Blackstar Artisan 15 Owner's manual

Category
Musical Instrument Amplifier
Type
Owner's manual

This manual is also suitable for

1
Owner’s Manual
Blackstar Amplification Ltd, Beckett House, 14 Billing Road, Northampton, NN1 5AW, UK
For the latest information go to: www.blackstaramps.com
Whilst the information contained herein is correct at the time of publication, due to our policy of constant improvement
and development, Blackstar Amplification Ltd reserves the right to alter specifications without prior notice.
HAND-CRAFTED TONE
Designed and Engineered by
Blackstar Amplification UK
HBK-1006 09/11
3
USA / Canada
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
8. Install in accordance with the manufacturer’s instructions.
9. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including ampliers) that produce heat.
10. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not t into your
outlet, consult an electrician for replacement of the obsolete outlet.
11. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
12. Only use attachments/accessories specied by the manufacturer.
13. Unplug this apparatus during lightning storms or when unused for long periods
of time.
14. Refer all servicing to qualied service personnel. Servicing is required when the
apparatus has been damaged in any way, such as the power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
“TO COMPLETELY DISCONNECT THIS APPARATUS FROM THE AC MAINS,
DISCONNECT THE POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE”.
“WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPARATUS TO RAIN OR MOISTURE AND OBJECTS FILLED WITH
LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS”.
This symbol is intended to alert the user to the presence of important operation
and maintenance (servicing) instructions in the literature accompanying the
appliance.
This symbol is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of sufcient
magnitude to constitute a risk of electric shock to persons.
54
Warning!
Important safety information!
READ THE FOLLOWING INFORMATION CAREFULLY. SAVE ALL
INSTRUCTIONS FOR FUTURE REFERENCE!
Follow all warnings and instructions marked on the product!
Danger! High internal operating voltages
Do not open the equipment case. There are no user serviceable parts in this
equipment. Refer all servicing to qualied service personnel.
Clean only with a dry cloth.
Condensation can form on the inside of an amplier if it is moved from a cold
environment to a warmer location. Before switching the unit on, it is recommended
that the unit be allowed to reach room temperature.
Unauthorised modication of this equipment is expressly forbidden by Blackstar
Amplication Ltd.
Never push objects of any kind into ventilation slots on the equipment casing.
Do not expose this apparatus to rain, liquids or moisture of any type.
Follow all warnings and instructions marked on the product!
Do not place this product on an unstable trolley, stand or table. The product may
fall, causing serious damage to the product or to persons!
Do not cover or block ventilation slots or openings.
This product should not be placed near a source of heat such as a stove, radiator,
or another heat producing amplier.
Use only the supplied power cord which is compatible with the mains voltage
supply in your area.
Power supply cords should always be handled carefully and should be replaced if
damaged in any way.
Never break off the earth (ground) pin on the power supply cord.
The power supply cord should be unplugged when the unit is to be unused for long
periods of time.
Before the unit is switched on, the loudspeaker should be connected as described
in the handbook using the lead recommended by the manufacturer.
Always replace damaged fuses with the correct rating and type.
Never disconnect the protective mains earth connection.
High loudspeaker levels can cause permanent hearing damage. You should
therefore avoid the direct vicinity of loudspeakers operating at high levels. Wear
hearing protection if continuously exposed to high levels.
If the product does not operate normally, when the operating instructions are
followed, then refer the product to a qualied service engineer.
The U.S. Government´s Occupational Safety and Health Administration (OSHA) has
specied the following permissible noise level exposures:
Duration Per Day In Hours Sound Level dBA, Slow Response
8 90
6 92
4 95
3 97
2 100
102
1 105
½ 110
¼ or less 115
According to OSHA, any exposure in excess of the above permissible limits could
result in some hearing loss.
Ear plug protectors in the ear canals or over the ears must be worn when operating
this amplication system in order to prevent a permanent hearing loss if exposure
is in excess of the limits as set forth above. To ensure against potentially dangerous
exposure to high sound pressure levels, it is recommended that all persons
exposed to equipment capable of producing high sound pressure levels such as
this amplication system be protected by hearing protectors while this unit is in
operation.
English
English
All electrical and electronic products should be disposed of separately
from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.
76
Introduction
Thank you for purchasing this Blackstar Artisan 15 handwired combo.
The Artisan 15 is the result of countless hours of painstaking Research and
Development by our world class design team. Based in Northampton (UK), the
Blackstar team are all experienced musicians themselves and the sole aim of the
development process is to provide guitarists with products which are the ultimate
tools for self expression.
Realising the skills and expertise of over thirty years of valve guitar amplier design
experience, the Artisan 15 represents a new level in handwired design, tone and
build quality.
All Blackstar products are subject to extensive laboratory and road testing to ensure
they are truly uncompromising in terms of reliability, quality and above all TONE!
If you like what you hear and want to nd out more about the Blackstar range of
products please visit our website at www.blackstaramps.com.
Thanks!
The Blackstar Team
Features
The Artisan 15 draws on the inuence of the two most revered low wattage guitar
combos in guitar amplier history. In keeping with its classic design, this amplier
is deceptively simple in operation and yet highly exible in functionality and tone.
The Artisan Series of handwired ampliers represents the absolute highest standard
of craftsmanship and boutique tone. With the emphasis on simplicity and sonic
purity, every feature has been rened to provide the artist with the widest range of
reference vintage tones. This is achieved by the design of electronic circuitry that
works in harmony with the nest components and materials available.
The Artisan 15 is built to last a lifetime and effortlessly combines vintage style and
rugged, road tested reliability. The point-to-point tag board construction, welded
steel chassis and nger-jointed birch-ply cabinet are complemented by beautiful
vintage red Tolex and etched aluminium panels.
Technical Information
Power Amplier
The Artisan 15 power amplier uses two EL84 power pentode valves in Class A and
operates in two modes, namely pentode (15W) or triode (5W), depending on the
setting of the Power Amplier Mode control.
In pentode mode the power amplier has a dynamic response which is rich in
bell like harmonics and has a beautiful ringing top end. The triode mode allows
the generation of the critical power amplier harmonic distortion at a much lower
volume but is darker and more mellow sounding with a rounder top end. In either
mode the Artisan 15 is an exceptional home or studio amplier.
The power amplier is further enhanced by using a cathode coupled phase splitter to
provide outstanding balance in the power amplier drive and hence superb dynamic
response. Further to this the EL84s used are graded in terms of quiescent operating
point and transconductance giving excellent hum performance and dynamic feel.
In keeping with the vintage sonic signature of the Artisan 15, the use of an EZ81
valve rectier adds compression to the power amplier response and is critical in
generating its feel and responsiveness.
With an amplier that is built to last, reliability of the electronics circuitry is essential
and therefore all the other power amplier and power supply components are also
over-specied for the best possible reliability.
Preamplier
Channel 1 – The ECC83 Channel
Hi/Lo inputs provide perfect matching either directly to the guitar (high sensitivity) or
for connection to higher output effects pedals (low sensitivity).
This channel has an exquisite British vintage feel. Its gain is derived from an
ECC83 dual triode valve and Channel 1’s sonic signature relies on the ECC83’s
characteristics in terms of gain, compression and distortion.
The Tone control is passive and its response deliberately relies on the setting of the
Channel 1 Volume control to allow the most versatile sonic palette.
Channel 2 – The EF86 Channel
Hi/Lo inputs provide perfect matching either directly to the guitar (high sensitivity) or
for connection to higher output effects pedals (low sensitivity).
This channel is based on the EF86 preamplier pentode valve. Originally, this valve
was most commonly used in high-end audio applications due to its high gain, low
noise characteristics. However, in very early American guitar amplier designs a
pentode was used in the preamplier circuit. The use of a pentode in these early
designs provided unique gain and compression characteristics which make these
ampliers so revered for studio use today.
In keeping with the reference American designs, the extra gain of the EF86 of the
Artisan 15 allows the power amplier to be driven harder for more compression and
English
English
98
rich harmonic distortion. The EF86 also adds its own particular compression and
distortion avour to this channel making Channel 2 a dream to record with.
Transformers
All Artisan transformers are traditionally made from the highest grade materials to
Blackstar’s demanding sonic and reliability specications.
Output Transformers
The design of the output transformers is critical to ensuring highly responsive feel
and a full natural frequency response.
All the Artisan output transformers are constructed using laminations made of
the highest grade, grain oriented steel. This minimises core losses and ensures
optimum delity and dynamics.
Mains Transformer
The Artisan mains transformers are also constructed using laminations made of the
highest grade, grain oriented steel. This minimises stray magnetic elds which can
be a source of unwanted noise and hum.
Channel Blending
The Artisan 15’s topology allows the blending of the two channels. By paralleling the
guitar connection to the inputs of Channel 1 and Channel 2 (see Figure 1 and Figure
2 below) endless tonal variations can be explored.
Figure 1 Figure 2
English
English
Front Panel
Channel 1
1. Hi Input
This is the high sensitivity input of Channel 1. This input has 6dB more (i.e. twice
as much) gain as the Lo Input. Use this input if you wish to achieve power amplier
break-up and overdrive. Always use a high quality screened guitar lead.
2. Lo Input
This is the low sensitivity input of Channel 1. This input has 6dB less (i.e. half as
much) gain as the Hi Input. Use this input if you wish the amplier to remain clean
(this is especially useful if the guitar used has high output pick-ups). Always use a
high quality screened guitar lead.
3. Volume
This controls the volume of Channel 1. The setting of this control deliberately
interacts with the Channel 1 Tone control’s response to maximise the sonic palette.
At low volume levels the amplier will produce exquisite, bell-like clean tones that are
denitively Class A in their character. As the volume is increased the tone becomes
fatter and more compressed as the power valves reach saturation. Further increases
in volume produce a wonderful tone as the power amplier valves move into full
distortion. This type of valve power amplier clipping produces the most natural
guitar distortion of all which reacts to every nuance of the guitarist’s playing style.
4. Tone
This passive control affects the tonal characteristics of Channel 1. Its response
deliberately relies on the setting of the Channel 1 Volume control to allow the most
versatile sonic palette. Fully counter-clockwise the tone is thick and dark, turning it
clockwise increases the amount of treble and the tone becomes more shimmering
and bright.
Channel 2
5. Hi Input
This is the high sensitivity input of Channel 2. This input has 6dB more (i.e. twice as
much) gain as the Lo Input. Always use a high quality screened guitar lead. Use this
input if you wish to achieve power amplier break-up and overdrive.
6. Lo Input
This is the low sensitivity input of Channel 2. This input has 6dB less (i.e. half as
much) gain as the Hi Input. Always use a high quality screened guitar lead. Use this
input if you wish the amplier to remain clean. This input is especially useful if the
guitar used has high output pick-ups.
7. Volume
This controls the volume of Channel 2. Turning it clockwise increases the volume.
As with Channel 1 natural warmth of power amplier distortion dominates the
Channel 2 character. However, as the EF86 provides higher gain and its own unique
compression characteristics, Channel 2 will provide higher levels of distortion. This
1110
English
English
channel will sing with sustain and give you all the drive you need for classic bluesy
lead tones. Remember that you can use the Lo Input of Channel 2 to experiment
with the clean side of the EF86’s tonal character.
8. Tone
This control affects the tonal characteristics of Channel 2. Fully counter-clockwise
the tone is thick and dark, turning it clockwise increases the amount of treble and
the tone becomes more dynamic and bright.
Master
9. Power Indicator Light
The power indicator will light when the amplier is switched on.
10. Power Amplier Mode Switch – 5 Watts / 15 Watts
This switch changes the power amplier from triode mode (5 Watts) to pentode
mode (15 Watts).
In triode mode the tone is round and bluesy with a mellow top end for laid back
soloing. The triode mode also has the benet of producing more saturated distortion
tones at lower output levels which makes this mode ideal for recording and practice.
The pentode mode produces a more dynamic feel and is louder and more punchy
than the triode mode. This setting is recommended for dynamic clean sounds and
more pushy sounding crunch tones. This is a great setting for rehearsals and small
club gigs.
See the Modes of Operation Table below for the different congurations possible.
Modes of Operation Table
Mode Preamplier PowerAmplierModeSetting Description
1 Channel 1 Triode ECC83 / 5W
2 Channel 2 Triode EF86 / 5W
3 Channel 1 Pentode ECC83 /15W
4 Channel 2 Pentode EF86 / 15W
5 Channel 1 / Channel 2 Triode Blended EF86 / ECC83 5W
6 Channel 1 / Channel 2 Pentode Blended EF86 / ECC83 15W
11. Standby
This switch applies the H.T. (High Tension) voltage required to produce sound.
Always turn this switch on at least 30 seconds after the Power switch (12) and off at
least 30 seconds before the Power switch. During short breaks in playing use just
this switch to turn ‘off’ and ‘on’ the amplier’s output.
12. Power
This switch is used to turn the amplier on and off. You should always turn this
switch on before turning on the Standby switch (11).
HI
LO
VOLUME TONE
STANDBY POWER
CHANNEL 1CHANNEL 2
HI
LO
VOLUME TONE
5 WATTS
15 WATTSONON
100100100100
1 2 10 119 123 4 5 6 7 8
1312
English
English
Rear Panel
1. Speaker Outputs
There are two parallel speaker outputs for connecting the internal speaker and/or
an external speaker cabinet. When connecting speakers always ensure that the
Impedance Selector (2) is set correctly.
2. Impedance Selector
This control matches the amplier’s impedance to that of the connected speakers.
Always ensure that the selected impedance matches that of the internal and/or
external speaker cabinets.
The Artisan 15’s internal speaker is 16 Ohms, so when used by itself the Impedance
Selector must be set to 16 Ohms. If an additional 16 Ohm speaker cabinet is used
together with the internal speaker the Impedance Selector should be set to 8 Ohms.
A speaker cabinet of less than 16 Ohms should not be used together with the
internal speaker.
WARNING: The amplier must always be completely powered down before
adjusting the setting of the Impedance Selector. Failure to do this, or to correctly
match the impedance of the amplier and speakers, will damage the amplier.
3. H.T. Fuse
The value of the H.T. Fuse is specied on the rear panel. Never use a fuse of the
incorrect value or attempt to bypass it.
4. Mains Fuse
The value of the Mains Fuse is specied on the rear panel. Never use a fuse of the
incorrect value or attempt to bypass it.
5. Mains Input
The supplied detachable mains lead is connected here. The lead should only
be connected to a power outlet that is compatible with the voltage, power and
frequency requirements stated on the rear panel. If in doubt get advice from a
qualied technician.
Technical Specication
Power (RMS): 15 Watts or 5 Watts (switchable)
Valves: 1 x EZ81, 2 x EL84, 2 x ECC83, 1 x EF86
Weight (kg): 23
Dimensions (mm): 617.5 x 544.5 x 234.5
12345
3534
¡AVISO!
Importante Información de seguridad
LEA LAS SIGUIENTE INFORMACIÓN DETENIDAMENTE Y CONSERVE
LAS INSTRUCCIONES PARA FUTURAS CONSULTAS.
SIGA TODOS LOS AVISOS E INSTRUCCIONES MARCACADAS EN LOS
PRODUCTOS.
PELIGRO! Alto voltaje interno.
NO ABRA LA TAPA DEL EQUIPO. NO HAY PARTES UTILIZABLES PARA OTROS
FINES EN ESTE EQUIPO. REMITA CUALQUIER ANOMALÍA AL SERVICIO
TÉCNICO CUALIFICADO.
UTILICE TRAPOS SECOS PARA LIMPIAR.
SE PUEDE FORMAR CONDENSACIÓN DENTRO DEL AMPLIFICADOR SI ESTE
SE HA MOVIDO DE UN LUGAR FRIO A OTRO MÁS CALIDO. EN EL CASO DE
QUE SE MOVIERA EL AMPLIFICADOR DE UN SITIO MÁS FRIO A OTRO MÁS
CALIDO O A LA INVERSA, DEJE UN RATO EL AMPLIFICADOR SIN ENCENDER
PARA QUE ESTE ALCANCE LA TEMPERATURA MEDIA DEL NUEVO LUGAR.
LAS MODIFICACIONES NO AUTORIZADAS ESTÁN EXPRESAMENTE PROHIBIDAS
POR BLACKSTAR AMPLIFICATIO LTD.
NUNCA APOYE OBJETOS EN NINGUNO DE LOS AGUJEROS DE VENTILACIÓN
LOCALIZADOS EN LAS TAPAS DEL EQUIPO.
NO EXPONGA LOS EQUIPOS A LA LLUVIA, LIQUIDOS O HUMEDAD DE
CUALQUIER TIPO.
SIGA TODOS LOS AVISOS E INSTRUCCIONES MARCADAS EN EL PRODUCTO.
NO PONGA LOS EQUIPOS EN CARRETILLAS INESTABLES O MESAS
NORMALES. EL EQUIPO PUEDE CAER CAUSANDOSE SERIOS DAÑOS ASÍ
COMO A PERSONAS.
NO CUBRA O BLOQUEE LOS AGUJEROS DE APERTURA Y VENTILACIÓN.
ESTE PRODUCTO NO DEBE SER PUESTO CERCA DE UNA FUENTE DE CALOR
COMO PUEDE SER UN RADIADOR, ESTUFA O CUALQUIER PRODUCTOR O
AMPLIFICADOR DE CALOR.
USE SOLO LA FUENTE DE ALIMENTACIÓN QUE SEA COMPATIBLE CON LOS
VOLTAJES UTILIZADOS EN EL ARE EN DONDE ESTÉ.
LA FUENTE DE ALIMENTACIÓN DEBE DE SER MANEJADA CON CUIDADO Y
DEBE DE SER REMPLAZADA EN CASO DE CUALQUIER DAÑO.
NUNCA ROMPA LA TOMA DE TIERRA SOBRE EL CABLE DE CORRIENTE.
EL CABLE DE CORRIENTE DEBERÁ DE SER DESCONECTADO CUANDO LA
UNIDAD NO VAYA A SER USADA DURANTE UN TIEMPO.
ANTES DE ENCENDER UN CABEZAL, LA PANTALLA DEBERA ESTAR CONECTADA
COMO SE DESCRIBE EN EL LIBRO DE INSTRUCCIONES UTILIZANDO LOS
CONDUCTORES RECOMENDADOS POR EL FABRICANTE.
REEMPLAZE SIEMPRE LOS FUSIBLES DAÑADOS POR OTROS DE
CARACTERISTICAS IDENTICAS.
NUNCA DESCONECTE EL PROTECTOR DE LA TOMA DE TIERRA.
LA POTENCIA DE SONIDO DE LOS ALTAVOCES CUANDO LOS NIVELES SON
ALTOS PUEDEN CAUSAR UN DAÑO PERMANENTE. USTED DEBERÁ POR
TANTO EVITAR LA EXPOSICIÓN DIRECTA A LOS ALTAVOCES CUANDO ESTOS
ESTÉN OPERANDO A UN NIVEL ALTO. PONGASE PROTECTORES DE OIDOS SI
DEBE DE ESTAR CONTINUAMENTE EXPUESTO.
SI EL PRODUCTO NO FUNCIONARA UNA VEZ SEGUIDAS TODAS LAS
INSTRUCCIONES, REMÍTALO AUN SERVICIO TÉCNICO CUALIFICADO.
LA OFICINA AMERICANA DE PROTECCIÓN DE LA SALUD HA ESPECIFICADO
LOS SIGUIENTES NIVELES ADMISIBLES DE EXPOSICIÓN DE RUIDO.
DURACIÓNPORDIAYHORAS NIVELDESONIDODBABAJARESPUESTA
8 90
6 92
4 95
3 97
2 100
102
1 105
½ 110
¼ ó menos 115
CUALQUIER EXPOSICIÓN POR ENCIMA DE LOS LIMITES MENCIONADOS
PUEDEN PROVOCAR PERDIDAS AUDITIVAS.
LOS TAPONES PROTECTORES DEBEN DE SER UTILIZADOS CUANDO SE OPERE
ESTE SISTEMA DE AMPLIFICACIÓN PARA PREVENIR DE UNA PERMANENTE
PERDIDA DE OIDO SI LA EXPOSICIÓN ES EXCESIVA O ESTÁ POR ENCIMA DE
LOS LIMITES DESCRITOS ARRIBA. PARA PREVENIR CONTRA UNA EXPOSICIÓN
PELIGROSA A ALTOS NIVELES DE SONIDO SE RECOMIENDA A TODAS LAS
PERSONAS QUE PUEDAN ESTAR EXPUESTAS A NIVELES PRODUCIDOS POR
UN SISTEMA DE AMPLIFICACIÓN COMO ESTE QUE PROTEJAN SUS OIDOS
MIENTRAS LA UNIDAD ESTÁ EN FUNCIONAMIENTO.
Español
Español
Todos los aparatos eléctricos o electrónicos se deben desechar de
forma distinta del servicio municipal de recogida de basura, a través
de puntos de recogida designados por el gobierno o las autoridades
locales.
5554
Japanese
Japanese
Español
Español
Français
Français
Deutsch
Deutsch
English
English
1
Owner’s Manual
Blackstar Amplification Ltd, Beckett House, 14 Billing Road, Northampton, NN1 5AW, UK
For the latest information go to: www.blackstaramps.com
Whilst the information contained herein is correct at the time of publication, due to our policy of constant improvement
and development, Blackstar Amplification Ltd reserves the right to alter specifications without prior notice.
HAND-CRAFTED TONE
Designed and Engineered by
Blackstar Amplification UK
HBK-1006 09/11
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29

Blackstar Artisan 15 Owner's manual

Category
Musical Instrument Amplifier
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI