Privileg GKN 2777 A2+ Owner's manual

Brand: Privileg

Model: GKN 2777 A2+

Category: Fridge-freezers

Type: Owner's manual

Instructions for use

ENGLISH Instructions for use Page 4

INSTRUCTIONS FOR USE

BEFORE USING THE APPLIANCE 5

SAFEGUARDING THE ENVIRONMENT 5

PRECAUTIONS AND

GENERAL RECOMMENDATIONS 6

HOW TO INCREASE FREEZER

STORAGE CAPACITY 7

FUNCTIONS 7

STORE FOOD IN THE APPLIANCE 10

TWIST ICE MAKER* 11

RECOMANDATION IN CASE

OF NO USE OF THE APPLIANCE 12

ENERGYSAVING TIPS 12

MAINTENANCE AND CLEANING 13

LED LIGHT SYSTEM 13

TROUBLESHOOTING GUIDE 14

AFTERSALES SERVICE 16

ELECTRICAL CONNECTION

FOR GREAT BRITAIN AND IRELAND ONLY 16

• This appliance is intended to be used in

household and similar applications such as

- staff kitchen areas in shops, offices and other

working environments;

- farm houses and by clients in hotels, motels and

other residential type environments;

- bed and breakfast type environments;

To ensure best use of your appliance, carefully

read the operating instructions which contain a

description of the product and useful advice.

Keep these instructions for future reference.

1. After unpacking the appliance, make sure it is not

damaged and that the door closes properly. Any

damage must be reported to the dealer within 24

hours of delivery of the appliance.

2. Wait at least two hours before switching the

appliance on, to ensure that the refrigerant circuit

is fully efficient.

3. Installation and the electrical connection must be

carried out by a qualified technician according to

the manufacturer’s instructions and in compliance

with the local safety regulations.

4. Clean the inside of the appliance before using it.

BEFORE USING THE APPLIANCE

1. Packing

The packing material is 100% recyclable and bears

the recycling symbol. For disposal, comply with the

local regulations. Keep the packing materials (plastic

bags, polystyrene parts, etc.) out of the reach of

children, as they are a potential source of danger.

2. Scrapping/Disposal

The appliance is manufactured using recyclable

material.

This appliance is marked in compliance with

European Directive 2002/96/EC on Waste Electrical

and Electronic Equipment (WEEE). By ensuring the

correct disposal of this appliance, you can help

prevent potentially negative consequences for the

environment and the health of persons.

The symbol

on the appliance, or on the

accompanying documents, indicates that this

appliance should not be treated as domestic waste

but must be taken to a special collection centre for

the recycling of electrical and electronic equipment.

When scrapping the appliance, make it unusable by

cutting off the power cable and removing the doors

and shelves so that children cannot easily climb

inside and become trapped.

Scrap the appliance in compliance with local

regulations on waste disposal, taking it to a special

collection centre; do not leave the appliance

unattended even for a few days, since it is a potential

source of danger for children.

For further information on the treatment,

recovery and recycling of this product, contact

your competent local office, the household waste

collection service or the shop where you purchased

the appliance.

Information:

This appliance does not contain CFCs. The refrigerant

circuit contains R134a (HFC) or R600a (HC) (see the

rating plate inside the appliance).

Appliances with Isobutane (R600a): isobutane is a

natural gas without environmental impact, but is

flammable. Therefore, make sure the refrigerant

circuit pipes are not damaged.

This product may contain Fluorinated Greenhouse

Gases covered by the Kyoto Protocol; the refrigerant

gas is inside a hermetically sealed system.

Refrigerant gas: R134a has a Global Warming

Potential of (GWP) 1300.

Declaration of conformity

• This appliance has been designed for preserving

food and is manufactured in compliance with

Regulation (CE) No. 1935/2004.

• This appliance has been designed, manufactured

and marketed in compliance with:

- safety objectives of the “Low Voltage” Directive

2006/95/CE (which replaces 73/23/CEE and

subsequent amendments);

- the protection requirements of Directive “EMC”

2004/108/EC.

Electrical safety of the appliance can only be

guaranteed if it is correctly connected to an approved

earthing system.

SAFEGUARDING THE ENVIRONMENT

INSTALLATION

• The appliance must be handled and installed by

two or more persons.

• Be careful not to damage the floors (e.g. parquet)

when moving the appliance.

• During installation, make sure the appliance does

not damage the power cable.

• Make sure the appliance is not near a heat source.

• To guarantee adequate ventilation, leave a space

on both sides and above the appliance. The

distance between the rear of the appliance and

the wall behind the appliance should be 50mm.

A reduction of this space will increase the Energy

consumption of product.

• Keep the appliance ventilation openings free.

• Do not damage the appliance refrigerant circuit

pipes.

• Install and level the appliance on a floor strong

enough to take its weight and in a place suitable

for its size and use.

• Install the appliance in a dry and well-ventilated

place. The appliance is arranged for operation in

places where the temperature comes within the

following ranges, according to the climatic class

given on the rating plate. The appliance may

not work properly if it is left for a long time at a

temperature outside the specified range.

•

Climatic Class Amb. T. (°C) Amb. T. (°F)

SN From 10 to 32 From 50 to 90

N From 16 to 32 From 61 to 90

ST From 16 to 38 From 61 to 100

T From 16 to 43 From 61 to 110

• Make sure the voltage specified on the rating

plate corresponds to that of your home.

• Do not use single/multi adapters or extension

cords.

• For the water connection, use the pipe supplied

with the new appliance; do not reuse that of the

previous appliance.

• Power cable modification or replacement must

only be carried out by qualified personnel or by

After-sales Service.

• It must be possible to disconnect the appliance

from the power supply by unplugging it or by

means of a mains two-pole switch installed

upstream of the socket.

SAFETY

• Do not store explosive substances such as

aerosol cans with a flammable propellant in this

appliance.

• Do not store or use petrol, flammable liquids

or gas in the vicinity of this or other electrical

appliances. The fumes can cause fires or

explosions.

• Do not use mechanical, electric or chemical

means other than those recommended by the

Manufacturer to speed up the defrost process.

• Do not use or place electrical devices inside the

appliance compartments if they are not of the

type expressly authorised by the Manufacturer.

• This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or lack

of experience and knowledge, unless they have

been given supervision or instruction concerning

use of the appliance by a person responsible for

their safety.

• To avoid the risk of children becoming trapped

and suffocating, do not allow them to play or hide

inside the appliance.

• Do not swallow the contents (non-toxic) of the ice

packs (in some models).

• Do not eat ice cubes or ice lollies immediately

after taking them out of the freezer since they

may cause cold burns.

USE

• Before carrying out any maintenance or cleaning

operation, unplug the appliance or disconnect it

from the power supply.

• All appliances equipped with an automatic ice-

maker and water dispenser must be connected to

a water supply that only delivers drinking water

(with mains water pressure of between 0.17 and

0.81 Mpa (1.7 and 8.1 bar)). Automatic ice-makers

and/or water dispensers not directly connected

to the water supply must be filled with drinking

water only.

• Use the refrigerator compartment only for storing

fresh food and the freezer compartment only

for storing frozen food, freezing fresh food and

making ice cubes.

• Do not store glass containers with liquids in the

freezer compartment since they may break.

• Avoid storing unwrapped food in direct contact

with internal surfaces of the refrigerator or freezer

compartments.

The Manufacturer declines any liability if the

above advice and precautions are not respected.

PRECAUTIONS AND

GENERAL RECOMMENDATIONS

Notes:

• Do not block the air outlet area (on the back wall)

with food products.

• If the freezer is provided with a flap, it is possible

to maximize the storage volume by removing the

flap (by bending it).

• All shelves, flaps and pull-out baskets are

removable.

• The internal temperatures of the appliance

may be affected by the ambient temperature,

frequency of door opening, as well as location of

the appliance. Temperature setting should take

into consideration these factors.

• Unless otherwise specified the appliance

accessories are not dishwasher safe.

• The bigger distance at the backside of appliance

to the wall, the higher is energy-saving.

You can increase storage capacity in the freezer

compartment by:

• removing the baskets / flaps (by bending it) to

allow the storage of big products.

• placing the food products directly on the freezer

shelves.

• removing the Twist Ice Maker (separately) or

together with the docking station.

HOW TO INCREASE FREEZER

STORAGE CAPACITY

SMART DISPLAY

This function can be used to save energy. Please

follow the instructions contained in the Quick Start

Guide to activate/deactivate the function.

Two seconds after activation of the Smart Display,

the display goes off. To adjust the temperature or use

other functions, it is necessary to activate the display

by pressing any button. After about 15 seconds

without performing any action, the display goes off

again.

When function is deactivated the normal display is

restored. The Smart Display is automatically disabled

after a power failure. Remember that this function

does not disconnect the appliance from the power

supply, but only reduce the energy consumed by

external display.

Note:

This function is available only on the model with User

Interface on the door.

The declared appliance energy consumption refers to

operation with the Smart Display function activated.

6th SENSE

GREEN INTELLIGENCE

The 6th Sense/ Green Intelligence function works

to maintain the right temperature in the following

cases:

- Door opened for a while

The function activates when door opening causes

the internal temperature to increase to values that

do not ensure safe storage of food and remains

active until optimal storage conditions have been

restored.

- Fresh food stored in the freezer

The function activates when fresh food is placed

in the freezer and remains active until optimal

freezing conditions are reached so as to ensure

the best freezing quality with the lowest power

consumption.

NOTE:

Besides the quantity of food loaded into the freezer,

ambient temperature and the quantity of food

already inside the freezer affect the duration of the

6th Sense/ Green Intelligence function. Therefore

significant duration variations are quite normal.

ON/STAND BY

This function turns On/Stand-by the freezer

compartments. To put the product in Stand-by, press

& hold the On/Stand-by button for 3 seconds.

When the appliance is in Stand-by, the light inside the

refrigerator compartment does not work. Remember

that this operation does not disconnect the appliance

from the power supply. To switch the appliance On

again, simply press and hold for 3 seconds the On/

Stand-By button .

FUNCTIONS

BLACK OUT ALARM

After a power blackout, your product is designed to

automatically monitor the temperature in the freezer

when electricity is resupplied. If the temperature in

the freezer rises above freezing level, the Black Out

indicator

turns on, the Alarm indicator

blinks

and the acoustical alarm sounds when electricity is

resupplied. To reset the alarm press the Stop Alarm

button

just once.

In case of Black Out Alarm, the following actions are

recommended:

• If the food in the freezer is unfrozen but still cold,

all the food in the freezer should be eaten within

the next 24 hours.

• If the food in the freezer is frozen, this indicates

the food was thawed and then refrozen when

electricity was re-supplied which degrades taste,

quality and nutritional value and also could

be unsafe. It is recommended to not consume

the food but to dispose of the entire content

of the freezer. The Black Out Alarm is designed

to provide guidance on food quality in the

freezer in the event of electricity black out. This

system does not guarantee food quality or safety

and consumers are advised to use their own

judgment in evaluating food quality in freezer

compartment.

TEMPERATURE ALARM

The acoustic alarm sounds and temperature indicator

(°C) blinks. The alarm is activated when:

• The appliance is connected to the power supply

after prolonged disuse.

• The freezer compartment temperature is too high.

• The quantity of foods loaded into the freezer

exceeds that indicated on the rating plate.

• The freezer door has been left open for a long

time.

To mute the alarm buzzer press Stop Alarm button

just once. The Alarm indicator

is automatically

turned-off as soon as the freezer compartment

reaches a temperature below -10°C and the

temperature set indicator (°C) stop blinking and

shows the chosen setting.

NOTE: The temperature alarm may even be activated

following prolonged opening of the door or after

fresh food products have been placed in the freezing

zone; the temporary increase in temperature signaled

does not affect the perfect preservation of already

frozen food.

DOOR OPEN ALARM

The

Alarm icon lights up blinking and the

acoustic alarm sounds. The alarm is activated when

the door is left open for more than 2 minutes. To

disengage the door alarm close the door, or press

once Stop Alarm button to mute the acoustic

alarm.

KEY LOCK

This function prevents anyone from inadvertently

changing settings or switching off the appliance.

To lock the keys, press Stop Alarm button for

3 seconds until the display shows the Key Lock

indicator and an acoustic signal confirms the

function has been selected. After 3s. indicator

goes off. When activated, pressing the other buttons

(except Stop Alarm button) activates an audible

signal and on display flashes the Key Lock indicator

. Any alarm can be deactivated when Key Lock

function is active.

To unlock the keys, follow the same procedure until

the display shows the Key Lock indicator and

an acoustic signal confirms the function has been

disengaged. After 1s. indicator goes off.

SHOCK FREEZE

The “Shock Freeze” compartment is specifically

designed to freeze up to 2 kg of fresh food

extremely quickly. The ultra-fast “Shock Freeze”

function minimizes the formation of ice crystals

inside the food as it freezes, thus ensuring it is of

the best possible quality when defrosted prior to

consumption. When the “Shock Freeze” function is

not active, the compartment can be used as normal

for traditional freezing or for the storage of already

frozen foods.

NOTE: When the Shock Freeze function is active

you may hear a humming sound. This is absolutely

normal and is caused by airflow that permits

optimum cold distribution inside compartment.

Activating and deactivating the “Shock Freeze”

function:

1. Make sure at least 12 hours have passed since

the last time the “Shock Freeze” function was

activated (if at all). Do not activate the function

more frequently than once every 12 hours.

2. Make sure that the “Fast Freeze” function is not

active: “Shock Freeze” and “Fast Freeze” functions

cannot be active together at the same time.

3. Empty the “Shock Freeze” compartment.

4. Activate the “Shock Freeze” function by briefly

touching the button

on the control panel: the

icon lights up and the fans on the bottom of the

compartment come on, increasing the flow of

cold air and accelerating the freezing process as a

result.

5. Place the food to be frozen inside the

compartment, a few centimeters (min. 2 cm) away

from the fans on the bottom of the compartment,

so that cold air can circulate.

6. To achieve maximum freezing speed, we

recommend not to deactivate the “Shock Freeze”

function until it is automatic deactivation,

keeping closed the door.

7. The “Shock Freeze” function is automatically

deactivated 4-5 hours after its activation: the

indicator

switches off and the fans are

deactivated.

The “Shock Freeze” function may nevertheless

be switched off at any time as desired, by briefly

pressing the button

on the control panel:

the indicator

switches off and the fans are

deactivated.

Attention:

• Incompatibility with the “Fast Freeze” function

To guarantee optimal performance, the “Shock

Freeze” and “Fast Freeze” functions cannot be used at

the same time. Therefore, if the “Fast Freeze” function

has been already engaged, it has to be disengaged

first to activate the “Shock Freeze” function (and vice-

versa).

• If the fans in the Shock Freeze compartment do

not start working

After the “Shock Freeze” function has been

activated, it may happen that the indicator

lights up as expected, but the fans do not start

working. This is normal and means that freezer

defrosting is in progress. At the end of the

defrosting phase (maximum duration: 1.5 hours),

the fans will automatically start working and the

“Shock Freeze” process will begin as normal.

• If the indicator

does not light up.

If, after the button is pressed, the icon

lights up: in this case the button has been

pressed for too long. To activate the “Shock

Freeze” function, briefly touch the button ,

without keeping it pressed for more than 1 second.

FAST FREEZE

The amount of fresh food (in kg) that can be

frozen in 24 hours is indicated on the appliance

rating plate.

For optimum appliance performance, press for 3

seconds the Shock Freeze/Fast Freeze

button

(until the Fast Freeze indicator

lights up) 24 hours

before placing fresh food in the freezer (according to

QUICK START GUIDE).

After placing fresh food in the freezer, 24 hours on

Fast Freeze function is generally sufficient; After

50 hours the Fast Freeze function automatically

deactivates.

Attention: In order to save energy, when freezing

small amounts of food, the fast freeze function can

be deactivated after a few hours.

• Incompatibility with the “Shock Freeze”

function

To guarantee optimal performance, the “Shock

Freeze” and “Fast Freeze” functions cannot be used

at the same time. Therefore, if the “Fast Freeze”

function has been already engaged, it has to be

disengaged first to activate the “Shock Freeze”

function (and vice-versa).

ECO NIGHT FUNCTION (NIGHT TIME RATE)

The Eco Night function enables appliance energy

consumption to be concentrated in the reduced rate

hours (generally at night), when electricity is readily

available and costs less than during the daytime

(only in countries that utilise a time based multi-rate

system - check energy rates with the local electricity

company). To activate the function, press the button

at the reduced rate start time (depending on the

specific rates plan). For example, if the reduced rate

starts at 8 p.m., press the button

at that time.

When the Eco Night indicator

is ON, the function

is ON. Once the function is activated, the appliance

automatically adapts energy consumption according

to the time selected, i.e. consuming less energy

during the day than at night.

IMPORTANT: To operate properly, the function must

be on during the night and day. The function remains

on until deactivated (or it is deactivated in case of a

power failure or appliance switch-off). To deactivate

the function, press the button

again. When the

Eco Night indicator is OFF, the function is OFF.

Note: The declared appliance energy consumption

refers to operation with the Eco Night function

deactivated.

AUTOMATIC DEFROST

This product is designed to defrost automatically

according to conditions of use and ambient humidity.

TIPS FOR FREEZING AND STORING FRESH FOOD

• Before freezing, wrap and seal fresh food in:

aluminium foil, cling film, air and water-tight

plastic bags, polythene containers with lids or

freezer containers suitable for freezing fresh food.

• Food must be fresh, mature and of prime quality

in order to obtain high quality frozen food.

• Fresh vegetables and fruit should preferably be

frozen as soon as they are picked to maintain the

full original nutritional value, consistency, colour

and flavour.

Some meat, especially game, should be hung before

it is frozen.

NOTE:

• Always leave hot food to cool before placing in

the freezer.

• Eat fully or partially defrosted foods immediately.

Do not refreeze unless the food is cooked after it

has thawed. Once cooked, the thawed food can

be refrozen.

Do not re-freeze defrosted food.

Using Ice Packs

Ice packs helps in keeping frozen the foodstuffs

in case of power failure. For the best usage of

them, place them above food stored in the top of

compartment

Classification of frozen foods

Put the frozen products into the freezer and classify

them. The storage date should be indicated on the

packs, to allow use within expiry dates preservation.

Advice for storing frozen food

When purchasing frozen food products:

• Ensure that the packaging is not damaged

(frozen food in damaged packaging may have

deteriorated). If the package is swollen or has

damp patches, it may not have been stored under

optimal conditions and defrosting may have

already begun.

• When shopping, leave frozen food purchases until

last and transport the products in a thermally

insulated cool bag.

• Once at home, place the frozen foods

immediately in the freezer.

• If food has defrosted even partially, do not re-

freeze it. Consume within 24 hours.

• Avoid, or reduce temperature variations to the

minimum. Respect the best-before date on the

package.

• Always observe the storage information on the

package.

Important:

The table alongside shows the recommended

maximum storage time for frozen fresh foods.

Declared performance refers to appliance

operation without ice packs, with the exception of

the rising time.

MONTHS FOOD

STORE FOOD IN THE APPLIANCE

HOW TO MAKE ICE CUBES

You can remove the complete Twist Ice Maker (press

and hold (1) the leveler on the left and push it (2)

towards you) or you can just remove the ice cube tray

by pulling it (3) towards you.

Fill the tray with potable water (maximum level = 2/3

of the overall capacity).

Place again the Twist Ice Maker in its seat, or reinsert

the ice cube tray within the Twist Ice Maker. Take care

not to spill water.

Wait until the ice cubes are formed (it is

recommended to wait for about 4 hours, with the

Fast Freeze option active).

NOTE: Twist Ice Maker is removable. It can be placed

in horizontal position anywhere in the freezer

compartment or taken out of the appliance when ice-

making is not required.

HOW TO TAKE ICE CUBES

1. Make sure that the storage bin is in place under

the ice tray. If not, slide into place.

2. Twist one of levers firmly in the clockwise

direction until the tray twists slightly. The ice

cubes fall into the storage bin.

3. Repeat Step 2 for the other half of the tray, if

necessary. You can make ice cubes (see the

chapter “HOW TO MAKE ICE CUBES”) and store

them in the storage bin and pull it towards you.

4. To get ice, slightly lift up the storage bin and pull

it towards you.

NOTE: if you prefer, you can remove the entire Twist

Ice Maker from the appliance, to take the ice cubes

wherever is convenient for you (for example: directly

on the table).

TWIST ICE MAKER*

* available on selected models only.

Short vacation

There is no need to disconnect the appliance from

the power supply if you will be away for less than

three weeks. Use up perishable food, freeze other

food.

Long vacation

Remove all the food if you are going away for three

weeks or more.

1. Empty the ice bucket.

Fix some wooden or plastic wedges to the upper

part of both doors with adhesive tape and leave the

doors open enough for air to circulate inside both

compartments. This will prevent odour and mould

from setting in.

Moving

1. Take out all internal parts.

2. Wrap them well, and fix them together with

adhesive tape so that they do not bang together

or get lost.

3. Screw the adjustable feet so that they do not

touch the support surface.

4. Close and fix both doors with adhesive tape and,

again using adhesive tape, fix the power cable to

the appliance.

Power failure

In the event of a power failure, call the local office of

your electricity supply company and ask how long it

is going to last.

Note: Bear in mind that a full appliance will stay cold

longer than a partially filled one.

If ice crystals are still visible on the food, it may be

frozen again, although flavour and aroma may be

affected.

If food is found to be in a poor condition, it is best to

throw it away.

For power failures lasting up to 24 hours.

1. Keep both doors of the appliance closed. This

will allow the stored food to stay cold as long as

possible.

For power failures lasting more than 24 hours.

1. Empty the freezer compartment and arrange the

food in a portable freezer. If this type of freezer is

not available and, likewise, no artificial ice packs

are available, try to use up the food, which is more

easily perishable.

2. Empty the ice bucket.

RECOMANDATION IN CASE

OF NO USE OF THE APPLIANCE

• Install the appliance in a dry, well ventilated room far away from any heat source (e.g. radiator, cooker,

etc.) and in a place not exposed directly to the sun. If required, use an insulating plate.

• To guarantee adequate ventilation, leave a space on both sides and above the appliance. The distance

between the rear of the appliance and the wall behind the appliance should be 50mm. A reduction of

this space will increase the Energy consumption of product.

• Insufficient ventilation on back of the product increases energy consumption and decreases cooling

efficiency.

• The internal temperatures of the appliance may be affected by the ambient temperature, frequency of

door opening, as well as location of the appliance. Temperature setting should take into consideration

these factors.

• Allow warm food and drinks to cool down before placing in the appliance.

• Do not obstruct the fan with food items.

• After placing the food check if the door of compartments closes properly, especially the freezer door.

• Reduce to a minimum door opening.

• When thawing frozen food, place them in the refrigerator. The low temperature of the frozen products

cools the food in the refrigerator.

• For appliances with special compartments (Fresh Food Compartment, Zero Degrees Box, …) they can

be removed when not in use.

• Positioning of the shelves in the refrigerator has no impact on the efficient usage of energy. Food should

be placed on the shelves in such way to ensure proper air circulation (food should not touch each other

and distance between food and rear wall should be kept).

• You can increase the storage capacity of frozen food by removing the flap and / or basket (according to

the Product Sheet), maintaining the same energy consumption.

• The condenser (the coil placed in the rear of the appliance) should be cleaned regularly.

• Damaged or leaky gasket must be replaced as soon as possible.

ENERGYSAVING TIPS

Before any cleaning or maintenance operation,

unplug the appliance from the mains or disconnect

the electrical power supply.

Periodically clean the appliance with a cloth and a

solution of lukewarm water and neutral detergent

specifically for refrigerator interiors. Never use

detergents or abrasives. Never clean refrigerator

parts with flammable fluids. The fumes can create

a fire hazard or explosion. Clean the outside of the

appliance and the door seal with a damp cloth and

dry with a soft cloth.

Do not use steam cleaners.

Clean the condenser (back the appliance) using a

vacuum cleaner, proceeding as follows: remove the

front plinth and proceed to clean the condenser.

Important:

• The buttons and control panel display must

not be cleaned with alcohol or alcohol-derived

substances, but with a dry cloth.

• The refrigeration system pipes are located near

the defrost pan and can become hot. Periodically

clean them with a vacuum cleaner.

• To remove or insert the glass shelf, move up the

front part of the shelf to pass the stopper.

MAINTENANCE AND CLEANING

The light system inside the freezer compartment uses

LEDs light, allowing a better lightning as well as very

low energy consumption. If the LED light system does

not work, please contact the Service to replace it.

LED LIGHT SYSTEM

Before contacting After-sales Service…

Performance problems often result from little things you can find and fix yourself without tools of any kind.

TROUBLESHOOTING GUIDE

Noises coming from your

appliances are normal since

it has a number of fans

and engines to regulate

performances that switch on

and off automatically.

Some of the functional noises

can be reduced through:

- Levelling the appliance

and installing it on an even

surface.

- Separating and avoiding

contact between the

appliance and furniture.

- Checking if the internal

components are correctly

placed.

- Checking if bottles and

containers are not in

contact with each other.

Some of the functional noises you might hear:

A hissing sound when switching on the appliance for the first time or

after a long pause.

A gurgling sound when refrigerant fluid enters into the pipes.

Buzzing sound when water valve or fan start working.

A cracking sound when compressor starts or when ready ice drops

into ice box abrupt clicks when compressor switches on and off.

The appliance is not working: • Is the power cable plugged into a live socket with the proper voltage?

• Have you checked the protection devices and fuses of the electrical

system in your home?

If there is water in the defrost

pan:

• This is normal in hot, damp weather. The pan can even be half full.

Make sure the appliance is level so that the water does not overflow.

If the edges of the appliance

cabinet, which come in

contact with the door seal,

are warm to the touch:

• This is normal in hot weather and when the compressor is running.

If the light does not work: • Have you checked the protection devices and fuses of the electrical

system in your home?

• Is the power cable plugged into a live socket with the proper voltage?

• Has the light bulb burnt out?

If the motor seems to run too

much:

• Is the condenser (back the appliance) free of dust and fluff?

• Are the door properly closed?

• Are the door seals properly fitted?

• On hot days or if the room is warm, the motor naturally runs longer.

• If the appliance door has been left open for a while or if large amounts

of food have been stored, the motor will run longer in order to cool

down the interior of the appliance.

• Motor running time depends on different things: number of door

openings, amount of food stored, temperature of the room, setting of

the temperature controls.

Operations Alarms

In the event of operation alarms, they will also be displayed in the digits LEDs, (e.g. Failure1, Failure 2, etc...)

call After-sales Service and specify the alarm code. The acoustic alarm sounds, the Alarm icon lights up and

the F letter on the digit display blinks according to failure code described below:

Failure code Visualization

Error 2

F letter blink on/off at 0,5 sec. Blinks ON 2 times

then remain off for 5 seconds. Pattern repeats.

Error 3

F letter blink on/off at 0,5 sec. Blinks ON 3 times

then remain off for 5 seconds. Pattern repeats.

Error 6

F letter blink on/off at 0,5 sec. Blinks ON 6 times

then remain off for 5 seconds. Pattern repeats.

If the appliance temperature

is too high:

• Are the appliance controls correctly set?

• Has a large amount of food been added to the appliance?

• Check that the door is not opened too often.

• Check that the door close properly.

• Make sure that air flow vents inside the compartment are not blocked,

as this prevents the circulation of cold air.

If there is moisture build-up: • Make sure that air flow vents inside the compartment are not blocked,

as this prevents the circulation of air.

• Make sure that the food is properly packaged. Dry any dampness on

food containers before placing them in the appliance.

• Check that the doors are not opened too often. When the door is

opened, humidity from the room air enters the appliance. The more

often the door is opened, the faster humidity builds up, especially

when the room itself is very humid.

• If the room is very humid, it is normal for moisture to build up inside

the refrigerator.

If the doors do not open and

close properly:

• Check that food packages are not blocking the door.

• Check that the internal parts or automatic ice maker are not out of

position.

• Check that the door seals are not dirty or sticky.

• Ensure the appliance is level.

Before contacting After-Sales Service:

Switch the appliance on again to see if the problem

has been solved. If it has not, disconnect the

appliance from the power supply and wait for about

an hour before switching on again.

If, after performing the checks described in the

Troubleshooting Guide and switching the appliance

on again, your appliance still does not work properly,

contact the After-sales Service, explain the problem.

Specify:

• the model and appliance serial number (stated on

the rating plate),

• the nature of the problem,

• the Service number (the number after the word

SERVICE on the data plate on the inside of the

appliance),

• your full address,

• your telephone number and area code.

Note:

The direction of door opening can be changed. If this

operation is performed by After-sales Service it is not

covered by the warranty.

AFTERSALES SERVICE

Warning - this appliance must be earthed

Fuse replacement

If the mains lead of this appliance is fitted with a BS 1363A 13amp

fused plug, to change a fuse in this type of plug use an A.S.T.A.

approved fuse to BS 1362 type and proceed as follows:

1. Remove the fuse cover (A) and fuse (B).

2. Fit replacement 13A fuse into fuse cover.

3. Refit both into plug.

Important:

The fuse cover must be refitted when changing a fuse and if

the fuse cover is lost the plug must not be used until a correct

replacement is fitted.

Correct replacement are identified by the colour insert or the colour embossed in words on the base of the

plug.

Replacement fuse covers are available from your local electrical store.

For the Republic of Ireland only

The information given in respect of Great Britain will frequently apply, but a third type of plug and socket is

also used, the 2-pin, side earth type.

Socket outlet / plug (valid for both countries)

If the fitted plug is not suitable for your socket outlet, please contact After-sales Service for further instruction.

Please do not attempt to change plug yourself. This procedure needs to be carried out by a qualified

technician in compliance with the manufactures instructions and current standard safety regulations.

ELECTRICAL CONNECTION

FOR GREAT BRITAIN AND IRELAND ONLY

5019 600 00175/B

06/16

DK FI PL CZ SK HU

BG RO

DE GB FR NL ES PT IT GR SE NO

Privileg GKN 2777 A2+ Owner's manual

Brand: Privileg

Model: GKN 2777 A2+

Category: Fridge-freezers

Type: Owner's manual

Download PDF

report

Privileg GKN 2777 A2+ Owner's manual

Privileg GKN 2777 A2+ Owner's manual

Related papers

Other documents