Amprobe BAT-200 User manual

Category
Cable network testers
Type
User manual

This manual is also suitable for

Amprobe BAT-200 is a universal battery tester that allows you to quickly check the condition of your standard and rechargeable batteries. It features an easy-to-read color-coded display with “Good”, “Low” and “Replace/Recharge” indicators. You can use it to test 1.5V batteries like AAA, AA, C, D, and 9V batteries.

Amprobe BAT-200 is a universal battery tester that allows you to quickly check the condition of your standard and rechargeable batteries. It features an easy-to-read color-coded display with “Good”, “Low” and “Replace/Recharge” indicators. You can use it to test 1.5V batteries like AAA, AA, C, D, and 9V batteries.

User Manual
• Mode d’emploi
• Bedienungshandbuch
• Manual d’Uso
• Manual de uso
BAT-200
Battery Tester
BAT-200
Battery Tester
Users Manual
September 2009, Rev.1
©2009 Amprobe Test Tools.
All rights reserved. Printed in China
English
Limited Warranty and Limitation of Liability
Your Amprobe product will be free from defects in material and
workmanship for 1 year from the date of purchase. This warranty
does not cover disposable batteries or damage from accident,
neglect, misuse, alteration, contamination, or abnormal conditions
of operation or handling. Amprobe’s warranty obligation is
limited, at Amprobe’s option, to refund of the purchase price,
free of charge repair, or replacement of a defective product . To
obtain service during the warranty period, return the product
with proof of purchase to an authorized Amprobe Test Tools
Service Center or to an Amprobe dealer or distributor. This
warranty is your only remedy . All other warranties - whether
express, implied or statutory - including implied warranties of
fitness for a particular purpose or merchantability, are hereby
excluded. Neither Amprobe nor its parent company or affiliates
shall be liable for any special, indirect, incidental or consequential
damages or losses, arising from any cause or theory. Since some
states or countries do not allow the exclusion or limitation of an
implied warranty or of incidental or consequential damages, this
limitation of liability may not apply to you.
Repair
All test tools returned for warranty or non-warranty repair or
for calibration should be accompanied by the following: your
name, company’s name, address, telephone number, and proof of
purchase. Additionally, please include a brief description of the
problem or the service requested and include the test leads with
the meter. Non-warranty repair or replacement charges should be
remitted in the form of a check, a money order, credit card with
expiration date, or a purchase order made payable to Amprobe®
Test Tools.
In-Warranty Repairs and Replacement – All Countries
Please read the warranty statement and check your battery before
requesting repair. During the warranty period any defective test
tool can be returned to your Amprobe® Test Tools distributor
for an exchange for the same or like product. Please check the
“Where to Buy” section on www.amprobe.com for a list of
distributors near you. Additionally, in the United States and
Canada In-Warranty repair and replacement units can also be sent
to a Amprobe® Test Tools Service Center (see address below).
Non-Warranty Repairs and Replacement – US and Canada
Non-warranty repairs in the United States and Canada should be
sent to a Amprobe® Test Tools Service Center. Call Amprobe® Test
Tools or inquire at your point of purchase for current repair and
replacement rates.
In USA In Canada
Amprobe Test Tools Amprobe Test Tools
Everett, WA 98203 Mississauga, ON L4Z 1X9
Tel: 877-AMPROBE (267-7623) Tel: 905-890-7600
Non-Warranty Repairs and Replacement – Europe
European non-warranty units can be replaced by your Amprobe®
Test Tools distributor for a nominalv charge. Please check the
“Where to Buy” section on www.amprobe.com for a list of
distributors near you.
European Correspondence Address*
Amprobe® Test Tools Europe
In den Engematten 14
79286 Glottertal, Germany
Tel.: +49 (0) 7684 8009 - 0
*(Correspondence only – no repair or replacement available from
this address. European customers please contact your distributor.)
1
BAT-200 Battery Tester
1
2
3
Battery Condition Meter
1.5v Battery Terminal Contactor Caliper
9v Battery Terminal Contactors
12
3
2
3
SYMBOLS
Caution! Refer to the explanation in this Manual
Conforms to relevant Australian standards
Complies with European Directives
Do not dispose of this clamp meter as unsorted
municipal waste. Contact a qualified recycler for
disposal.
WARNING and PRECAUTIONS
• Do not operate this instrument in the presence
of gasoline, natural as, propane, or in other
combustible atmospheres.
• The battery tester is activated by the battery
being checked. Keep test time as short as possible,
to avoid uneccessary battery drain.
UNPACKING AND INSPECTION
Your shipping carton should include:
1 BAT-200 Battery Tester
1 Users manual
If any of the items are damaged or missing, return
the complete package to the place of purchase for an
exchange.
INTRODUCTION
Check the batteries! Battery failure is often the common
cause for the sensor or instrument failure. Simple to use!
Portable universal battery tester for the standard and
rechargeable types batteries.
2
3
FEATURES
• Measuring for Multiple battery types
• Available for 1.5V and 9V battery
• Easy-to-read color-coded display with “Good”,
Low” and “Replace/Recharge” indicators
• Works with standard and rechargeable batteries
OPERATION
Reading The Meter
For 1.5V and 9V batteries, read off upper scale.
Connect the 1.5V Battery
Connect the 9V Battery
For 1.5V button cells, read off “BUTTON BATT” scale.4.
R
E
P
L
A
C
E
B
U
T
T
O
N
B
A
T
T
G
O
O
D
L
O
W
If needle does not move,check that battery is touching
both contacts before assuming that it is completely dead.
The Battery Tester may be used to test the following
sizes:
1.5V AAA, SH16, MN2400, R03
AA, HP7, MN1500, UM3
C, HP11.MN1400, SO11, LR14, UM2
D, HP2, MN1399, SP2, R20,UM1
9V PP3,MN1604,6F22,006P
Red = Replace
Yellow = Low Power
Green = Good
Connect the 1.5V button cells
1
INDICE
SIMBOLI ............................................................................. 2
DISIMBALLAGGIO E ISPEZIONE ........................................ 2
INTRODUZIONE ................................................................. 2
CARATTERISTICHE ............................................................. 3
FUNZIONAMENTO ............................................................. 3
1
ÍNDICE
SÍMBOLOS .......................................................................... 2
DESEMBALAJE E INSPECCIÓN ........................................... 2
INTRODUCCIÓN ................................................................. 2
CARACTERÍSTICAS ............................................................. 3
FUNCIONAMIENTO ............................................................ 3
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44

Amprobe BAT-200 User manual

Category
Cable network testers
Type
User manual
This manual is also suitable for

Amprobe BAT-200 is a universal battery tester that allows you to quickly check the condition of your standard and rechargeable batteries. It features an easy-to-read color-coded display with “Good”, “Low” and “Replace/Recharge” indicators. You can use it to test 1.5V batteries like AAA, AA, C, D, and 9V batteries.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI