Philips SCF215 User manual

Baby bottle warmer

SCF 215

Page is loading ...

6

Introduction

Congratulations on your purchase of the Philips Baby Bottle Warmer. The

Philips Baby Bottle Warmer is designed to heat food quickly and to keep

it warm. It is tted with a new temperature control system (PTC) that

meets the highest safety requirements. The click-step control knob allows

you to always set the correct food temperature. Thanks to its unique

design the Philips Baby Bottle Warmer ts all bottles and jars of baby

food. The Philips Baby Bottle Warmer is a high-performance product that

warms both bottles and jars of baby food, and belongs to a complete

range of Philips Baby-Care products.

Philips Baby-Care, Taking Care Together!

These instructions for use are applicable for two Philips Baby Bottle

Warmermodels:

Model SCF205; For use at home.

Model SCF215; For use at home and in the car (with extra car adapter).

Note: Please read these instructions carefully and retain for future

reference.

General description (Fig. 1)

1 Bottle and jar lifter

2 Hand grips

3 Mains plug

4 Click-step control knob

5 Indicator lamp

6 Rim

7 Container

8 Cable reservoir

9 Car adapter

Installation

For use at home

Before connecting the Baby Bottle Warmer to the mains, check to ensure

that the mains outlet is 230V AC.

ENGLISH

1 Place the Baby Bottle Warmer out of the reach of children and on a

dry, non-slip, horizontal surface.

2 Turn the click-step control knob 4 to the m position.

3 Unreel the required cable length from the cable reservoir 8 and

plug into the mains outlet.

For use in the car

1 Place the Baby Bottle Warmer out of the reach of children and on a

dry, non-slip horizontal surface.

2 Turn the click-step control knob 4 to the m position.

3 Connect the car adapter 9 to the mains plug 3.

4 Unreel the required length of cable from the cable reservoir 8 and

connect the car adapter to the cigarette lighter socket of the car.

(12V DC).

Notes:

Never use the Baby Bottle Warmer when the car is in motion.

Never use the Baby Bottle Warmer without water in it.

Only use the Baby Bottle Warmer when the ambient temperature is

between +7 cC and +37 cC.

Caution: Change the water in the bottle warmer often for hygienic

reasons.

Operation

Warming of baby bottles

1 Turn the click-step control knob 4 to the m position.

2 Placethebottleinthecontainer7andllthespacebetweenthe

bottle and the inner container with water up to two centimeters

fromtherim6.Forsmallerbottleslluptojustabovethemilkline

in the bottle.

3 Set the required temperature using the click-step control knob.

The indicator lamp lights to indicate the heating operation.

-

ENGLISH 7

After approximately 8 minutes the milk will have reached just the right

temperature for your baby. The indicator lamp goes out. The indicator

lamp then switches on and off intermittently to indicate the thermostat is

controlling the temperature of the water.

4 Remove the bottle from the container and turn the control knob

to the m position.

5 Shake the bottle a little to distribute the heat evenly before you

allow your baby to drink.

Notes:

Always check that the contents of the bottle are at the correct

temperature by pouring a few drops on the back of your hand.

The heating of baby food depends not only on the temperature

setting but also on the initial temperature of the food and water, the

wall thickness of the glass and the amount and consistency of the

food. The symbol “BOTTLE” is an indication for rapid warming up.

After a short while you will nd the best setting to obtain the ideal

temperature for your baby’s food. Our information is based on

warming 200ml milk from 20 cC up to 37 cC.

Warming of baby food jars

1 Removethelabelandlidfromthejar.

2 Turn the click-step control knob 4 to the m position.

3 Placethejarinthecontainer7usingthelifterandllthespace

betweenthejarandtheinnercontainerwithwateruptotwo

centimetresfromtherim6.Forsmalljarsll-uptojustbelowthe

topofthejar.

4 Settheclick-stepcontrolknobtothe“jar”symbol.

The indicator lamp lights to indicate that the thermostat is working.

5 Usetheliftertostirthecontentsofthejarfrequentlyformore

rapid distribution of heat.

After approximately 12-15 minutes (depending on the consistency of

food) the food will have reached just the right temperature for your baby.

The indicator lamp goes out.

-

ENGLISH8

6 Removethejarfromthecontainerandturnthecontrolknobto

the m position.

Note: Always check that the contents of the jar are at the correct

temperature, by testing some on the back of your hand.

Keeping warm

With the Baby Bottle Warmer you can also keep the bottles and jars

warm for a short time. To do this set the control knob to position v. The

thermostat ensures that the set temperature is maintained. For

microbiological and hygienic reasons baby food should never be kept

warm for longer than one hour.

Operation in the car

Follow the same instructions as mentioned above.

Note: For quickly warming up baby food in bottles and jars, adjust the

click-step control knob to the “jar” symbol. Because the car battery is now

being used instead of the mains supply, the time required for warming up

may be slightly longer.

Warning: Prolonged use of the Baby Bottle Warmer (several hours) can

weaken your car battery.

Maintenance

Cleaning

Disconnect the Baby Bottle Warmer from the mains (or the cigarette

lighter socket) and allow it to cool down. Clean the container and the

outside of the Baby Bottle Warmer with a damp cloth.

Notes:

Never immerse the Baby Bottle Warmer in water.

Do not use cleaning or scouring agents.

The type plate is located at the bottom of the product.

Warning: If a fault occurs, consult your dealer or Philips’ service centre.

Under no circumstances should you try to repair the unit yourself, as this

would invalidate the warranty.

-

ENGLISH 9

Guarantee & service

Guarantee & service If you need information or if you have a problem,

please visit the Philips website at www.philips.com or contact the Philips

Customer Care Centre in your country (you will nd its phone number

in the worldwide guarantee leaet). If there is no Customer Care Centre

in your country, turn to your local Philips dealer or contact the Service

Department of Philips Domestic Appliances and Personal Care BV.



Model SCF205 Model SCF215

Power supply

(mains)

230V AC 230V AC

Power consumption

(mains)

100 Watts 90 Watts

Power supply (car

battery)

- 12V DC

Power consumption

(car battery)

- Power consumption

(car battery)

Operational

ambient

temperature

between +7 cC

and +37 cC

between +7 cC and +37 cC

ENGLISH10

Trouble shooting

Comments Solutions

Overow of water You have put too much

water into the inner

container

Temperature too low Continue heating for a few

seconds after the indicator

light has switched off, or

increase the adjustment

setting

Temperature too high Lower the adjustment setting

The jar has not heated correctly Stir the contents from time

to time while heating. Check

that the click-step control

knob is in the “jar” position

The indicator light switches on and off

while keeping warm

This is normal; it may turn on

or off while heating

ENGLISH 11

Page is loading ...

www.philips.com

u

4222.002.6372.2

Philips SCF215 User manual

This manual is also suitable for

Philips SCF215 User manual

in other languages

Related papers

Other documents