Sony CMT-SX7B Operating instructions

Type
Operating instructions

This manual is also suitable for

CMT-SX7/SX7B
Home Audio System
Refer to the Wi-Fi Startup Guide (separate document) for how to listen
to music stored in your PC or other device over your Wi-Fi network.
Operating Instructions
Getting started
About SongPal
Listening to a CD
Listening to the radio
Listening to a file on a USB
device
Listening to music of an
iPhone/iPad/iPod
Listening to music with
connected components
Listening to music through a
BLUETOOTH connection
Listening to music via a Wi-
Fi network
Additional information
Troubleshooting
Precautions/Specifications
2
GB
To reduce the risk of fire, do not cover the
ventilation opening of the appliance with
newspapers, tablecloths, curtains, etc.
Do not expose the appliance to naked flame
sources (for example, lighted candles).
To reduce the risk of fire or electric shock, do not
expose this appliance to dripping or splashing,
and do not place objects filled with liquids, such as
vases, on the appliance.
As the main plug is used to disconnect the unit
from the mains, connect the unit to an easily
accessible AC outlet. Should you notice an
abnormality in the unit, disconnect the main plug
from the AC outlet immediately.
Do not install the appliance in a confined space,
such as a bookcase or built-in cabinet.
Do not expose batteries or appliances with
battery-installed to excessive heat, such as
sunshine and fire.
The unit is not disconnected from the mains as
long as it is connected to the AC outlet, even if the
unit itself has been turned off.
Excessive sound pressure from earphones and
headphones can cause hearing loss.
Indoor use only.
Recommended cables
Properly shielded and grounded cables and
connectors must be used for connection to host
computers and/or peripherals.
CAUTION
The use of optical instruments with this product
will increase eye hazard.
This appliance is classified as a CLASS 1 LASER
product. This marking is located on the rear
exterior.
For customers in Australia and New Zealand
It should be installed and operated with at least 20
cm and more between the radiator and person's
body (excluding extremities: hands, wrists, feet
and ankles).
For customers in Europe
Notice for customers: the following
information is only applicable to
equipment sold in countries applying EU
directives.
This product has been manufactured by or on
behalf of Sony Corporation, 1-7-1 Konan Minato-ku
Tokyo, 108-0075 Japan. Inquiries related to product
compliance based on European Union legislation
shall be addressed to the authorized
representative, Sony Belgium, bijkantoor van Sony
Europe Limited, Da Vincilaan 7-D1, 1935 Zaventem,
Belgium. For any service or guarantee matters,
please refer to the addresses provided in the
separate service or guarantee documents.
This product is intended to be used in the
following countries:
AT, BE, BG, HR, CY, CZ, DK, EE, FI, FR, DE, GR, HU, IS,
IE, IT, LV, LI, LT, LU, MT, NL, NO, PL, PT, RO, SK, SI, ES,
SE, CH, GB, AL, BA, MK, MD, RS, ME, Kosovo
Hereby, Sony Corp., declares that this equipment is
in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
For details, please access the following URL:
http://www.compliance.sony.de/
5150 - 5350 MHz band is restricted to indoor
operations only.
This equipment has been tested and found to
comply with the limits set out in the EMC
regulation using a connection cable shorter than 3
meters.
Disposal of waste batteries
and electrical and electronic
equipment (applicable in the
European Union and other
European countries with
separate collection systems)
This symbol on the product, the battery or on the
packaging indicates that the product and the
battery shall not be treated as household waste.
On certain batteries this symbol might be used in
combination with a chemical symbol. The chemical
symbols for mercury (Hg) or lead (Pb) are added if
the battery contains more than 0.0005% mercury
or 0.004% lead. By ensuring these products and
batteries are disposed of correctly, you will help
prevent potentially negative consequences for the
environment and human health which could
otherwise be caused by inappropriate waste
handling. The recycling of the materials will help to
conserve natural resources.
In case of products that for safety, performance or
data integrity reasons require a permanent
connection with an incorporated battery, this
WARNING
3
GB
battery should be replaced by qualified service
staff only. To ensure that the battery and the
electrical and electronic equipment will be treated
properly, hand over these products at end-of-life
to the applicable collection point for the recycling
of electrical and electronic equipment. For all other
batteries, please view the section on how to
remove the battery from the product safely. Hand
the battery over to the applicable collection point
for the recycling of waste batteries. For more
detailed information about recycling of this
product or battery, please contact your local Civic
Office, your household waste disposal service or
the shop where you purchased the product or
battery.
The adaptor is not for the use in Chile.
Please use this adaptor in the countries where it is
necessary.
Before operating this
system
Music discs encoded with
copyright protection technologies
This product is designed to playback discs
that conform to the Compact Disc (CD)
standard. Recently, various music discs
encoded with copyright protection
technologies are marketed by some record
companies.
Please be aware that among those discs,
there are some that do not conform to the
CD standard and may not be playable by
this product.
Note on DualDiscs
A DualDisc is a two sided disc product which
mates DVD recorded material on one side
with digital audio material on the other side.
However, since the audio material side does
not conform to the Compact Disc (CD)
standard, playback on this product is not
guaranteed.
Malfunctions that occur during the
normal use of the system will be repaired
by Sony in accordance with the
conditions defined in the limited
warranty for this system. However, Sony
will not be liable for any consequences
arising from a failure to play caused by a
damaged or malfunctioning system.
4
GB
Documents provided
Operating Instructions
(this document)
Explains important safety
information, BLUETOOTH
connection method,
troubleshooting, etc.
Wi-Fi Startup Guide
(separate document)
Explains how to listen to
music stored in your
computer or other device
over your Wi-Fi network.
Help Guide (web
document for a PC/
smartphone)
Explains details about the
system; network
connection and playback
method with each OS/
device, wireless LAN
connection, etc.
http://rd1.sony.net/help/speaker/cmt-sx7/h_zz/
5
GB
Table of Contents
Before operating this system..................................................................3
Documents provided ............................................................................. 4
Getting started
Location and function of controls.......................................................... 8
Inserting the batteries ...........................................................................11
About SongPal
What you can do with SongPal............................................................. 12
Listening to a CD
Playing a CD-DA/MP3 disc.................................................................... 13
To change the play mode................................................................ 13
Creating your own program (Program Play) ......................................... 15
Listening to the radio
Tuning in a radio station .......................................................................16
Presetting radio stations....................................................................... 17
Running the DAB Automatic Scan manually (CMT-SX7B only) .............. 17
Listening to a file on a USB device
Playing a file on a USB device ...............................................................18
Connecting a USB device to the USB port on the front of the unit .........18
Connecting a USB device to the USB port on the rear of the unit ..........19
Playable audio formats...................................................................19
Listening to music of an iPhone/iPad/iPod
Playing via USB connection ................................................................. 20
Playing via wireless connection (AirPlay) ............................................ 20
6
GB
Listening to music with connected components
Playing back the music of connected components..............................21
Playing a component connected to the OPTICAL IN jack .....................21
Playing a component connected to the LINE IN jack ...........................21
Listening to music through a BLUETOOTH
connection
Pairing the system with a BLUETOOTH device and listening to
music ................................................................................................ 22
Listening to music through a registered device................................. 23
Listening to music by one-touch action (NFC) ..................................... 24
Playing with high quality sound codec (AAC/LDAC)............................ 25
Listening to music via a Wi-Fi network
Selecting the method of network connection..................................... 26
Connecting with a computer................................................................ 26
Listening to the same music from the multiple speakers
(SongPal Link function)..................................................................... 28
Listening to an Internet music service (Google Cast)........................... 28
Listening to an Internet music service (Spotify)................................... 29
Additional information
Setting the Automatic Standby function ............................................. 30
Setting the BLUETOOTH/Network Standby mode............................... 30
Setting the wireless signal ON/OFF ......................................................31
Adjusting the sound..............................................................................31
Setting the clock................................................................................... 32
Using the timers ................................................................................... 32
Setting the Sleep Timer.................................................................. 32
Setting the Play Timer.................................................................... 32
Updating the software ......................................................................... 34
Method 1: Automatic update via the Internet.................................... 34
Method 2: Manual update via the Internet ....................................... 35
Method 3: Manual update via a USB flash drive................................. 35
When the update via a network has failed........................................ 36
7
GB
Troubleshooting
Troubleshooting ...................................................................................37
Messages............................................................................................. 42
Precautions/Specifications
Precautions.......................................................................................... 44
Compatible devices and versions........................................................ 45
iPhone/iPad/iPod or iTunes ........................................................... 45
DLNA device ................................................................................. 46
USB device ................................................................................... 46
BLUETOOTH device ....................................................................... 46
BLUETOOTH wireless technology .........................................................47
Specifications....................................................................................... 48
8
GB
Location and function of controls
Note
This manual mainly explains operations using the remote, but the same operations can
also be performed using the buttons on the unit having the same or similar names.
Unit (front)
/ (power) button
Use to turn the power on or off.
Standby indicator
Lights in yellow-green when the power is
turned on. Turns off when the power is
turned off. The indicator flashes in red if
the system detects an abnormality
(page 37).
When the system in BLUETOOTH/
Network Standby mode, the indicator
lights up in orange.
 (play/pause) button
Use to start or pause playback.
Display window
N-Mark
Place a smartphone/tablet equipped
with the NFC function close to this mark
to perform BLUETOOTH registration,
connection or disconnection by a one-
touch action (page 24).
MENU button
Use to display the menu. Press / to
select the items in the menu.
BACK button
Use to go back to the previous display.
/ (previous/next) /TUNING –/+
dial
Use to cue to the beginning of a track
or file.
Use to tune in a desired radio station.
PUSH ENTER button
Use to operate as the ENTER button.
Remote sensor
VOLUME dial
Use to adjust the volume.
 (open/close) button
Use to open or close the disc tray.
Disc tray
Set a CD with the label side facing
upward.
Getting started
9
GB
Getting started
(USB FRONT) port
Connect a USB device (page 18).
 (headphones) jack
Use to connect headphones.
Remote
/ (power) button
Use to turn the power on or off.
//ENTER button
Press / to select an item, then press
ENTER to enter.
Use / to select a folder (album) on an
MP3 disc or USB device.
(volume) +/– button
Use to adjust the volume.
(muting) button
Use to turn off the sound temporarily. Press
the button again to restore the sound.
 (stop) button
Use to stop playback.
/ (previous/next, PRESET –/+)
buttons
Use to cue to the beginning of a track
or file.
Use to select a preset number of the
radio station tuned in.
/ (fast-rewind/fast-forward,
TUNING –/+) buttons
Use to fast-rewind or fast-forward a
track or file.
Use to tune-in a desired radio station.
 (play/pause) button
Use to start or pause playback.
CLEARAUDIO+ button
Set the sound to Sony’s recommended
settings.
BACK button
Use to return to the previous status.
MENU button
Use to display the menu. Press / to
select the items in the menu.
FUNCTION button
Press to change the functions. Each press
changes to the next function in the
following sequence:
CD USB FRONT USB REAR
BLUETOOTH DAB* TUNER FM
TUNER AM* OPTICAL IN LINE IN
NETWORK
* DAB is available for CMT-SX7B only, and
TUNER AM is for CMT-SX7 only.
DISPLAY button
Use to change the information displayed
in the display window when the power is
on. An underscore “_” is displayed in the
place of an unrecognizable character.
If you press this button when the power
is turned off, the clock is displayed.
However, if you press this button when
the BLUETOOTH/Network Standby mode
is on, the clock is not displayed.
10
GB
Unit (back)
SPEAKERS L/R (left/right) connectors
Connect each speaker as illustrated
below.
Note
Connect the speaker cords while the system is
turned off.
Wireless LAN antenna
If you use the wireless network function,
set the antenna as shown in the
illustration.
LINE IN (external input) jack
Connect to an output jack of the optional
external components with an audio
connecting cable (not supplied).
AM ANTENNA (CMT-SX7 only)
Connect the AM loop antenna.
FM ANTENNA (CMT-SX7 only)
Connect the FM antenna.
DAB/FM ANTENNA (CMT-SX7B only)
Connect the FM antenna.
We recommend to use the optional RF
cable for the DAB connection.
CMT-SX7
CMT-SX7B
– connector (black)
+ connector (red)
Right speaker
Left speaker
Speaker cords (supplied)
11
GB
Getting started
Note
Find a location and an orientation that provide
good reception, and then fix the antennas to a
stable surface (window, wall, etc.).
Keep the antennas away from the unit, power
cord and other AV components to avoid picking
noise.
Secure the end of the FM lead antenna with
adhesive tape.
To prepare the AM loop antenna
(CMT-SX7 only)
1
Fold the antenna stand as illustration.
2
Attach the projecting part of the frame to
the antenna stand.
OPTICAL IN (optical input) jack
Connect to an output jack of the optional
external components with an optical
cable (not supplied).
Note
The system is not compatible with a format
other than PCM. Set the output format of the
external component to PCM.
 (USB REAR) port
Connect a computer or Mac using a USB
cable (not supplied). If you connect a
WALKMAN® or Xperia which is
compatible with High-Resolution Audio,
use a USB cable and an optional cable for
WALKMAN® or Xperia* (not supplied)
(page 19).
You can also use this as a USB-DAC.
* Optional High-Resolution Audio USB Adaptor
WM-PORT Cable can be ordered from your
nearest Sony dealer. To connect Xperia, use a
commercially available cable.
LAN connector
Connect network equipment with a LAN
cable (not supplied) (page 26).
AC power cord
Inserting the
batteries
Insert two supplied R03 (size AAA) batteries,
side first, matching the polarities shown
below.
Note
With normal use, the batteries should last for
about 6 months.
Do not mix an old battery with a new one or mix
different types of batteries.
If you do not use the remote for a long period of
time, remove the batteries to avoid damage
from battery leakage and corrosion.
Side view
Fold both parts of the
stand.
Press until it clicks.
12
GB
What you can do with
SongPal
SongPal is an application for controlling
Sony audio devices which are compatible
with SongPal using your smartphone/
iPhone.
Search for SongPal on Google Play™ or the
App Store, and download it.
Downloading this application on your
smartphone/iPhone provides the following.
Music service*
You can configure the initial settings to use
music services. To enjoy music services, a
third party application is required.
Controlling devices on your home network
You can play music stored in your PC or
DLNA server over your network.
The following functions can be operated on
the system, but also by using SongPal.
Operating a CD: You can play a CD.
Controlling a device connected via USB:
You can play music in a device connected
to the (USB FRONT) port.
Operating the radio: You can receive the
radio station.
* Depending on the country and region, music
services and their period of availability may
differ. A separate registration is required for
certain services. An update of the device may be
required. The services provided by third parties
may change, stop or be terminated without
notice. Sony does not assume any responsibility
for such situations.
What you can control with SongPal varies
depending on the connected device.
The specification and design of the
application may change without notice.
Refer to SongPal Help for more details.
http://info.songpal.sony.net/help/
About SongPal
The overview of the devices on the home network is
displayed. You can select the audio device to play or
group the audio devices using SongPal Link (multi-
room function).
You can select sound sources for playback from the list
of the selectable sound sources. Also, you can make
various sound/network settings of audio device.
13
GB
Listening to a CD
Playing a CD-DA/MP3
disc
1
Press FUNCTION to select “CD.
2
Press (open/close) to open the
disc tray.
3
Set a disc on the disc tray with
the label side (printed side)
facing up.
4
Press (open/close) to close the
disc tray.
5
Press (play/pause).
Playback starts.
The button of the remote or the unit
enables you to fast-rewind/fast-
forward, select a track, file or folder (for
MP3 disc), etc.
Note
Press after “Reading” has disappeared from
the display window.
To eject the CD
Press (open/close) on the unit.
Tip
The system is turned on and the disc tray is
opened automatically by pressing (open/
close) while the system is turned off.
Note
Do not load a CD with non-standard shapes
(e.g., heart, square, star). Doing this may cause
irreparable damage to the system.
Do not use a CD with tape, stickers or paste on it
as this may cause malfunction.
When you remove a disc, do not touch the
surface of the disc.
Play mode enables you to playback the
same music repeatedly or shuffle-play.
1
Press to stop playback.
If you select “Repeat” in step 4, you do
not have to stop playback.
2
Press MENU.
3
Press / to select “CD Menu,
then press ENTER.
4
Press / to select “Playmode”
or “Repeat,” then press ENTER.
5
Press / to select the play
mode, then press ENTER.
Listening to a CD
Label side
(printed side)
(open/close)
To change the play mode
Play mode
14
GB
You can select the following play modes.
Playmode
* Only during MP3 disc playback. When playing
back a CD (CD-DA), this mode will operate in the
same way as normal playback or shuffle
playback.
Repeat
Note on playing MP3 discs
Do not save unnecessary folders or files
on a disc that has MP3 files.
The system can only play MP3 files that
have a file extension of “.mp3.
Even when file name has the “.mp3” file
extension, if it is not an audio MP3 file,
playing this file may generate a loud
noise, which could cause damage of the
system.
The maximum number of MP3 folders and
files compatible with this system is:
999* folders (including the root folder)
999 files
250 files in a single folder
8 folder levels (in the tree structure of
files)
* This includes folders that have no MP3 or
other files. The number of folders that the
system can recognize may be less than actual
number of folders, depending on the folder
structure.
Compatibility with all MP3 encoding/
writing software, CD-R/RW drive and
recording media cannot be guaranteed.
Incompatible MP3 discs may produce
noise or interrupted audio or may not play
at all.
Play mode Effect
Normal Plays a track or file.
Folder* Plays all tracks in the
selected folder. “FLDR”
lights up in the display
window.
Shuffle Plays all tracks or files in
random order. “SHUF”
lights up in the display
window.
Folder Shuffle* Plays all tracks or files in
the selected folder in
random order. “FLDR.
SHUF” lights up in the
display window.
Program Plays the programmed
tracks or files. “PGM” lights
up in the display window.
For details, see “Creating
your own program
(Program Play)” (page 15).
Play mode Effect
All (Repeat plays
all tracks)
The system plays all tracks
in a disc or folder
repeatedly. “ ” lights up
in the display window.
One (Repeat
plays one track)
The system plays the
selected track repeatedly.
1” lights up in the
display window.
Off Cancels repeat playback.
15
GB
Listening to a CD
Creating your own
program (Program
Play)
Plays the programmed track or file in a CD.
1
Select “Program” in step 5 of “To
change the play mode” (page 13),
then press ENTER.
2
When using an MP3 disc, press
/ to select the folder
containing the tracks or files that
you want to program.
If you want to play all tracks or files in
the folder, press ENTER.
3
Press / to select a
desired track or file, then select
ENTER.
Repeat the steps above to program
additional tracks or files.
4
Press .
Your program of tracks or files starts
playback.
To cancel program play
In step 1, select “Normal” for “Program,
then press ENTER.
To delete a programmed track,
file or folder
Press while the play is stopped. Each time
you press the button, the last programmed
track, file or folder will be deleted.
When all the programmed tracks, files or
folders are deleted, “No Step” appears.
Tip
Up to 25 tracks, files or folders can be
programmed. If you attempt to program more
than 25 tracks, files or folders,Step Full! will be
displayed. In this case, delete unnecessary
tracks.
To play the same program again, press .
Note
When the disc is ejected or the power cord is
disconnected after programming, all the
programmed tracks, files and folders are
deleted.
Selected track
or file number
Total playing time of the
selected track or file
16
GB
Tuning in a radio
station
1
Press FUNCTION to select “TUNER
FM” or “TUNER AM” (CMT-SX7), or
“DAB” or “TUNER FM” (CMT-
SX7B).
2
Press and hold / until the
frequency indication in the
display window starts changing,
then release the button.
Tuning stops automatically when a
radio station is tuned in (Automatic
Scanning), and “STEREO” (when a FM
stereo broadcast is received) appears in
the display.
Manual tuning
Press / repeatedly to tune-in the
desired station.
Note on DAB/DAB+ stations (CMT-SX7B only)
When you tune in a station that provides
RDS services, information such as the
service name or station name is provided
by broadcasts.
When tuning in a DAB/DAB+ station, it
may take a few seconds before you hear
any sound.
Primary service is automatically received
when secondary service ends.
This tuner does not support data services.
If reception of an FM stereo
broadcast is noisy
Select monaural reception by following
steps. This reduces noise.
1
Tune in the desired station, then
press MENU.
2
Press / to select “Tuner Menu,
then press ENTER.
3
Press / to select “FM Mode,
then press ENTER.
4
Press / to select “Mono,then
press ENTER.
To receive stereo broadcast, select
“Stereo” following step 4.
To change the AM tuning interval
(CMT-SX7 only)
The default setting for AM tuning interval is
9 kHz (or 10 kHz for some areas). Use the
buttons on the unit to perform this
operation.
1
Press FUNCTION on the unit repeatedly to
select “TUNER AM.”
2
Press / to turn off the system.
3
Press and hold MENU and press / on
the unit.
“Step 9k” or “Step 10k” appears in the display.
When you change the interval, all the AM
preset stations are erased.
Listening to the radio
17
GB
Listening to the radio
Presetting radio
stations
You can preset your desired radio stations.
1
Tune in the desired station, then
press MENU.
2
Press / to select “Tuner Menu,
then press ENTER.
To preset an AM station, select “AM
Preset Memory” and follow step 4
(CMT-SX7 only).
3
Press / to select “FM Preset
Memory” (for FM stations) or
“DAB Preset Memory” (for DAB
stations (CMT-SX7B only)), then
press ENTER.
4
Press / to select “Ok,” then
press ENTER.
5
Press / to select preset
number, then press ENTER.
“Complete!” appears in the display
window and the radio station is
registered with the preset number.
Repeat the steps above to register
further radio stations.
6
Press / to turn off the power,
then press / again to turn on
the power.
Tip
You can preset up to 20 FM and 10 AM stations
(CMT-SX7), or 20 DAB/DAB+ and 20 FM stations
(CMT-SX7B).
If you select an already-registered preset
number in step 5, the preset radio station is
replaced by the currently tuned-in radio station.
To tune in to a preset radio station
Press / to select the preset number
to which the desired station is registered.
Before you can tune in DAB/DAB+ stations,
you must perform a DAB Initial Scan.
When you have moved to another area, also
perform the DAB Initial Scan manually to
update the DAB/DAB+ service information.
1
Press MENU.
2
Press / to selectTuner Menu,”
then press ENTER.
3
Press / to select “Initial Scan,
then press ENTER.
4
Press / to select “Ok,” then
press ENTER.
Scanning begins. The scanning
progress is indicated by asterisks
(*******). Depending on the DAB/DAB+
services available in your area,
scanning may take a few minutes.
Note
If your country or region does not support DAB/
DAB+ broadcast, “No Service” appears.
This procedure clears all previously stored
presets.
Before unplugging the DAB/FM lead antenna,
make sure the system is turned off to preserve
your own DAB/DAB+ settings.
Preset number
Running the DAB
Automatic Scan manually
(CMT-SX7B only)
18
GB
Playing a file on a USB
device
You can play audio files stored on a USB
device such as WALKMAN® or digital media
player, on this system by connecting a USB
device to the system.
The (USB REAR) port on the rear of the unit
can be connected with a computer,
WALKMAN® or Xperia which is compatible
with High-Resolution Audio.
For details on compatible USB devices, see
“Compatible devices and versions
(page 45).
Note
If you play back High-Resolution Audio, use the
device which is compatible with USB2.0 High
Speed cable.
1
Press FUNCTION to select “USB
FRONT.
2
Connect a USB device to the
(USB FRONT) port on the front of
the unit.
When connecting the USB device,
connect it directly, or via the USB cable
supplied with the USB device.
Wait until “Reading” disappears and
“ROOT” appears.
3
Press .
Starts playback.
Operate with the button of the remote
or unit.
You can select a track, file or folder by
pressing ENTER, while “ROOT” is
appearing.
Tip
When playing the USB device, the play mode
can be selected. Press MENU, then select “USB
Menu.” Select “Playmode” or “Repeat.
For details, see “To change the play mode”
(page 13). When a file on a USB device is playing,
a track or file in the folder, shuffle-playback or
programmed playback cannot be played.
Charging begins automatically when you
connect the USB device to the (USB FRONT)
port of the unit.
If the USB device cannot be charged, disconnect
and reconnect it. For details on the charging
status of the USB device, see the operating
manual of the USB device.
Note
The playback order for the system may differ
from the playback order of the connected digital
music player.
Be sure to turn off the system before removing
the USB device. Removing the USB device while
the system is turned on may corrupt the data on
the USB device.
When USB cable connection is necessary,
connect the USB cable supplied with the USB
device to be connected. For details on
connection, refer to the operation manual
supplied with the USB device to be connected.
It may take time before “Reading” appears after
connecting, depending on the type of USB
device connected.
Do not connect the USB device through a USB
hub.
When the USB device is connected, the system
reads all the files on the USB device. If there are
many folders or files on the USB device, it may
take a long time to finish reading the USB
device.
With some connected USB devices, it may take a
long time to transmit signals from the system or
to finish reading the USB device.
Compatibility with all encoding/writing software
cannot be guaranteed. If audio files on the USB
device were originally encoded with
incompatible software, those files may produce
noise or may malfunction.
The system does not necessarily support all the
functions provided in a connected USB device.
Charging to a USB device stops under a high
temperature environment.
Listening to a file on a USB device
Connecting a USB device
to the USB port on the front
of the unit
19
GB
Listening to a file on a USB device
To listen to High-Resolution Audio from your
computer, install the dedicated driver*
2
to
your computer.
*
2
For Mac OS, a driver is not required.
1
Download the driver from the
website below;
For customers in Europe:
http://www.sony.eu/support
For customers in other countries/
regions:
http://www.sony-asia.com/support
2
Install the driver.
Follow the procedure on the website.
3
Press FUNCTION to select “USB
REAR.
4
Connect a computer, WALKMAN®
or Xperia which is compatible
with High-Resolution Audio, etc.,
to the (USB REAR) port on the
rear of the unit.
Operate playback by the computer,
WALKMAN® or Xperia which is
compatible with High-Resolution
Audio. For details, see the operating
instructions of your computer,
WALKMAN® or Xperia.
Note
If you connect a WALKMAor Xperia to this
port, use a USB cable (not supplied) and an
optional cable for WALKMAN® or Xperia*
3
(not
supplied).
If you play back High-Resolution Audio by
connecting your computer, “Hi-Res Audio
Player” (for Windows/Mac OS) is recommended.
The player can be downloaded for free;
The USB device cannot be charged from the
(USB REAR) port.
*
3
Optional High-Resolution Audio USB Adaptor
WM-PORT Cable can be ordered from your
nearest Sony dealer. To connect Xperia, use a
commercially available cable.
For details about playable audio formats,
see “Section for USB port” (page 48).
Connecting a USB device
to the USB port on the rear
of the unit
For customers in Europe:
http://www.sony.eu/support
For customers in other countries/regions:
http://www.sony-asia.com/support
Playable audio formats
20
GB
Playing via USB
connection
You can play an iPhone/iPad/iPod by
connecting it to the (USB FRONT) port in
the front of the unit.
For details on compatible iPhone/iPad/iPod,
see “Compatible devices and versions”
(page 45).
1
Press FUNCTION to select “USB
FRONT.
2
Connect an iPhone/iPad/iPod to
(USB FRONT) port on the front
of the unit using the cable
supplied with the iPhone/iPad/
iPod.
The display changes to “iPod.
3
Press .
Starts playback.
You can fast-rewind/fast-forward the
track or select the track using buttons
on the remote or the unit.
Tip
Charging begins automatically when you
connect an iPhone/iPad/iPod to the system.
If an iPhone/iPad/iPod cannot be charged,
disconnect and reconnect it. For details on the
charging status of an iPhone/iPad/iPod, see the
operating manual of an iPhone/iPad/iPod.
Note
Before disconnecting the iPhone/iPad/iPod,
turn off the system. If you disconnect it when
the system is on, the data stored on the iPhone/
iPad/iPod may be corrupted.
Do not carry the system with an iPhone/iPad/
iPod connected to the system. Doing so may
cause a malfunction.
To use an iPhone/iPad/iPod, refer to the user’s
guide of your iPhone/iPad/iPod.
Sony cannot accept responsibility in the event
that data recorded to iPhone/iPad/iPod is lost or
damaged when using an iPhone/iPad/iPod with
this system.
Playing via wireless
connection (AirPlay)
You can play back via a wireless connection.
For details, see the Wi-Fi Startup Guide
(separate document).
Listening to music of an iPhone/iPad/
iPod
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56

Sony CMT-SX7B Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI