BLACK DECKER BDBB214 T1 Owner's manual

Page is loading ...

3

ENGLISH

Intended use

Your Black & Decker mini light bar has been designed for

providing illumination for DIY projects and leisure use.

This product is intended for consumer use only.

Safety instructions

Warning! When using battery-powered appliances, basic

safety precautions, including the following, should always be

followed to reduce the risk of fire, leaking batteries, personal

injury and material damage.

X Read all of this manual carefully before using the

appliance.

X The intended use is described in this manual. The use

of any accessory or attachment or the performance

of any operation with this appliance other than those

recommended in this instruction manual may present

a risk of personal injury.

X Retain this manual for future reference.

Using your appliance

Always take care when using the appliance.

X Do not immerse the appliance in water.

X Do not open body casing. There are no user-

serviceable parts inside.

X Do not operate the appliance in explosive atmospheres,

such as in the presence of flammable liquids, gases

or dust.

X To reduce the risk of damage to plugs and cords never

pull the cable to remove the plug from a socket.

Safety of others

X This appliance is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision

or instruction concerning use of the appliance by

a person responsible for the their safety.

X Children should be supervised to ensure that they do

not play with the appliance.

After use

X When not in use, the appliance should be stored in a

dry, well ventilated place out of the reach of children.

X Children should not have access to stored appliances.

X When the appliance is stored or transported in a vehicle

it should be placed in the boot or restrained to prevent

movement following sudden changes in speed or

direction.

X The appliance should be protected from direct sunlight,

heat and moisture.

Inspection and repairs

X Before use, check the appliance for damaged or

defective parts. Check for breakage of parts, damage

to switches and any other conditions that may affect its

operation.

X Do not use the appliance if any part is damaged

or defective.

X Have any damaged or defective parts repaired

or replaced by an authorised repair agent.

X Never attempt to remove or replace any parts other than

those specified in this manual.

Specific safety instructions for light bars

X Inspect the lens for damage following impact or if the

light bar is dropped. Do not operate without the lens

in place or with a damaged lens.

X Never look directly into the light or shine the light into

another person's eyes.

X Do not immerse light bar in water.

Additional safety instructions for non-rechargeable

batteries

Warning! Batteries can explode, or leak, and can cause

injury or fire. To reduce this risk:

X Make sure that the on/off switch is in the off position

before inserting the battery(s). Inserting batteries into

power tools and appliances that have the switch on

invites accidents.

X Under abusive conditions, liquid may be ejected

from the battery, avoid contact. If contact accidentally

occurs, flush with water. If liquid contacts eyes,

additionally seek medical help. Liquid ejected

from the battery may cause irritation or burns.

X Carefully follow all instructions and warnings on the

battery label and package.

X Always insert batteries correctly with regard to polarity

(+ and -), marked on the battery and the equipment.

X Do not short battery terminals.

X Do not charge batteries.

X Do not mix old and new batteries. Replace all of them

at the same time with new batteries of the same brand

and type.

X Keep batteries out of the reach of children.

X Remove batteries if the device will not be used for

several months.

X Never attempt to open for any reason.

X Do not store in locations where the temperature may

exceed 40°C.

X When disposing of batteries, follow the instructions

given in the section "Protecting the environment".

X Do not incinerate the batteries.

X Do not expose the batteries to water.

4

ENGLISH

Features

1. Flexible hook

2. LED light bar

3. On/off button

4. Battery compartment cover

Assembly

Installing the batteries (fig. A)

Warning! Use AA size (LR06) alkaline batteries only.

X Turn the light bar upside down to get access to the

battery compartment cover (4).

X Unscrew the battery compartment cover (4) counter-

clockwise and remove it.

X Insert three new AA (LR06) alkaline batteries (5), make

sure to match the (+) positive and the (-) negative

terminals correctly.

X Locate the cover (4) into the base of the light bar. It will

only fit one way, do not force it.

X To secure the cover (4) to the battery compartment,

screw it clockwise to lock it into position.

Use

Operating the mini light bar

X To turn the light bar on, press the on/off button (3).

X To turn the light bar off, press the on/off button (3) again.

Using the flexible hook (fig. B and C)

The flexible hook (1) may be used to store, support or

suspend the light bar. The flexible hook allows the light bar

(2) to be set to in any position (fig. B). Make sure that the

flexible hook is secure around the supporting object.

Maintenance

X Your Black & Decker corded/cordless appliance/tool

has been designed to operate over a long period of

time with a minimum of maintenance. Continuous

satisfactory operation depends upon proper appliance/

tool care and regular cleaning.

Warning! Before performing any maintenance on corded/

cordless appliances/tools.

X Switch off and unplug the appliance/tool.

X Or switch off and remove the battery from the appliance/

tool if the appliance/tool has a separate battery pack

X Or run the battery down completely if it is integral and

then switch off.

X Unplug the charger before cleaning it. Your charger

does not require any maintenance apart from regular

cleaning.

X Regularly clean the ventilation slots in your appliance/

tool/charger using a soft brush or dry cloth.

X Regularly clean the housing using a damp cloth. Do not

use any abrasive or solvent-based cleaner.

Warning! Regularly open the chuck and tap it to remove any

dust from the interior (if applicable).

Protecting the environment

Should you find one day that your Black & Decker product

needs replacement, or if it is of no further use to you, do not

dispose of it with household waste. Make this product

available for separate collection.

Separate collection of used products and packaging

allows materials to be recycled and used again.

Re-use of recycled materials helps prevent

environmental pollution and reduces the demand

for raw materials.

Local regulations may provide for separate collection of

electrical products from the household, at municipal waste

sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and

recycling of Black & Decker products once they have

reached the end of their working life. To take advantage of

this service please return your product to any authorised

repair agent who will collect them on our behalf.

You can check the location of your nearest authorised repair

agent by contacting your local Black & Decker office at the

address indicated in this manual. Alternatively, a list of

authorised Black & Decker repair agents and full details

of our after-sales service and contacts are available on the

Internet at: www.2helpU.com.

Batteries

X Do not short-circuit the battery terminals.

X Do not dispose of the battery(s) in fire, as this may result

in a risk of personal injury or an explosion.

X Run the battery down completely, then remove it from

the appliance/tool.

X Batteries are recyclable. Place the battery in suitable

packaging to ensure that the terminals cannot be short-

circuited.

X Take them to any authorised repair agent or a local

recycling station.

Separate collection. This product must not be

disposed of with normal household waste.

At the end of their useful life, discard batteries with

due care for our environment:

5

ENGLISH

Technical data

EC declaration of conformity

BDBB214 H1

Black & Decker declares that these products conform to:

Standards & Legislation.

EN60598

The undersigned is responsible for compilation of the

technical file and makes this declaration on behalf of

Black & Decker

Kevin Hewitt

Director of Consumer Engineering

Spennymoor, County Durham, DL16 6JG

United Kingdom

29-05-2009

Guarantee

Black & Decker is confident of the quality of its products and

offers an outstanding guarantee. This guarantee statement

is in addition to and in no way prejudices your statutory

rights. The guarantee is valid within the territories of the

Member States of the European Union and the European

Free Trade Area.

If a Black & Decker product becomes defective due to faulty

materials, workmanship or lack of conformity, within

24 months from the date of purchase, Black & Decker

guarantees to replace defective parts, repair products

subjected to fair wear and tear or replace such products to

make sure of the minimum inconvenience to the customer

unless:

X The product has been used for trade, professional or

hire purposes.

X The product has been subjected to misuse or neglect.

X The product has sustained damage through foreign

objects, substances or accidents.

X Repairs have been attempted by persons other

than authorised repair agents or Black & Decker

service staff.

To claim on the guarantee, you will need to submit proof of

purchase to the seller or an authorised repair agent. You can

check the location of your nearest authorised repair agent by

contacting your local Black & Decker office at the address

indicated in this manual. Alternatively, a list of authorised

Black & Decker repair agents and full details of our after-

sales service and contacts are available on the Internet at:

www.2helpU.com.

Please visit our website www.blackanddecker.co.uk to

register your new Black & Decker product and to be kept

up to date on new products and special offers. Further

information on the Black & Decker brand and our range

of products is available at www.blackanddecker.co.uk.

BDBB214

Input voltage Vdc 4.5

Battery size type 3 x LR06 (AA)

Weight kg 0.36

Page is loading ...

BLACK DECKER BDBB214 T1 Owner's manual

This manual is also suitable for

BLACK DECKER BDBB214 T1 Owner's manual

in other languages

Related papers

Other documents