PowerPro IB74 Series

Black & Decker PowerPro IB74 Series User manual

  • Hello! I am an AI chatbot trained to assist you with the Black & Decker PowerPro IB74 Series User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Blender
Model IB10-12, IB53 - IB74 Series
English, see page 2
Save this use and care book
Licuadora
Model IB10-12, IB53 - IB74 Series
Español, consulte la página 5
Lease este instructivo antes de usar el producto
Mélangeur
Modèles des séries IB10, IB12, IB53 et IB74
Français, à la page 8
Conserver ce guide d’entretien et d’utilisation.
IB10-12, 53-74
*
PowerPro
2
IB10-12, 53-74
English
Please read all instructions.
To protect against risk of electrical shock,
do not put blender base, cord, or plug in
water or other liquid.
Close supervision is necessary when any
appliance is used by or near children.
Turn off and unplug from outlet when
not in use, before putting on or taking off
parts, and before cleaning.
Do not operate any appliance with a dam-
aged cord or plug, or after the appliance
malfunctions, or is dropped or damaged in
any manner. Return the appliance to an
authorized service facility for examination,
repair, or electrical or mechanical adjust-
ment.
Do not use outdoors.
The use of attachments including can-
ning jars, not recommended or sold by
the appliance manufacturer may cause a
risk of fire, electric shock, or injury to
persons.
Never carry the unit by the cord or yank
cord from an outlet.
Do not let the plug or cord hang over the
edge of table or counter, or touch hot sur-
faces including the stove. Unit should be
placed away from sinks and hot surfaces.
Remove the jar and blade assembly from
the blender before washing.
Unit should be used for food preparation
only.
Always operate blender with cover in place.
Keep hands and utensils out of container
while blending to reduce the risk of
severe injury to persons or damage to the
blender. A scraper may be used, but only
when the blender is not running.
Blades are sharp. Handle carefully.
Avoid contacting moving parts.
To reduce the risk of injury, never place
cutter assembly blades on base without
the jar properly attached.
When blending hot liquids, remove the lid
cap. Keep hands and face away from the
lid cap opening while motor is running.
Do not leave blender unattended during use.
This appliance is intended FOR
HOUSEHOLD USE ONLY and not
for commercial or industrial use.
IMPORTANT
SAFEGUARDS
SAVE THESE INSTRUCTIONS
When using electrical appliances, in
order to reduce the risk of fire, electric
shock, and/or injury to persons, basic
safety precautions should always be fol-
lowed, including the following:
1 1/4
1
3/4
1/2
1 1/2
1 1/4
1
3/4
1/2
1 1/2
1/4
1/4
1. Unit Base
2. Jar Base
3. Blade Assembly
4. Gasket
5. Jar
6. Lid
7. Cap
5
4
3
2
1
6
7
Cover
Blender Jar Assembly
1. Before first use, wash all parts except the
base. Put the gasket on top of the Blade
Assembly.
2. Place the Blade Assembly into the Jar
Base and turn the Jar Base clockwise until
tight.
Figure A
3. Place the Jar firmly onto the Unit Base.
Figure B
How to Use
1. Be sure the unit is “off” and plug the cord
into a standard electrical outlet.
2. Place the food to be blended into the Jar.
3. Put the Lid on the Jar before beginning. Be sure
that the Lid Cap is in place. When crushing ice
or hard foods, keep one hand on the Lid.
4. Select the desired speed setting:
• In general, use lower positions for gentle
blending, chopping, and grinding; in 6 speed
(IB73/IB74 Series), 10-speed (IB10 Series),
or 12-speed (IB12 Series) models use mid-
range positions for mixing, beating, and
creaming. In all models use higher settings
for heavy-duty blending such as liquefying
or pureeing fruits. In 6, 10, or 12-speed
models, press the Low/High button then,
press the appropriate speed level for blend-
ing at higher settings. Figure C
• For quick blending tasks, press the Pulse
button for a few seconds, then release. Use
Pulse for best results when crushing ice.
The Electrical Cord
The cord length of this appliance was select-
ed to reduce safety hazards that may occur with
a longer cord. If more cord length is needed, an
extension cord may be used. It should be rated
not less than 10 amperes, 120 volts or 6
amperes, 220 volts. When using a longer cord,
be sure that it does not drape over a working
area or dangle where it could be pulled on or
ripped over.
Polarized Plug
(North American/Central American Models Only)
This appliance has a polarized plug—one
blade is wider than the other. To reduce
the risk of electric shock, this plug will fit
into a polarized outlet only one way. If
the plug does not fit fully into the outlet,
reverse it. If it still does not fit, contact a
qualified electrician. Do not attempt to
defeat this safety feature by modifying the
plug in any way.
Tamper-Resistent Screw
This appliance is equipped with tamper-
resistant screws to prevent removal of the
outer cover. To reduce the risk of fire or elec-
tric shock, do not attempt to remove the
outer cover. There are no user serviceable
parts inside. Repair should be done only by
authorized service personnel.
1 1/4
1
3/4
1/2
1 1/2
1 1/4
1
3/4
1/2
1 1/2
1/4
1/4
Figure A
1 1/4
1
3/4
1/2
1 1/2
1 1/4
1
3/4
1/2
1 1/2
1/4
1/4
Figure B
3
6
1
7
8
9
10
2
3
4
5
LOW
HIGH
OFF / PULSE
ICE CRUSHING
7
1
8
9
10
11
12
2
3
4
5
6
LOW
HIGH
OFF / PULSE
ICE CRUSHING
25
4
HIGH
LOW
36
1
OFF / PULSE
ICE CRUSHING
25
4
36
1
1
1
2
OFF
PULSE
ICE CRUSHING
1
2
Figure C
IB53/IB54 IB73/IB74 IB10 IB12
Cover
5. If you want to add ingredients while the
Blender is on, remove the Lid Cap and place
through the Lid opening.
6. When finished blending, push the
Off/Pulse button.
7. To remove the Jar, lift it straight up from
the Unit Base without twisting. Remove
the Lid before
pouring.
8. If using very close
to an outlet, you
may shorten the
cord by winding
some length
around the tabs at
the bottom of the
Base. Figure D
Blender Tips
• Cut food into small 2'' pieces (about 5 cm.)
before adding to the Blender. To chop and
grate, cut solid foods into 1'' (2 cm.) pieces.
• When blending liquids, including the addi-
tion of ice cubes, limit quantity to the 4 cup
(1 lt.) mark of the Jar.
The following items should never be placed in
the unit as they may cause damage: dried spices
and herbs (ground alone), bones, large pieces
of solidly frozen foods, hard or tough foods.
For fast and easy ice crushing, add 1 cup of liq-
uid to the Jar, add up to 4 large ice cubes.
Cover holding one hand firmly on the Lid; use
the Pulse button to chop. If more ice is need-
ed, add cubes one by one through the hole in
the Lid and increase to the highest speed.
How to Clean
Your Blender
1. Before cleaning, turn off and unplug the
Blender.
2. Rinse parts immediately after blending to
ease cleanup.
3. Wipe the Base with a damp cloth and dry
thoroughly. Remove stubborn spots by rub-
bing with a damp cloth and a non-abrasive
cleaner. Do not immerse the Base in liquid.
4. Wash the Jar and the Lid with soap and water.
Only jars on the IB10G, IB12G, IB53G,
IB54G, and IB73G are dishwasher-safe.
5. Removable parts can be washed by hand
or in a dishwasher. The Lid, Lid Cap, and
Blade Assembly should be placed in the
top rack only. Do not place jars or parts in
boiling liquids.
6. If liquids spill into the Base, wipe the Base
clean with a damp cloth and dry thoroughly.
7. Do not use rough scouring pads or
cleansers on parts or finish.
Need Help?
Sevice or Repair
Service, if necessary, must be performed by
a Black & Decker Inc. Company-Owned or
Authorized Household Appliance Service
Center. The Service Center nearest you can
be found in the yellow pages of your phone
book under "Appliances - Small - Repairing"
or on the enclosed insert.
If mailing or shipping your Blender, pack it
carefully in a sturdy carton with enough
packing material to prevent damage. The
original carton is not suitable for mailing.
Include a note describing the problem to our
Service Center and be sure to give your
return address. We also suggest that you
insure the package for your protection.
Full One-Year Warranty
Household Products warrants this product
against any defects that are due to faulty
material or workmanship for a one-year
period after the original date of consumer
purchase or receipt as a gift. This warranty
does not include damage to the product
resulting from accident or misuse. If the
product should become defective within the
warranty period, we will repair it or elect to
replace it free of charge. We will return your
product, transportation charges prepaid,
provided it is delivered prepaid to any Black
& Decker Company-Owned or Authorized
Household Appliance Service Center.
This warranty gives you specific legal
rights and you may also have other rights
which vary from state to state or province to
province. Answers to any questions regard-
ing warranty or service locations may be
obtained by calling Consumer Assistance and
Information toll free: 1-800-231-9786.
4
Figure D
Cover
*
Listed by Underwriters Laboratories, Inc.
NOM Approved
Copyright © 1997-1999 Household Products, Inc.
Pub. No. 173966-00-RV02
Product made in Mexico
Printed in Mexico
Enlistado por Underwriters Laboratories, Inc.
Aprobado por NOM
Producto hecho en México por:
Household Products Limited de México
S. de R.L. de C.V. Acceso III No. 26 Fracc.
Industrial B. Juárez C.P. 76120, Querétaro, QRO.
Teléfono: (42) 11-7800
Impreso en México
Certifié par lorganisme américain Underwriters Laboratories, Inc.
Approuvé par lorganisme NOM
Fabriqué au Mexique
Imprimé en Mexique
Household Products Limited de México S. de R.L. de C.V.
400W 120V~ 60Hz (IB54/IB74 series)
350W 120V~ 50/60Hz
350W 220V~ 50/60Hz
12
Cover
/