Lexibook RCD108 Série User manual

Page is loading ...

13

English

13

Ce produit est couvert par notre garantie de 2 ans. Pour toute mise en œuvre de la garantie ou du

service après-vente, vous devez vous adresser à votre revendeur muni de votre preuve d’achat.

Notre garantie couvre les vices de matériel ou de montage imputables au constructeur à l’exclusion

de toute détérioration provenant du non-respect de la notice d’utilisation ou de toute intervention

intempestive sur l’article (telle que démontage, exposition à la chaleur ou à l’humidité…).

Note : Veuillez garder ce mode d’emploi, il contient d’importantes informations. Le contenu de

ce mode d’emploi peut changer sans préavis. Aucune partie de ce mode d’emploi ne doit être

reproduite sans le consentement écrit du fabricant.

Référence : RCD108series

Conçu et développé en Europe – Fabriqué en Chine

©LEXIBOOK®

LEXIBOOK S.A,

2, avenue de Scandinavie,

91953 Courtaboeuf Cedex

France

Pour vos demandes concernant un problème SAV ou une réclamation, composez le 01 84 88 58 58.

Pour toutes vos autres demandes (conseil d’achat, choix d’un produit, renseignement avant-vente

sur l’utilisation d’un produit …), composez le 08 92 23 27 26 (0,34€ TTC /minute).

http://www.lexibook.com

SAFETY PRECAUTIONS

!

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER

(OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

WARNING:

• To reduce the risk of re or electric shock, do not expose this appliance to rain or moisture.

• The apparatus shall not be exposed to dripping or splashing and that no objects lled with

liquids, such as vases, shall be placed on the apparatus.

• The mains plug is used as the disconnect device, the disconnect device shall remain readily

operable.

• In order to disconnect the apparatus from the mains completely, the mains plug should be

disconnected from the mains socket outlet completely.

The graphic symbols on the back cover of the set mean the following:

DANGEROUS VOLTAGE: The lightning ash with arrowhead symbol

within an equilateral triangle is intended to alert the user to the presence of

uninsulated “dangerous voltage” within the product’s enclosure that may be of

sufcient magnitude to constitute a risk of electric shock to persons.

ATTENTION: The exclamation point within an equilateral triangle is intended

to alert the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

DANGER: Invisible and hazardous laser radiation when open and interlock

failed or defeated. Avoid direct exposure to beam.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

DANGER

LASER SAFETY

This unit employs an optical laser beam system in the CD mechanism,

designed with built in safeguards. Do not attempt to disassemble, refer to

qualied service personnel. Exposure to this invisible laser light beam may be

harmful to the human eye.

THIS IS A CLASS-1 LASER PRODUCT. USE OF CONTROLS,

OR ADJUSTMENTS OR PROCEDURES OTHER THAN THOSE

SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS LASER

LIGHT BEAM EXPOSURE.

Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to

laser beam.

RCD108seriesIM1217_V09_217.indd 13 23/5/17 11:31 am

14

English

14

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions

5. Do not use this product near water and moisture, for example: near a bathtub, washbowl,

kitchen sink or laundry tub; in a wet basement; or near a swimming pool.

6. Clean only with a dry cloth. Unplug this product from the wall outlet before cleaning. Do

not use liquid cleaners or aerosol cleaners. It may damage the screen.

7. Do not block any ventilation openings. Install in accordance with manufacturer’s

instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including ampliers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized

plug has two blades with one wider than the other. A grounding type plug has two blades

and a third grounding prong. The wide blade or the third prong is provided for your safety. If

the provided plug does not t into your outlet, consult an electrician for replacement of the

obsolete outlet.

10.The socket-outlet shall be installed near the equipment and shall be easily accessible.

11. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

12. Only use attachments/accessories specied by the manufacturer.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualied service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is damaged,

liquid has been spilled or objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture does not operate normally, or has been dropped.

15. Do not overload wall outlet. Use only power source as indicated.

16. Use replacement parts as specied by the manufacturer.

17. Never push objects of any kind into this product through openings as they may touch

dangerous voltage points or short out parts that could result in re or electric shock. Never

spill or spray any type of liquid on the product.

18. The product may be mounted to a wall only if recommended by the manufacturer.

19. Upon completion of any service or repairs to this product, ask the service technician to

perform safety checks.

20. Only use with the cart, stand, tripod, bracket or table specied by the manufacturer or

sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

21. The apparatus should be operated only from the type of power source indicated on the

marking label. If you are not sure of the type of power supply to your home, consult your

appliance dealer or local power company. For apparatus intented to operate from battery

power, or other sources, refer to the operating instructions.

22. Do not attempt to service the apparatus yourself as opening or removing covers may

expose you to dangerous voltage or other hazards. Refer all servicing to qualied service

personnel.

23. The apparatus shall not be exposed to dripping or splashing and no object lled with

liquids, such as vases, shall be placed on the apparatus.

RCD108seriesIM1217_V09_217.indd 14 23/5/17 11:31 am

15

English

15

UNPACKING THE DEVICE

POWER SOURCES

When unpacking, ensure that the following elements are included:

1 x Radio CD player

1 x AC cable

1 x Instruction manual

WARNING: All packaging materials, such as tape, plastic sheets, wire ties and tags are not

part of this product and should be discarded.

The Radio CD Player operates on AC 230V ~ 50Hz or with 6 x 1.5V C/LR14 size

batteries (not included).

AC operation

1. Check that the unit is switched off.

2. Insert the small end of the AC cord into the AC socket at the back of the unit.

3. Plug the other end of the AC cord into any convenient mains power socket.

Battery installation

1. To install the batteries, open the battery compartment

located under the unit by pressing down on the tabs, then

lifting it up.

2. Insert 6 x 1.5V C/LR14 size batteries (not included)

observing the polarity indicated in the compartment, and as

per the diagram shown opposite.

3. Close the battery compartment.

Notes: The AC power cord must be disconnected from the

AC socket on the rear of the unit in order for the product to

operate on battery power.

On CD and AUX in mode, the unit goes to sleep after

approximately 10 minutes of inactivity. Press PLAY/PAUSE

button to leave the sleeping mode.

24. Mains plug is used as disconnect device and it should remain readily accessible during

intented use. In order to disconnect the apparatus from the mains completely, the mains plug

should be disconnected from the main socket outlet completely.

25. Minimum distance 10 cm around the apparatus for sufcient ventilation.

26. No naked ame sources such as lighted candles should be placed on the apparatus.

27. Attention should be drawn to the environmental aspects of battery disposal.

28. Use the apparatus in moderate climates.

29. Excessive sound pressure from earphones and headphones can cause hearing loss.

30. Maximum output voltage: ≤ 150mV.

31. Batteries shall not be exposed to excessive heat such as sunshine, re or the like.

32. Caution marking is located at the bottom of the apparatus.

33. The marking information is located on the back cover of the apparatus.

34. The ventilation should not be impeded by covering the ventilation openings with items,

such as newspapers, table-cloths, curtains, etc.

RCD108seriesIM1217_V09_217.indd 15 23/5/17 11:31 am

16

English

16

WARNING: Malfunction or loss of memory may be caused by strong frequency interference

or electrostatic discharge. Should any abnormal function occur, remove the batteries and

insert them again, or unplug the unit from the mains socket and re-plug it again.

CARE AND MAINTENANCE

Caring for compact discs

• Treat the disc carefully. Handle the disc only by its edges. Never

allow your ngers to come in contact with the shiny, unprinted side of

the disc.

• Do not attach adhesive tape, stickers, etc. to the disc label.

• Clean the disc periodically with a soft, lint-free, dry cloth. Never use detergents or abrasive

cleaners to clean the disc. If necessary, use a CD cleaning kit.

• If a disc skips or gets stuck on a section of the disc, it is probably dirty or damaged

(scratched).

• When cleaning the disc, wipe in straight lines from the

centre of the disc to the outer edge of the disc. Never

wipe in circular motions.

• This unit is designed to play only compact discs bearing

the identication logo as shown here. Other discs may not

conform to the CD standard and may not play properly.

• Discs should be stored in their cases after each use to

avoid damage.

• Do not expose discs to direct sunlight, high temperatures or dust, etc.

• Prolonged exposure or extreme temperatures can warp the disc.

• Do not stick or write anything on either side of the disc. Sharp writing

instruments, or ink, may damage the surface.

Cleaning the unit

• To prevent re or shock hazard, disconnect your unit from the AC power source when

cleaning.

• The nish on your unit may be cleaned with a dust cloth and cared for as other furniture.

Use caution when cleaning and wiping the plastic parts.

• Mild soap and a damp cloth may be used on the front panel.

B

E

N

E

N

E

S

o

l

u

t

i

o

n

e

t

o

y

a

n

t

e

Non-rechargeable batteries are not to be recharged. Rechargeable batteries are to be

removed from the product before being charged. Rechargeable batteries are only to be

charged under adult supervision. Different types of batteries or new and used batteries

are not to be mixed. Only batteries of the same or equivalent type as recommended are

to be used. Batteries are to be inserted with the correct polarity. Exhausted batteries are

to be removed from the product. The supply terminals are not to be short circuited. Do not

throw batteries into a re. Remove the batteries if you are not going to use the game for a

long period of time. Battery shall not be exposed to excessive heat such as sunshine, re

or the like.

RCD108seriesIM1217_V09_217.indd 16 23/5/17 11:31 am

17

English

17

LOCATION OF CONTROLS

FM RADIO OPERATION

Refer to the image p.2

1. Slide the FUNCTION switch to FM position.

2. Press the TUN + button to select the desired radio station.

3. Press the RESET button to return to the lowest radio frequency, 87.5 MHz.

4. Adjust the VOLUME control to set the sound level.

5. To turn off the radio, slide the FUNCTION switch to OFF position.

Note:

To ensure maximum FM tuner sensitivity, the FM antenna should be fully extended to obtain

the best possible reception. Avoid close proximity to the speakers and other electrical

appliances.

1. Volume control

2. Speakers

3. LED display

4. SKIP forward button

5. REPEAT button

6. SKIP backward button

7. POWER indicator

8. CD compartment lid

9. PROGRAM indicator

10. STOP button

11. PROGRAM button

12. PLAY/PAUSE/ECO PWR button

13. REPEAT indicator

14. FUNCTION switch (CD/AUX/FM)

15. TUNING button (TUN +)

16. RESET button

17. Audio jack

18. Aux in jack

19. AC socket

RCD108seriesIM1217_V09_217.indd 17 23/5/17 11:31 am

18

English

18

CD OPERATION

Play a CD

1. Lift the CD compartment lid, carefully place a disc on the centre spindle with the printed

label side facing up and close the CD compartment.

2. Slide the FUNCTION switch to CD position. The power indicator will light up and the LED

display will show the total number of tracks on the disc.

3. Press PLAY/PAUSE button and the CD will start playing from the rst track.

4. Adjust the VOLUME control to set the sound level.

5. To pause playback, press PLAY/PAUSE button. The playback indicator on the display will

ash.

6. To resume playback, press PLAY/PAUSE once again. The playback indicator will glow

steadily.

7. To stop playback, press STOP

SKIP FORWARDS / SKIP BACKWARDS buttons

1. When the CD is stopped, to play your favourite track directly, locate the desired track

using SKIP FORWARDS or SKIP BACKWARDS and press PLAY/PAUSE.

2. When listening to a CD, press SKIP FORWARDS to play the next track. Press SKIP

BACKWARDS once to skip to the beginning of the track currently playing. Press the same

button twice or more to play the previous tracks.

3. To search forward or backward through the playing track, press and hold SKIP

FORWARDS or SKIP BACKWARDS to locate a specic musical passage. The player will

move forward or backward at high speed as long as the button is pressed. Stop pressing the

button to return to normal playback.

Note:

• If a disc is installed incorrectly, dirty or damaged, it will not play.

• As each track is played, the track number is shown on the display.

• To prevent damage to the disc, never open the CD door while the disc is rotating. Wait for

the disc to stop before opening the CD door. Never touch the lens when the CD door is open.

• Do not use the carrying handle when playing CD. The product should only be used on a

steady surface.

CD REPEAT PLAY

1. During CD playback, press the REPEAT button once to repeat the current track. The

repeat indicator will ash on the display.

2. Press the REPEAT button twice to repeat all tracks on the CD. The repeat indicator will

glow steadily.

3. To cancel the repeat feature, press the REPEAT button successively until the indicator

turns off.

RCD108seriesIM1217_V09_217.indd 18 23/5/17 11:31 am

19

English

19

CD PROGRAMMED PLAY

AUX IN OPERATION

Use the program function to preselect the order in which a sequence of tracks will be played.

Up to 20 tracks can be programmed.

1. Slide the FUNCTION switch to CD position and insert a disc or make sure the unit is not

playing a disc.

2. Press the PROGRAM button. The program sequence “01” will blink on the LED display

and the program indicator will blink as well.

3. Use SKIP FORWARDS or SKIP BACKWARDS to select the rst track to include in the

programmed sequence.

4. Press PROGRAM to conrm and save the track.

5. Repeat steps 3 and 4 to program the other desired tracks.

6. Press PLAY to start playback. The tracks will be played in the programmed order.

7. Press STOP button once to stop playback, and press it twice to cancel the programmed

sequence. The program indicator will turn off once cancelled.

You can play music through the speakers of this Radio CD Player by connecting its AUX IN

jack to your MP3 or other digital audio player.

1. Plug one end of an audio cable (not included) into the AUX IN jack located at the back of

the unit, and the other end of the cable to the line out jack of the device you want to connect.

2. Slide the FUNCTION selector to the AUX position.

3. Adjust the VOLUME control to your desired listening level.

4. Use the function keys of your audio device to pause and resume the playback, adjust the

volume and select the next or the previous track.

5. To stop the music, remove the plug from the AUX IN jack.

HEADPHONE OPERATION

Set the volume to lowest before connecting your headphone (not included) into the

headphone jack. Headphones should have a 3.5mm diameter stereo plug and an impedance

of 8 – 32 ohms. When headphones are connected, the speakers are automatically

disconnected.

Note:

Extended listening of music at high volume may damage your hearing. It is highly

recommended to use at comfortable volume levels.

RCD108seriesIM1217_V09_217.indd 19 23/5/17 11:31 am

20

English

20

SIMPLIFIED EU DECLARATION OF CONFORMITY

We, Lexibook® S.A.

2, avenue de Scandinavie

91953 Courtaboeuf Cedex – France

Kind of product: Radio CD player

Type designation: RCD108series

Hereby, Lexibook Limited declares that the radio equipment type RCD108series is in

compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address:

http://www.lexibook.com/doc/rcd108/rcd108_1.pdf

Yiu Wai Man

Product Development Manager

10/05/2017 (Hong Kong)

RCD108seriesIM1217_V09_217.indd 20 23/5/17 11:31 am

21

English

21

WARRANTY

This product is covered by our 2-year warranty.

For any claim under the warranty or after sale service, please contact your distributor and

present a valid proof of purchase. Our warranty covers any manufacturing material and

workmanship defect, with the exception of any deterioration arising from the non-observance

of the instruction manual or from any careless action implemented on this item (such as

dismantling, exposition to heat and humidity, etc.). It is recommended to keep the packaging

for any further reference.

In a bid to keep improving our services, we could implement modication on the colours and

the details of the product shown on the packaging.

NOTE: Please keep this instruction manual, it contains important information.

Reference: RCD108series

Designed and developed in Europe - Made in China

©Lexibook®

United Kingdom & Ireland

For after-sales service, please contact our teams: 0808 1003015

http://www.lexibook.com

Environmental Protection

Unwanted electrical appliances can be recycled and should not be discarded

along with regular household waste! Please actively support the conservation

of resources and help protect the environment by returning this appliance to a

collection centre (if available).

This product

is not a toy.

MAINTENANCE

To prevent re or shock hazard, disconnect your unit from the AC power source when

cleaning. The nish on your unit may be cleaned with a dust cloth and cared for as other

furniture. Use a soft, clean cloth moistened with plain, lukewarm water to clean the exterior of

the unit. Use caution when cleaning and wiping the plastic parts. Mild soap and a damp cloth

may be used on the front panel.

Power supply: 230V AC ~ 50 Hz 15W or 6 x C/LR14 size batteries (9V )

FM: 87.5 - 108 MHz

To prevent possible hearing damage, do not

listen at high volume levels for long periods.

Ensure your player at low volume levels or power

off before you leaving. Fully understand user

manual before use.

WARNING: Prolonged use at full power of this

product might damage the ear of the user.

RCD108seriesIM1217_V09_217.indd 21 23/5/17 11:31 am

Page is loading ...

Lexibook RCD108 Série User manual

This manual is also suitable for

Lexibook RCD108 Série User manual

in other languages

Related papers

Other documents