
click Factory Restore and wait until the reset process
completes.
Q4. What can I do if I forget my web management
page password?
A. Refer to FAQ > Q3 to restore the router and then set a new
password using 1-15 characters.
Q5. What can I do if I forget my wireless network
password?
A1. The default Wireless Password is printed on the product
label of the router.
A2. If the default Wireless Password has been changed, log in
to the router's web management page and go to Basic >
Wireless to retrieve or reset your password.
WPS/RESET Button - Press
and hold until the Power LED
starts flashing.
Deutsch
Sicherheitsinformation
Hat ein Produkt eine POWER-Taste, kann das Gerät damit komplett abgeschaltet werden. Produkte ohne POWER-Taste können
einzig und allein durch Trennen des Spannungsadapters komplett ausgeschaltet werden. Das von der Spannungsversorgung
getrennte Gerät behält jedoch seine Konfiguration.
Öffnen Sie dieses Produkt nicht und versuchen Sie nicht, es zu warten oder zu reparieren. Sie könnten Spannungsschlägen oder
anderen Gefahren ausgesetzt sein. Das Entfernen oder Beschädigen eines Siegels lässt die Garantie erlöschen. Bitte wenden Sie
sich an uns, wenn Ihr Gerät defekt ist.
Betreiben Sie dieses Produkt nicht in der Nähe von Wasser.
3 Jahre eingeschränkte Produktgarantie von TP-LINK
Nur für Original-TP-LINK-Produkte.
DIESE GARANTIE VERLEIHT IHNEN BESTIMMTE RECHTE, DIE VON DEM VERKAUFSLAND ABHÄNGIG SEIN KÖNNEN.
BIS ZU DEN GESETZLICHEN GRENZEN ERSETZEN DIESE GARANTIE UND DIESE HILFESTELLUNGEN ANDERSARTIGE GARANTIEN,
HIFLESTELLUNGEN UND KONDITIONEN.
TP-LINK garantiert für einen einwandfreien Zustand von originalverpackten TP-LINK-Geräten hinsichtlich Funktion und
Materialverarbeitung, normale Benutzung vorausgesetzt, über einen Zeitraum von 3 Jahren ab Kauf durch den Endverbraucher.
English
Safety Information
When a product has a power on/off button, the power on/off button is one way to turn-off the product. For products without
the on/off button, the only way to completely turn-off the product is to disconnect the product or the power adapter from the
power source. The disconnected device shall remain readily operable.
Do not open this product or attempt to service it; it may expose you to dangerous high voltage or other risks. Opening a sealed
component or sealed product/s will void the warranty. For product servicing, please contact us.
Do not operate this product near water.
TP-LINK Three Years Limited Product Warranty
For TP-LINK Branded Products Only.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE (OR
BY COUNTRY OR PROVINCE).
TO THE EXTENT ALLOWED BY LOCAL LAW, THIS WARRANTY AND THE REMEDIES SET FORTH ARE EXCLUSIVE AND IN LIEU OF ALL
/