VTech CS6199-4 User manual

Complete user’s manual

w w w . v t e c h p h o n e s . c o m

Model: CS6199-4

Congratulations

on purchasing your new VTech product. Before using this telephone, please read

Important safety instructions on page 65 of this manual.

This manual has all the feature operations and troubleshooting necessary to install

and operate your new VTech telephone. Please review this manual thoroughly to

ensure proper installation and operation of this innovative and feature rich VTech

product. For support, shopping, and everything new at VTech, visit our website at

www.vtechphones.com. In Canada, please visit www.vtechcanada.com.

The ENERGY STAR

®

program (www.energystar.gov) recognizes

and encourages the use of products that save energy and help

protect our environment. We are proud to mark this product with

the ENERGY STAR

®

label indicating it meets the latest energy

efciency guidelines.

T

Compatible with

Hearing Aid T-Coil

TIA-1083

Telephones identied with this logo have reduced noise and interference

when used with most T-coil equipped hearing aids and cochlear implants.

The TIA-1083 Compliant Logo is a trademark of the Telecommunications

Industry Association. Used under license.

Register online to get an additional 3-month warranty!

Visit www.vtechphones.com.

Registration

Register your product online for enhanced warranty support.

Product news

Learn about the latest VTech products.

Table of contents

i

Getting started ............................ 1

Parts checklist .................................... 1

Telephone base and charger

installation ...................................... 2

Battery installation .............................. 3

Battery charging ................................. 4

Rewiring of telephone line for

cable/VoIP service users ................ 5

Handset layout.................................... 6

Telephone base layout ....................... 8

Telephone settings ..................... 9

Using the menu .................................. 9

Handset ringer volume ....................... 9

Telephone base ringer volume ......... 10

Ringer tone ....................................... 10

Quiet mode ...................................... 11

Set date and time ............................. 12

LCD language................................... 13

Voicemail number ............................. 14

Clear voicemail ................................. 15

Key tone ........................................... 16

Home area code ............................... 16

Dial mode ......................................... 17

Telephone operation ................ 18

Make a call ....................................... 18

Predial a call ..................................... 18

Answer a call .................................... 18

End a call .......................................... 18

Speakerphone .................................. 18

Volume ............................................. 19

Mute.................................................. 19

Call waiting ....................................... 19

Temporary ringer silencing ............... 19

Temporary tone dialing ..................... 20

Redial .............................................. 20

Check voicemail ............................... 21

Chain dialing ..................................... 21

Find handset ..................................... 22

Web address .................................... 22

Transfer a call ................................... 23

Multiple handset use ................ 24

Join a call in progress ...................... 24

Intercom............................................ 25

Answer an incoming call during an

intercom call ................................. 25

Call transfer using intercom .............. 26

Directory .................................... 27

About the directory ........................... 27

Add a directory entry ........................ 28

Review and dial from the directory ... 30

Alphabetical search .......................... 30

Edit a directory entry......................... 31

Delete a directory entry .................... 31

Speed dial......................................... 32

Assign a speed dial entry ................. 32

Reassign a speed dial entry ............. 33

Dial a speed dial number .................. 33

Delete a speed dial entry .................. 33

Caller ID ..................................... 34

About caller ID .................................. 34

Information about caller ID with

call waiting .................................... 34

Caller ID log ...................................... 35

Missed call indicator ......................... 35

Memory match .................................. 36

Review and dial from the

caller ID log .................................. 36

ii

Table of contents

View dialing options .......................... 37

Save a caller ID log entry to

the directory .................................. 38

Delete the caller ID log entries ......... 39

Caller ID log screen messages......... 39

Answering system settings ..... 40

Answering system ............................ 40

Announcement ................................. 40

Record your own announcement...... 40

Play the announcement .................... 41

Delete your announcement .............. 41

Answer on/off.................................... 42

Call screening ................................... 43

Number of rings ................................ 43

Remote access code ........................ 44

Message alert tone ........................... 44

Recording time ................................. 45

Answering system operation

... 46

Answering system and voicemail ..... 46

Using the answering system and

voicemail together ........................ 46

Message capacity ............................. 47

New message indication................... 47

Call screening ................................... 48

Call intercept..................................... 48

Message playback ............................ 49

Delete all messages ......................... 50

Record, play or delete memos.......... 50

Message window displays ................ 51

Remote access ................................. 52

Appendix ................................... 53

Screen messages ............................. 53

Handset and telephone base

indicators ...................................... 55

Battery .............................................. 56

Troubleshooting ................................ 57

Important safety instructions............. 65

Precautions for users of implanted

cardiac pacemakers ..................... 66

Operating range................................ 66

ECO mode ........................................ 66

Maintenance ..................................... 67

About cordless telephones ............... 68

The RBRC

®

seal .............................. 68

Limited warranty ............................... 69

FCC, ACTA and IC regulations ........ 71

Technical specications.................... 72

Index .......................................... 73

1

Parts checklist

Your telephone contains the following items. Save your sales receipt and original

packaging in the event warranty service is necessary.

Getting started

To purchase replacement batteries or power adapters, visit our website at

www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to

www.vtechcanada.com or call 1 (800) 267-7377.

Telephone

line cord

Handsets (4)

Chargers and

charger adapters (3)

Telephone base

power adapter

Batteries (4)

Battery compartment

covers (4)

Abridged user’s manual

Quick start guide

2

Getting started

Telephone base and charger installation

Install the telephone base and chargers as shown below.

If you subscribe to digital subscriber line (DSL) high-speed Internet service through

your telephone line, you must install a DSL lter between the telephone line cord and

telephone wall jack. Contact your DSL service provider for more information about

DSL lter.

Use only the power adapters supplied with this product. To order a replacement, visit

our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to

www.vtechcanada.com or call 1 (800) 267-7377.

The power adapters are intended to be correctly oriented in a vertical or oor mount

position. The prongs are not designed to hold the plug in place if it is plugged into a

ceiling, under-the-table or cabinet outlet.

CAUTION:

If you subscribe to telephone service from a cable company or a VoIP service provider, plug the

telephone line cord into the modem/router/terminal adapter provided by your cable/VoIP service

provider. Contact your cable/VoIP service provider if you have any difculties in installation.

•

Telephone base

Charger

Telephone

base power

adapter

Telephone

line cord

Telephone wall jack

A DSL lter (not

included) is required

if you have DSL high-

speed Internet service.

The DSL lter must

be plugged into the

telephone wall jack.

Charger

adapter

Electrical outlet

(not controlled

by a wall switch)

3

Getting started

Place the battery with the label

THIS SIDE UP facing up and the

wires inside the battery compartment.

2.Insert the battery connector securely

into the socket, matching the

orientation of the engraved label.

1.

Slide the battery compartment cover

towards the center of the handset

until it clicks into place.

3. Place the handset in the telephone base

or charger to charge.

4.

Battery installation

Install the battery as shown below.

If the handset will not be used for a long period of time, disconnect and remove the

battery to prevent any possible leakage.

To purchase replacement batteries, visit our website at www.vtechphones.com or

call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.

•

The LCD backlight

turns on for

10 seconds to

denote the battery

starts to charge.

IMPORTANT:

Check for a dial tone by pressing . If you hear a dial tone, the installation is successful.

If you do not hear a dial tone:

Make sure the installation procedures described above are properly done.

It may be a wiring problem. If you have changed your telephone service to digital service from

a cable company or a VoIP service provider, the telephone line may need to be rewired to

allow all existing telephone jacks to work. Refer to Rewiring of telephone line for cable/VoIP

service users on page 5 for more information.

•

4

Getting started

Battery charging

Once you have installed the battery, the screen indicates the battery status

(see the table below). If necessary, place the handset in the telephone base or charger

to charge the battery. For best performance, keep the handset in the telephone base

or charger when not in use. The battery is fully charged after 11 hours of continuous

charging. See the table on page 56 for battery operating times.

If the screen is blank or displays Put in charger, you need to charge the handset

without interruption for at least 30 minutes to give the handset enough charge to use

for a short time. When the battery is low, the handset displays Low battery along

with a ashing icon. If you are on a call in low battery mode, the handset plays short

beeps to alert you.

The following table summarizes the battery charge indicators and actions to take.

Battery indicators Battery status Action

The screen is blank, or

displays Put in charger and

ashes.

The battery has no or very

little charge. The handset

cannot be used.

Charge without interruption

(at least 30 minutes).

The screen displays

Low battery and

ashes.

The battery has enough

charge to be used for a short

time.

Charge without interruption

(about 30 minutes).

The screen displays

HANDSET X.

The battery is charged. To keep the battery charged,

place it in the telephone

base or charger when not

in use.

If you place the handset in the telephone base or charger without plugging in a battery, the

screen displays No battery.

After you install your telephone or power returns following a power

outage, the handset will prompt you to set the date and time.

For instructions, see Set date and time on page 12. To skip

setting, press CANCEL.

Date: MM/DD/YY

ANS ON

ECO

5

Getting started

Rewiring of telephone line for cable/VoIP service users

If you have changed to cable/VoIP service through a modem/router/terminal adapter

to establish telephone connection, the existing telephone jacks in your home may no

longer work. Your cable/VoIP service provider uses a seperate cable connecting from

the main line to the modem installed in your home.

To allow all existing telephone jacks to work, rewiring of the telephone line (as

indicated by the dotted line in the illustration below) may be needed. Rewiring requires

professional installation (fees may apply). Contact your cable/VoIP service provider for

more information.

Main cable

line

NEW

Main

landline

OLD

Modem/Router/

Terminal adapter

Conventional

telephone line jack

6

Getting started

Handset layout

REDIAL/PAUSE

Press repeatedly to review the last 10 numbers dialed

(page 20).

While dialing or entering numbers, press and hold to insert

a dialing pause (page 18, page 28 or page 38).

/ / VOLUME

Press to review the directory when the phone is not in use

(page 30).

During a call or message playback, press to increase the

listening volume (page 19 or page 49).

Press to scroll up while in a menu, or reviewing the

directory, caller ID log or redial list.

While entering numbers or names in the directory, press

to move the cursor to the right.

/FLASH

Press to make or answer a call (page 18).

During a call, press to answer an incoming call when you

receive a call waiting alert (page 19).

1

While reviewing a caller ID log entry, press repeatedly to

add or remove 1 in front of the caller ID log entry before

dialing or saving it to the directory (page 37).

Press and hold to set or dial your voicemail number

(page 14 and page 21).

TONE

While on a call, press to switch to tone dialing temporarily

when using pulse service (page 20).

Dialing keys

Press to enter numbers or characters.

Press to answer an incoming call (page 18).

Press to make or answer a call using the handset

speakphone (page 18).

During a call, press to switch between the handset

speakerphone and the handset earpiece (page 18).

•

7

Getting started

Handset layout

CID/ /VOLUME

Press to review the caller ID log when the phone is not in

use (page 36).

During a call or message playback, press to decrease the

listening volume (page 19 or page 49).

Press to scroll down while in a menu, or reviewing the

directory, caller ID log or redial list.

While entering numbers or names in the directory, press to

move the cursor to the left.

MENU/SELECT

Press to show the menu (page 9).

While in a menu, press to choose an item, or save an

entry or setting.

OFF/CANCEL

During a call, press to hang up.

While the handset is ringing, press to silence the ringer

temporarily (page 19).

Press and hold to erase the missed call indicator when the

phone is not in use (page 35).

While in a menu, press to return to the previous menu,

or press and hold to return to idle mode, without making

changes.

QUIET

#

Press and hold to set and turn on the quiet mode, or turn it

off (page 11).

Press repeatedly to show other dialing options when

reviewing a caller ID log entry (page 37).

INT

Press to start an intercom conversation or transfer a call

(page 25 or page 26 ).

MUTE/DELETE

While on a call, press to mute the microphone

(page 19).

While using the dialing keys, press to delete digits or

characters (page 18 and page 28).

While the handset is ringing, press to silence the ringer

temporarily (page 19).

When reviewing the directory, caller ID log or redial list,

press to delete the displayed entry (page 31, page 39 or

page 20).

•

8

Getting started

Telephone base layout

/VOL+ and /VOL-

Press to adjust the listening volume during message

playback (page 49).

Press to adjust the telephone base ringer volume when

the phone is not in use (page 10).

Press to page all system handsets (page 22).

Message window

Shows the number of messages, and other information

of the answering system or telephone base (page 51).

ANS ON/OFF

Press to turn the answering system on or off (page 42).

X/DELETE

Press to delete the playing message (page 49).

Press twice to delete all previously reviewed messages

when the phone is not in use (page 49).

/REPEAT

Press to repeat a message (page 49).

Press twice to play the previous message (page 49).

/SKIP

Press to skip to the next message (page 49).

/PLAY/STOP

Press to play messages (page 49).

Press to stop message playback (page 49).

•

9

Telephone settings

Using the menu

You can use a cordless handset to change the telephone settings.

In the ringers menu, you can select the ringer tones and adjust the ringer volume for

incoming calls.

In the settings menu, you can change the settings for LCD language, voicemail

number, voicemail indicators, key tone, home area code and dial mode.

Go to Answering system settings (from page 40 to page 45) for instructions to

change the answering system settings.

To enter the handset menu:

Press MENU when the phone is not in use.

Press or until the handset displays the desired

feature menu.

Press SELECT to enter that menu.

To return to the previous menu, press CANCEL.

To return to idle mode, press and hold CANCEL.

Handset ringer volume

You can adjust the ringer volume or turn the ringer off on each handset. When the

ringer is turned off, the handset displays and Ringer off.

Press MENU when the handset is not in use.

Press or until the handset displays Ringers, then

pressress SELECT.

The handset displays Ringer volume, then press

SELECT again.

Press or to sample each ringer volume level.

Press SELECT to save your selection. You hear a

conrmation tone.

The ringer volume also determines the ringer volume for

intercom calls. If the ringer volume is set to off, that handset

is silenced for all incoming calls except paging tone.

1.

2.

3.

•

1.

2.

3.

4.

5.

Ringers

ANS ON

ECO

Ringer volume

ANS ON

ECO

Volume:

ANS ON

ECO

10

Telephone settings

Telephone base ringer volume

Press /VOL

+

or /VOL

-

on the telephone base to adjust the

ringer volume when the phone is not in use.

When you set the ringer volume to zero, the base ringer is off

and the telephone base announces, “

Base ringer is off.”

Ringer tone

You can choose from different ringer tones on each handset.

Press MENU when the handset is not in use.

Press or until the handset displays Ringers,

then press SELECT.

Press or until the handset displays Ringer tone,

then press SELECT.

The handset displays Tone: with the current setting displayed.

Press or to sample each ringer tone.

Press SELECT to save your selection. You hear a

conrmation tone.

If you turn off the ringer volume, you will not hear ringer

tone samples.

1.

2.

3.

4.

5.

Ringers

ANS ON

ECO

Ringer tone

ANS ON

ECO

Tone: 1

ANS ON

ECO

11

Telephone settings

Quiet mode

You can turn on the quiet mode for a period of time (1-12 hours). During this period,

all tones (except paging tone) and call screening are muted.

When you turn on the quiet mode, the answering system turns on automatically. When

the quiet mode duration expires, the answering system remains on.

To set the duration and turn on the quiet mode:

Press and hold QUIET

#

when the handset is not in use.

The handset displays Quiet: _ _ hours. Use the dialing keys

(0-9) to enter the desired duration (01-12).

Press SELECT to save. You hear a conrmation tone.

The handset displays Quiet mode on, ANS ON and .

The ANS ON/OFF light on the telephone base turns on.

To turn off the quiet mode:

Press and hold QUIET# when the handset is not in use. The

handset displays Quiet mode off briey and then returns to idle.

When you change the settings of the ringer tone, handset ringer

volume or telephone base ringer volume, you can still hear the

samples even if the quiet mode is on.

1.

2.

3.

•

Quiet: __ hours

[ 1-12 ]

ECO

Quiet: 10 hours

[ 1-12 ]

ECO

Quiet mode on

10:01

AM

ANS ON

ECO

08/20

12

Telephone settings

Set date and time

The answering system announces the date and time of each message prior to

playing it. Before using the answering system, set the date and time as follows. If you

subscribe to caller ID service, the day, month and time are set automatically with each

incoming call. However, the year must be correct so that the day of the week can be

calculated from the caller ID information.

Press MENU when the handset is not in use.

Press or until the handset displays Set date/time,

then press SELECT.

Press or to select the month then press SELECT,

or use the dialing keys to enter a two-digit number (01-12).

Press or to select the date then press SELECT,

or use the dialing keys to enter a two-digit number (01-31).

Press or to select the year then press SELECT,

or use the dialing keys to enter a two-digit number (00-99) then

press SELECT.

Press or to select the hour then press SELECT,

or use the dialing keys to enter a two-digit number (01-12).

Press or to select the minute then press SELECT,

or use the dialing keys to enter a two-digit number (00-59).

Press or to select AM or PM.

Press SELECT to save the settings. You hear a conrmation tone.

If the date and time are not set when a message is recorded, the system announces,

“Time and date not set,” before each message plays.

The phone plays two beeps if you enter an invalid number.

1.

2.

3.

4.

5.

6.

7.

8.

9.

•

Set date/time

ANS ON

ECO

Date: MM/DD/YY

ANS ON

ECO

Time: HH/MM

- -

ANS ON

ECO

13

Telephone settings

LCD language

You can select English, French or Spanish to be used in all screen displays.

Press MENU when the handset is not in use.

Press or until the handset displays Settings,

then press SELECT.

Press SELECT to choose LCD language.

Press or to choose English, Français or Español,

then press SELECT.

The screen displays Set English? when you

choose English.

The screen displays Set Francais? when you

choose Français.

The screen displays Set Espanol? when you

choose Español.

5. Press SELECT to save your selection. You hear a conrmation tone.

If you accidentally change the LCD language to French or Spanish, you can reset it to

English easily by pressing MENU then entering 364#

.

1.

2.

3.

4.

•

Settings

ANS ON

ECO

LCD language

ANS ON

ECO

English

ANS ON

ECO

14

Telephone settings

Voicemail number

If you subscribe to voicemail service offered by your telephone service provider,

you can save the voicemail number to 1 on each handset for easy access.

When you want to retrieve voicemail messages, press and hold 1. Contact your

telephone service provider for more information and assistance about using your

voicemail service.

To set your voicemail number:

Press and hold 1 when the phone is not in use.

Use the dialing keys to enter the voicemail number (up to

30 digits).

Press or to move the cursor to the left or right.

Press DELETE to erase a digit.

Press and hold DELETE to erase all digits.

Press and hold PAUSE to insert a dialing pause (a P appears).

3. Press SELECT to save. Then the handset dials the saved voicemail number.

-OR-

Press MENU when the handset is not in use.

Press or to scroll to Settings, then press SELECT.

Press or to scroll to Voicemail #, then press SELECT.

Use the dialing keys to enter the voicemail number

(up to 30 digits).

Press or to move the cursor to the left or right.

Press DELETE to erase a digit.

Press and hold DELETE to erase all digits.

Press and hold PAUSE to insert a dialing pause

(a P appears).

Press SELECT to save. The handset displays VM # saved and

the stored number. You hear a conrmation tone.

1.

2.

•

1.

2.

3.

4.

•

5.

Settings

ANS ON

ECO

Voicemail #

ANS ON

ECO

Voicemail #

_

ANS ON

ECO

15

Telephone settings

Clear voicemail

If you subscribe to voicemail service offered by your telephone service provider,

the handsets display New voicemail and when you have new voicemail

messages. Contact your telephone service provider for more information about

using your voicemail service.

After you have listened to all new voicemail messages, the indicators on the handsets

turn off automatically.

Use the clear voicemail feature when the telephone indicates that there is new

voicemail but there are none (for example, when you have accessed your voicemail

while away from home). The clear voicemail feature only turns off the indicators;

it does not delete your voicemail messages. As long as you have new voicemail

messages, your telephone service provider continues to send the signal to turn on

the indicators.

To manually turn off these indicators:

Press MENU when the handset is not in use.

Press or until the handset displays Settings,

then press SELECT.

Press or until the handset displays Clr voicemail,

then press SELECT. The handset displays Reset VM Icon?

Press SELECT to save your selection. You hear a

conrmation tone.

Your telephone service provider may alert you of new messages

with a stutter (broken) dial tone. Contact your telephone service

provider for details.

1.

2.

3.

4.

Settings

ANS ON

ECO

Clr voicemail

ANS ON

ECO

Reset VM Icon?

ANS ON

ECO

16

Telephone settings

Key tone

You can turn the key tone on or off for each handset.

If you turn the key tone on, the handset beeps with each key press. If you turn the key

tone off, there are no beeps when you press the handset keys.

Press MENU when the handset is not in use.

Press or until the handset displays Settings,

then press SELECT.

Press or

until the handset displays

Key tone,

then press SELECT.

Press or

to choose Key tone:On or Key tone:Off.

Press SELECT to save your selection. You hear a

conrmation tone.

Home area code

If you dial local calls using only seven digits (area code not

required), you can program your home area code so that when

you receive a call within your local area, the telephone number is

automatically stored in the caller ID log without the area code.

Press MENU when the phone is not in use.

Press or until the handset displays Settings,

then press SELECT.

Press or until the handset displays Home area code,

then press SELECT.

Use the dialing keys (0-9) to enter the desired home

area code.

Press DELETE to delete a digit.

Press and hold DELETE to delete all digits.

5. Press SELECT to save. You hear a conrmation tone.

If, in the future, your telephone service provider requires you to dial the area code when

making a local call, or, if you move to a location that requires it, follow the steps above to

delete the home area code you have already programmed. After you have deleted the

home area code, _ _ _ appears.

1.

2.

3.

4.

5.

1.

2.

3.

4.

•

Settings

ANS ON

ECO

Key tone

ANS ON

ECO

Key tone:On

ANS ON

ECO

Settings

ANS ON

ECO

Home area code

ANS ON

ECO

Home area code

_ _ _

ANS ON

ECO

Page is loading ...

VTech CS6199-4 User manual

This manual is also suitable for

VTech CS6199-4 User manual

Related papers

Other documents