Sunstech TLEXI1663HD User manual

USER'S MANUAL

Read this manual carefully and retain for future reference

16” LED Television

TLEXI1663HD

1

2. SAFETY PRECAUTIONS

1. PREFACE

3. IN THE CARTON

4. FRONT BACK CONNECTIONS OF LED

Power Cord Connection

VGA Connection

USB Connection

Antennas Connection

HDMI Connection

AV Connection

7. Menu Operation

6. REMOTE CONTROL

5. TV INSTALLATION DRAWINGS

YPbPr Connection

SCART Connection

Remote Control Setup

9. TROUBLESHOOTING AND ADVICE

Remote Control Instructions in DTV mode

Remote Control Instructions in Teletext/Media mode

Select Input Source

Picture Menu

Sound Menu

Channel Menu

Feature Menu

Earphone Connection

Remote Control Instructions in DVD mode

Setup Menu

Media Menu

8. DVD Operation

10. SPECIFICATIONS

How to user Record

How to user Timeshift

Warranty Conditions

2

6

7

9

8

12

19

18

17

23

37

11

10

11

14

16

26

15

34

38

28

30

29

39

PREFACE

Thank you for buying this TV ! Please read this manual thoroughly before operating the

TV Makesure the TV was not damamaged in transit. Should the TV is damaged, do no

install it and contactyour dealer Check that you have all the accessories according to

the model.

Safety Precautions

Read the following recommended safety precautions carefully.

Power Source

Before plugging in for the first time, read the following section carefully.

This device should be operated only from a 220-240V AC, 50 Hz outlet.

If your model include car adaptor, 12V DC supply when using the device with car charger.

Be sure that the power supply voltage of the area be used meets the required voltage

and you select the correct voltage setting for your device.

Power Cord

Do not place the set, a piece of furniture, etc on the power cord or pinch the cord.

Handle the power cord by the plug. Do not unplug the appliance by pulling from

the power cord and never touch the power cord with wet hands as this could cause a

short circuit or electric shock.

Never make a knot in the cord or tie it with other cords. The power cord should be

placed in such a way that they are not likely to be stepped on. A damaged power

cord can cause re or give you an electric shock. When it is damaged and needs to

be replaced, it should be done by quali ed personnel.

Moisture and Water

Do not use this device in a humid and damp place (avoid

the bathroom, the sink in the kitchen, etc). Do not

expose this device to rain or water, as this may be

dangerous and do not place objects lledwithliquids,

such as ower vases, on top.

If any solid object or liquid falls into the cabinet, unplug

the connected device(s) immediately and have it checked by quali ed personnel

before operating it any further.

Cleaning

Before cleaning, unplug this device from the wall outlet.

Do not use an aggressive liquid or aerosol cleaners. Use a

soft and dry cloth.

Ventilation

The slots and openings on the device are intended for ventilation and to ensure

2

reliable operation.

To

prevent overheating, these opening must not be blocked or

covered in anyway. When installing this unit make sure to leave space sucient

around the unit to ensure the ventilation to improve heat radiation.

Do not expose the unit to extreme conditions of heat, cold or moisture

Heat and Flames

The device should not be placed near to open ames or

sources of intense heat such as an electric heater.

Ensure that no open ame sources, such as candles, are

placed on top of the device. Batteries should not be

exposed to excessive heat such as sunshine, re or the

like.

Lightning

In case of storm and lightning or when going on holiday,

disconnect the power cord from the wall outlet.

Replacement Parts

When replacement parts are required, make sure that the service technician has used

replacement parts, which are specied by the manufacturer or have the same

specications as the original one. Unauthorized substitutions may result in re,

electrical shock or other hazards. Please contact the brand or manufacturer that will

redirect you to the nearest technical service which will supply or change the

replacement parts

Servicing

Please refer all servicing to qualied personnel of the

brand. Do not remove the cover yourself as this may

result in an electric shock.

Ventilation

The slots and openings on the device are intended for ventilation and to ensure

3

Risk of electric shock

The lightning ash with arrowhead symbol, within an equilateral triangle, is intended

to alert the user to the presence of not insulate,

“

dangerous voltage

”

within the

product

’

s enclosure that may be of sucient magnitude to constitute a risk of electric

shock of persons.

The exclamation point within an equilateral triangle is intended to alert the user to

the presence of important operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

Waste Disposal

Instructions for waste disposal:

- Packaging and packaging aids are recyclable and should principally be recycled.

Packaging materials, such as a plastic bag, must be kept away from children.

- Batteries, including those which are heavy metal-free, should not be disposed of

with household waste. Please dispose of used batteries in an environmentally

friendly manner. Find out about the legal regulations which apply in your area- Do

not try to recharge batteries, can have a danger of explosion. Replace batteries only

with the same or equivalent type.

This symbol on the product or on its packaging means that your electrical device

should be disposed at the end of its service life, separately from your household

wastes. There are separate collection systems for recycling in the EU. For more

information, please contact the local authority or the dealer where you purchased

the product.

Symbol for equipment Symbol for

batteries

Disconnecting the Device

The mains plug is used to disconnect the device from the mains and therefore it must

remain readily operable.

4

Warning:

Installation

Headphone Volume

Electrical device notin the hands of children

5

6

3. IN THE CARTON

Remote Control

1.5V

AAA Batteries

TV SET

USER'S MANUAL

User's Manual

LIST

4. FRONT & BACK CONNECTIONS OF LED

Back View and Control Connections

7

1. Press“EJECT” to eject DVD disc.

2. Press“PLAY” to play DVD disc.

3. Press“SOURCE”to select the input source.

4. Press “MENU”to bring up the main menu on the screen.

5. Press“CH+”or “CH-”

.

6. Press“VOL+”or “VOL-”to increase or decrease the sound level.

7. Press“POWER” button to turn standby mode on or off.

8.

.

9.

.

to change channels

ON/OFF LED Indicator: Shows red in standby mode and green while your TV is turned on

IR Sensor: Infrared sensor for the remote control

HDMI VGA

PC

AUDIO

RF IN

12

3

4

5

678 10

USB

DC12V IN

9

SCART

YPbPr

11

CI Port

AV

1.DC 12V IN: DC input socket.

USB: Connect tothe External drive.

. SCART: Connect the SCART output jack of

VCR or DVD.

. YPbPr: Connect the YPbPr output jack of DVD

or VCR.

8. CI Port: Connect to the CI card.

9 AV ConnecttheVideoAudio outputjack of DVD

or VCR.

10

.

2.

3. HDMI: Connect the HDMI output jack of DVD.

4. VGA: Connect the PC-RGB output jack of PC.

5. PC AUDIO : Connect the right Audio out put jack

of PC.

. RF IN: Connect the antenna.

11

6

. : /

7

: Connect to a headphone set.

Front View

5. TV INSTALLATION DRAWINGS

75 OHM

ANTENNA

PLUG

POWER PLUG OF

ANTENNA

AMPLIFIER

OUTDOOR

ANTENNA

AMPLIFIER

VHF

ANTENNA UHF

ANTENNA

INDOOR

ANTENNA

AMPLIFIER

8

Power Cord Connection

Antennas Connection

- Connect the power cord correctly as shown.

- Press the POWER switch of your LED TV to switch on the LED TV.

The power indicator on the front panel lights up in Green or Blue.

RF IN

To ensure good picture and sound, TV antenna system needs to be installed. The antenna system as

Shown can be soured from TV equipment shops, which will provide service for correct installation

and connection. After installation, insert the 75-ohm antenna plug into the antenna jack as shown.

DC12V IN

HDMI VGA

PC

AUDIO

USB

DC12V IN

SCART

YPbPr

HDMI VGA

PC

AUDIO

USB

DC12V IN

SCART

YPbPr

9

The HDMI input connection enables the digital transfer of audio/video/control signals through one

cable only.

HDMI Connection

VGA Connection

TV Back

Connect the RGB output of the PC to the VGA jack on the set. Connect the AUDIO output of the

PC to the PC AUDIO jack on the set . Select the VGA input source with using INPUT button on

the remote control.

HDMI Cable

DVD or VCR

DVD or VCR Back

TV Back

Audio CableVGA Cable

Audio

PC OUTPUT

RF INCI Port

AV

HDMI VGA

PC

AUDIO

USB

DC12V IN

SCART

YPbPr

HDMI VGA

PC

AUDIO

USB

DC12V IN

SCART

YPbPr

10

SCART

Connection

Connect the SCART connector to the external video item and the SCART connector on the tv.

The SCART lead operates as an Input/Output connection. If the tv does not select the SCART

input automatically, select SCART using the INPUT button on the remote control or tv.

TV Back

DVD or VCR

Scart Cable

DVD or VCR Back

Insert the USB flash drive to the USB port. Select USB channel source via the SOURCE button

on the remote control.

TV Back

USB Connection

USB Port

Earphone Connection

Connect to earphone.

Earphone

TV Back

HDMI VGA

PC

AUDIO

USB

DC12V IN

SCART

YPbPr

RF INCI Port

AV

RF INCI Port

AV

11

Connect the VIDEO and AUDIO output jack of the DVD or VCR to the VIDEO jacks on the

TV set

using

the RCA cable. Match the jack colors: Video is yellow, Audio left is white, and Audio right is red.

Select the AV input source via the SOURCE button on the remote control.

TV Back

Connect the YPbPr output of the DVD or VCR to the YPbPr input on the TV set. Connect the Audio

output of the DVD or VCR to the Audio input jacks on the TV set using the RCA cable.

Match the jacks colors : Y is green, Pb is blue, Pr is red, Audio left is white and Audio right is red.

Select Component input source via the SOURCE button on the remote control.

AV Connection

YPbPr Connection

TV Back

AUDIO input connector

Y

Pb

Pr

Pb

Y

Pr

Mini video transfer cable

Video Cable (RCA)

DVD or VCR back

DVD or VCR

L R

AUDIO input

Connector

L

VIDEO

R

AUDIO input connector

VIDEO

L

R

L

R

VIDEO

Mini video transfer cable

Video cable (RCA)

DVD or VCR back

DVD or VCR

6. REMOTE CONTROL

12

Remote Control Instructions

in

DTV

mode

POWER

Turn the LED TV ON or OFF.

MUTE

Press to mute the sound. Press again or press VOL+ to

un-mute the

TV.

P.MODE

Press to select the picture modes.

S.MODE

Press this button to change the audio mode.

DISPLAY

Press to display the source and channel's information.

NICAM

Press to select the NICAM modes.

AUDIO

Audio s

elect button.

NUMBER BUTTONS

The numerical keys are used for editing the name of the

channel.

Return to t

he previous channel viewed.

-/--

Press this button to enter Channel List.

TV MENU

Press to enter or exit

the setup menu.

EXIT

Press to exit all the OSD on the screen.

GUIDE

Press to display the channel guide me

nu.

SOURCE

Press SOURCE to display the OSD input source, Press ▲ ▼

to select an input source, and then

press ENTER to confirm.

THUMBSTICK( ▲ / ▼ / ENTER)

Allows you to navigate the on-screen menus and adjust

the

system settings to your preference.

CH+/CH-

Press to scan through channels.

VOL+/VOL-

Press to increa

se/decrease the sound level.

AUTO

Press to do auto configuration directly(In VGA mode).

LIST

/

▼

/

13

Remote Control Instructions

in

DTV

mode

LIST

◄◄

Playing backward fast in timeshift mode.

►►

Playing forward fast in timeshift mode.

(Timeshift)

Press to perform the Timeshift function.

NOTE:Select Time Shifting Mode "off" in the menu, then the

"teletext" can be available.

Press to stop recording.

ZOOM

Zoom can change display size.

SLEEP

Lets you select amount of time before your TV turn itself off

automatically.

Color button

Color buttons (respectively red, green, yellow and blue)

used in a few sub-menus.

TV/RADIO

When watching a channel, allows you switch between TV

and Radio modes.

FAV

Displays the selected favorite programmers.

FAV-

Displays the selected favorite down programmers.

FAV+

Displays the selected favorite up programmers.

SUBTITLE

In DTV mode, Press to select alternate subtitle languages

during view/playback of a DTV program.

Record button.

14

Remote Control Instructions

in

Teletext

/

Media

mode

LIST

NUMBER BUTTONS

Press 0-9 to select a teletext page.

CH+/CH-

Page up and page down.

▲/ ▼

Page up and page down.

TEXT

Switch on or off the teletext mode.

Select Time Shifting Mode "off" in the menu, then the

“teletext" can be available.

HOLD

Hold on or off for current page display.

SUBPAGE

Sub coded page access.

REVEAL

Reveal or hidden the hidden words.

◄◄

Playing backward fast.

►►

Playing forward fast.

INDEX

Request the index page.

SIZE

Change display size in teletext mode.

Skip backward button.

Skip forward button.

Press to pause the playback.

Press to stop playing.

ZOOM

Zoom can change display size.

SLOW

Slow in USB and DVD mode.

MEDIA

Press to display the MEDIA menu.

Color button

Color buttons (respectively red, green, yellow and blue)

used in a few sub-menus.

REPEAT

Repeatedly play the title or chapter continuous.

GOTO

It is possible to get access to any point on the directly

using the "GOTO" menu.

A-B

This button enables you to repeat a selected section.

SUBTITLE

In Teletext mode, press to display P.100.

15

LIST

Remote Control Instructions

in

DVD

mode

To eject the disc.

Press to display information about the current mode on the

screen.

AUDIO

Audio select button.

DVD SETUP

Press to display the DVD setup menu.

◄◄

Playing backward fast.

►►

Playing forward fast.

Skip backward button.

Skip forward button.

Press to pause the playback.

Press to stop playing.

Number Buttons

Numerical buttons for various data.

ZOOM

Zoom can change display size.

SUB-T

To display subtitle in DVD mode.

A-B

This button enables you to repeat a selected section form

the disc.

PROG

Program a disc playing in a desired sequence.

DVD MENU

DVD disc menu access to menu.

GOTO

Press GOTO to access the "GOTO" menu.

STEP

Step in DVD mode.

REPEAT

Press REPEAT to cycle through the repeat play options.

ANGLE

Angle test.

DISPLAY

Remote Control Setup

1. Open the cover.

2. Usesthree A size batteries.When inserting the batteries, make sure correct polarities + and -

marks

AA “ ” “ ”

on the batteries line up correctly with compartment markings.

3.Replace the battery cover .

.

Place the remote control on a even surface and

insert the supplied batteries into the remote control as follows.

1. Softly push the back cover to open the battery compartment.

2. Insert two batteries(1.5V size AA ),please make sure the polarity matches the marks

inside the compartment.

Batteries

3. Softly press the back cover to close it.

16

7. Menu Operation

Select Input Source

Press INPUT button to display the input source list;

Press ▼ /▲ button to select the input source you want to watch;

Press OK button or ► button to enter the input source;

Press MENU button to display the main menu.

Press ▼ / ▲ b utton to select Picture in the main menu, then press OK button or ► button to enter.

1. Press ▼ / ▲ button to select the option that you want to adjust in the Picture menu, then press

OK button or ► b utton to enter.

2. Press ◄ button to adjust or press ▼ /▲ button to select.

3. After finishing your adjustment, Press MENU button to save and return back to the previous

menu, and press EXIT button to exit the entire menu.

Press ▼ / ▲ button to select Picture Mode, then press OK button or ► button to enter and press

▼/▲ button to select. Picture mode: Standard, Vivid, Soft, Optimal, User).

You can change the value of brightness, contrast, sharpness, colour, when the picture is in

mode.(You can press PICTURE button on the remote control to change the Picture Mode directly.)

Brightness

Press ▼ /▲ button to select Brightness, then press OK button or ► button to enter and press◄ /►

button to adjust.

Picture Mode

Standard

Picture Menu

Picture

Sound

Channel

Feature

Setup

Picture Mode

Brightness

Contrast

Sharpness

Colour

Colour Temperature

Noise Reduction

Picture

50

Standard

Middle

M

ENU

Ent er

Re turn

Mo

ve

Standard

ok

5

En

t

e

r

Exit

►

Tint

50

►

▼

▲

▼ / ▲

17

Input

SCART

TV

DTV

AV

YPBPR

DVD

HDMI

PC

Media

T

V

Picture

Channel

Feature

Setup

Sound Mode

Bass

Treble

Balance

AVL

Sound

Standard

50

Off

Sound

Contrast

Press ▼ /▲ button to select Contrast, then press OK button or ► button to enter and press◄

button to adjust.

-

+

Contrast

50

Sharpness

Press ▼ /▲ button to select Sharpness, then press OK button or ► button to enter and press◄

bu

tton to adjust.

Colour

Press ▼ /▲ button to select Colour, then press OK button or ► button to enter and

press◄ button

to adjust.

Tint(Not available in DTV)

Press ▼ /▲ button to select Tint, then press ◄ butto

n to enter and press ◄ button to adjust.

Press ▼ /▲ button to select Colour Temperature, then press ◄ b

utton to select standard, warm,

cool.

Press ▼ /▲ button to select Noise Reduction, then press ◄ button

to select Off, Low, Middle,

High.

Reset

Press ▼ /▲ button to select Reset, then press OK button or ► button to enter to reset sub-menu.

Colour Temperature

Noise Reduction

Sound Menu

Press MENU button to display the main menu.

Press ▼ / ▲ b utton to select Sound in the main menu, then press OK button or ► button to enter.

1. Press ▼/▲ b utton to select the option that you want to adjust in the Sound menu, then press OK

button or ► b utton to enter.

2. Press ◄ button to adjust or press ▼ / ▲ button to select.

3. After finishing your adjustment, Press MENU button to save and return back to the previous

menu, and press EXIT button to exit the entire menu.

Press ▼/▲ button to select Sound Mode, then press ◄ button to select. (Available Sound

mode: User, Speech, Music, Movie, Standard).

You can change the value of bass and treble, Balance, when the sound is in Standard mode.

TIPS: You can press SOUND button on the remote control to change the Sound Mode directly.

Bass(Avaliable just in USER Mode)

Press ▼/ ▲ button to select Bass, then press OK button or ► button to enter and press ◄ button 

to adjust.

Sound Mode

Surround

Reset

M

ENU

Ent er

Re tur

n

M

ov e

ok

Ente

r

Exit

E

xit

►

50

0

Off

ENTER

EQ

►

ENTER

/►

▼

▲

/►

▼

▲

/►

▼

▲

/►

▼

▲

/►

▼

▲

/►

▼

▲

OK

/►

▼

▲

/►

▼

▲

/►

▼

▲

▼

18

▼

Picture

Sound

Channel

Feature

Setup

Favorite Management

Auto Search

Digital Manual Search

Channel

Channel Management

Treble(Avaliable just in USER Mode)

Press ▼ /▲ button to select Treble, then press OK button or ► button to enter and press ◄ button

to adjust.

EQ/Balance/Surround

Press ▼ /▲ button to select EQ/Balance/Surro

und, then press OK button or ► button to enter and

press ◄ ► button to adjust.

AVL

Press ▼ /▲ button to select Auto Volume Level, then press ◄ button to select On or Off.

Reset

Press ▼ /▲ button to select Reset, then press OK button or ► button to enter to reset sub-menu.

Channel Menu

Press MENU button to display the main menu.

Press ▼ /▲ button to select Channel in the main menu, then press OK button or ► button to enter.

1. Press ▼/▲ b utton to select the option that you want to adjust in the Channel menu, then press

OK button or ► b utton to enter.

2. Press ◄ button to adjust or press ▼ / ▲ button to select.

3. After finishing your adjustment, press MENU button to save and return back to the previous

menu, and press EXIT button to exit the entire menu.

Channel Management

Press ▼/▲ button to select Channel Management, then press OK button or ►

button to enter.

►

M

ENU

Ent er

Re tur

n

Move

ok

Enter

Exit

E

xit

►

Country

Analogue Manual Search

ENTER

Spain

ENTER

►

ENTER

Channel-Channel Manager

No.

Program Name

0001

0002

0003

0004

0005

0006

0007

0008

0009

SwapSkip

DelLock

×

Enter

Menu

Rename ReturnMove

Page - +

CH+ -

BBC ONE

BBC News 24

BBC T OW

CBBC Channel

Favorite Manager

Press ▼ / ▲ button to select Favorite Manager, then press OK button or ► button to e

nter.

▼

/►

▼

▲

/►

▼

▲

▼

/►

▼

▲

▼

/►

▼

▲

▼

19

Page is loading ...

Sunstech TLEXI1663HD User manual

Sunstech TLEXI1663HD User manual

in other languages

Related papers

Other documents