Canon PIXMA MP810 Quick start guide

Category
Car video systems
Type
Quick start guide
ENGLISH
Quick Start Guide
Table of Contents
How to Use the Documentation Provided 2
Reading the On-screen Manuals 3
Preparing the Machine 4
Installing the MP Drivers 6
Introduction 7
Selecting the Language for the LCD 8
Loading Printing Paper 9
Basic Operation for the Operation Panel 11
Printing from Your Computer 13
Scanning Images 15
Copying 16
Printing from a Memory Card 17
Photo Printing from Photo or Film 21
Printing Photographs Directly from a Compliant Device 25
Replacing an Ink Tank 32
ENGLISH
Exif Print
This machine supports Exif Print.
Exif Print is a standard for enhancing the communication between digital cameras and
printers. By connecting to an Exif Print-compliant digital camera, the camera’s image
data at the time of shooting is used and optimized, yielding extremely high quality
prints.
Canadian Radio Interference Regulations
This digital apparatus does not exceed the Class B limits for radio noise emissions from
a digital apparatus as set out in the interference-causing equipment standard entitled
“Digital Apparatus,” ICES-003 of the Industry Canada.
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux
appareils nuriques de Classe B prescrites dans la norme sur le matériel brouilleur
NMB-003 d'Industrie Canada intitulée « Appareils numériques ».
International ENERGY STAR
®
Program
As an ENERGY STAR
®
Partner, Canon Inc. has determined that this product meets the
ENERGY STAR guidelines for efficiency.
The International ENERGY STAR
®
Office Equipment Program is a
global program that promotes energy saving through the use of
computer and other office equipment. The program backs the
development and dissemination of products with functions that
effectively reduce energy consumption. It is an open system in which
business can participate voluntarily. The targeted products are office
equipment such as computers, monitors, printers, faxes and copiers.
Their standards and logos are uniform among participating nations.
Power Requirements
Never use a power supply voltage other than that supplied in the country of purchase.
Using the incorrect voltage could cause a fire or electric shock. The correct power
supply voltages and frequencies are as follows:
AC 100-240V, 50/60Hz
About Consumables
Consumables (ink tanks / FINE Cartridges) are available for 5 years after production
has stopped.
.
Model Number: K10289 (MP810)
Also read the Safety Precautions in the User’s Guide on-screen manual. Observe the warnings
and cautions to avoid personal injury or damage to the machine.
1
ENGLISH
Safety Precautions
European Union (and EEA) only.
This symbol indicates that this product is not to be disposed of with your
household waste, according to the WEEE Directive (2002/96/EC) and your
national law. This product should be handed over to a designated collection
point, e.g., on an authorized one-for-one basis when you buy a new similar
product or to an authorized collection site for recycling waste electrical and
electronic equipment (EEE). Improper handling of this type of waste could
have a possible negative impact on the environment and human health due to
potentially hazardous substances that are generally associated with EEE. At
the same time, your cooperation in the correct disposal of this product will
contribute to the effective usage of natural resources. For more information
about where you can drop off your waste equipment for recycling, please
contact your local city office, waste authority, approved WEEE scheme or your
household waste disposal service.
For more information regarding return and recycling of WEEE products,
please visit www.canon-europe.com/environment
.
(EEA: Norway, Iceland and Liechtenstein)
For Customers in Europe, Middle-East, Africa and
Russia only
For Canon Customer Support contacts, please see the back cover of the European Warranty
Systems (EWS) Booklet or visit www.canon-europe.com.
Canon Europa N.V., Bovenkerkerweg 59-61, 1185 XB Amstelveen, The Netherlands
Bluetooth ID: B02954
Warning
z This product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities,
please move away from this product and consult your doctor.
z Never attempt to plug the power cord into the power outlet or unplug the power cord when your hands
are wet.
z Never damage, modify, stretch, or excessively bend or twist the power cord. Do not place heavy objects
on the power cord.
z Never use any power supply other than the standard power supply available in the country of purchase.
Using the incorrect voltage and frequency could cause a fire or electric shock.
z Always push the plug all the way into the power outlet.
Caution
z For safety reasons, store ink tanks out of the reach of small children.
z Do not drop or shake ink tanks as this may cause the ink to leak out and stain your clothes and hands.
2 How to Use the Documentation Provided
ENGLISH
How to Use the Documentation Provided
Easy Setup Instructions (Printed documentation)
Be sure to read this sheet first.
This sheet includes instructions for setting up your machine and getting it ready
for use.
Quick Start Guide (This guide)
Read this guide when starting to use the machine.
After following instructions in the Easy Setup Instructions, we recommend you
read this guide to familiarize yourself with the basic operation of some of the
main functions that can be performed on your machine.
On-screen Manuals
User’s Guide
Read this guide when starting to use the machine.
If the Quick Start Guide does not provide you enough information please refer to
the User’s Guide which can be installed from the Setup CD-ROM. This guide
provides detailed instructions for:
z printing from your computer
z direct photo printing from selected digital cameras
z copying
z scanning
Additional guides are also available for advanced features.
Scanning Guide
Refer to this guide for full instructions on scanning operation and settings.
Printer Driver Guide
Refer to this guide for full instructions on printer driver setting.
Photo Application Guide
Refer to this guide for full instructions on using the various application software
included on the Setup CD-ROM.
Bluetooth User’s Guide
Refer to this guide for full instructions of printing from computers and devices
that support Bluetooth communication, and on troubleshooting them.
3Reading the On-screen Manuals
ENGLISH
Reading the On-screen Manuals
Along with this Quick Start Guide, on-screen manuals are also supplied with your machine. For
detailed instructions on installing the on-screen manuals, refer to your setup sheet.
You can view the on-screen manuals in the following way:
To view the on-screen manual, double-click the MP810 On-screen Manual shortcut icon on the
desktop, or click Start > All Programs (or Programs) > Canon MP810 Manual > MP810 On-
screen Manual.
System Requirements
Browser: Windows
®
HTML Help Viewer
To view the on-screen manual, double-click the MP810 On-screen Manual alias on the desktop.
System Requirements
Browser: Help Viewer
Important
For users in countries outside the USA, Canada and South America:
For information on how to print on DVD/CDs, refer to the DVD CD Print Guide on-screen manual.
Note
z Microsoft Internet Explorer 5.0 or later must be installed.
z The on-screen manual may not be displayed properly depending on your operating system or
Internet Explorer version. We recommend that you keep your system up to date with Windows
Update.
Note
Users in Asia
If you installed the User’s Guide from the Manual folder in the Setup CD-ROM, open the folder in which
you copied the User’s Guide and double-click top.htm.
Note
z The on-screen manual may not be displayed properly depending on your operating system. We
recommend that you keep your system up to date.
z We recommend using Safari as your Web browser to view the HTML format on-screen
manuals. If Safari is not installed on your computer, download it from Apple Computer, Inc.
website and install it.
4 Preparing the Machine
ENGLISH
Preparing the Machine
Be sure to read your setup sheet first for setting up your machine and getting it ready for use.
Unpack the machine
Please confirm the included items against the illustration printed on the lid of the packing box.
1 Turn on the machine.
2 Install the Print Head.
3 Install the ink tanks.
Important
z Do not connect the USB cable until after the software is installed.
z A USB cable is necessary to connect the machine with your computer.
Caution
Be sure to remove the tapes before you turn on the machine.
Note
z The tape position is subject to change.
z If an unintended language is displayed on the LCD, press the Back button to return to the
Language selection screen.
Caution
Do not touch internal parts other than the Print Head Lock Lever.
Important
If the Scanning Unit (Printer Cover) is open for more than 10 minutes, the Print Head Holder
moves to the right side. In this case, close the Scanning Unit (Printer Cover), and open it again.
Note
z There might be some transparent or light blue ink on the inside of the bag the print head comes
in, or the inside of the protective cap - this has no effect on print quality. Be careful not to get ink
on yourself when handling these items.
z Do not reattach the protective cap once it has been removed.
Important
z Make sure that all the ink tanks are installed in the correct position, matching the label. The
machine cannot be used unless all the ink tanks are installed.
z Wait for about 2 minutes, until the machine has stopped making operating noises, before
proceeding.
Note
z Be sure to remove the clear film from the ink tank in the exact order as shown in step 3 of your
setup sheet.
z Do not squeeze the side of ink tanks as this may cause the ink to leak out and stain your clothes
and hands.
z Do not reattach the protective cap once you have removed it.
z An error message will be displayed on the LCD if an ink tank is not installed properly. Open the
Scanning Unit (Printer Cover) and make sure that position of all the ink tanks match the label.
5Preparing the Machine
ENGLISH
4 Load printing paper.
In the following process, you will be required to perform the Print Head Alignment, and you
will need two sheets of supplied paper (MP-101) loaded with the printing side (whiter side)
facing up in the Auto Sheet Feeder.
Important
z When loading paper in the Auto Sheet Feeder, make sure that the Auto Sheet Feeder lamp is
lit.
z Always load paper in portrait orientation. Loading paper in landscape orientation can cause the
paper to be jammed.
Notes on the Print Head Alignment
z Print Head Alignment will take about 14 minutes to complete. Do not open the Scanning Unit
(Printer Cover) while printing.
z If the pattern is not printed successfully, refer to “Error Message Is Displayed on the LCD” in the
User’s Guide on-screen manual.
Important
Printing on DVD/CDs is not available for the machines sold in USA, Canada, all countries in South
America, and some other countries and regions.
6 Installing the MP Drivers
ENGLISH
Installing the MP Drivers
Information Common to Windows and Macintosh
®
Notes on the Installation Process
z If the Select Language screen appears, select a language, then click Next.
z If the Select Your Place of Residence screen appears, select your place of residence, then
click Next.
z There are two ways of installing the MP Drivers and other software:
Easy Install: the items included on the Setup CD-ROM are installed automatically
Custom Install: you can select particular items to install
z When the User Registration screen appears, if you click Register and your computer is
connected to the Internet, the on-screen instructions to register your product will appear.
z Registration can also be performed from the icon on the desktop after installation is
completed.
Information for Windows
Information for Macintosh
Note
z When installing the MP Drivers in Windows XP or Windows 2000, log on to the system as a
member of the Administrators group.
z Before installing the drivers, disable all anti-virus
programs and automatically loading programs.
z If the following screen appears automatically, remove
the USB cable connected to your computer. Next, click
Cancel to quit the screen and turn off the machine. Then
start the installation process again. For details on the
installation process, refer to your setup sheet.
z To install Adobe
®
RGB (1998), click Custom Install and
follow the instruction on the screen.
z Adobe RGB (1998) cannot be installed in Windows Me
and Windows 98.
z When a message asking for your confirmation to restart
your computer appears during the installation process,
click OK. The system is restarted automatically.
z If the connection is not recognized, refer to “Cannot
Install the MP Drivers” in the User’s Guide on-screen
manual.
Note
Before installing the MP Drivers, disable all anti-virus programs and automatically loading
programs or remove them from your system folder.
Users in Asia
To install the User’s Guide on-screen manual in a language other than the installed one, double-
click the Manual folder in Setup CD-ROM, Canon folder, and then copy a language folder to your
hard disk.
7Introduction
ENGLISH
Introduction
Thank you for purchasing the Canon MP810.
This Quick Start Guide uses the following symbols to indicate important information. Always observe
the instructions indicated by these symbols.
Warning
Instructions that, if ignored, could result in death or serious personal injury caused by incorrect
operation of the equipment. These must be observed for safe operation.
Caution
Instructions that, if ignored, could result in personal injury or material damage caused by incorrect
operation of the equipment. These must be observed for safe operation.
Important
Instructions that must be observed for safe operation.
Trademark Notices
z Microsoft” and “Windows” are either registered trademarks or trademarks of Microsoft
Corporation in the U.S. and/or other countries.
z “Macintosh” and “Mac” are trademarks of Apple Computer, Inc., registered in the U.S. and
other countries.
z “Adobe” and “Adobe RGB (1998)” are either registered trademarks or trademarks of Adobe
Systems Incorporated in the United States and/or other countries.
z “SmartMedia” is a trademark of Toshiba Corporation.
are trademarks of Sony Corporation.
z “xD-Picture Card” is a trademark of Fuji Photo Film Co., Ltd.
z MultiMediaCard is a trademark of the MultiMediaCard Association.
z “SD Secure Digital memory card” and “miniSD Card” are trademarks of SD Association.
z Specifications are subject to change without notice.
Copyright ©2006 CANON INC.
All rights reserved. No part of this publication may be transmitted or copied in any form
whatsoever without the express written permission.
z MEMORY STICK”, “Memory Stick PRO”, “MEMORY STICK Duo” and “Memory Stick PRO Duo”
8 Selecting the Language for the LCD
ENGLISH
Selecting the Language for the LCD
1 Press the HOME button. Wait for about 5 seconds, select , and then press the
OK button.
2 Press the ] button to select , then press the OK button.
3 Press the } button four times, then press the OK button.
If the Bluetooth unit is connected to the machine, press the } button five times, and then
press the OK button.
4 Press the { or } button to select the language you want to be displayed, then
press the OK button.
9Loading Printing Paper
ENGLISH
Loading Printing Paper
Some types and sizes of paper are not loadable in the Cassette and requires the use of the Auto
Sheet Feeder. If you intend to use only the Cassette, check for any usage restrictions in advance.
1 Pull out the Cassette from the machine.
2 Load the paper in the Cassette with the print
side facing DOWN, aligning the paper stack
against the right side of the Cassette.
Do not load higher than the Load Limit Mark (A).
3 Slide the paper guides (B) to fit to the loaded
paper stack.
4 Insert the Cassette into the machine.
Push the Cassette all the way into the machine.
Important
z If you cut plain paper to 4" x 6" / 101.6 x 152.4 mm, 5" x 7" / 127.0 x 177.8 mm, or 2.13" x 3.39" / 54.0 x
86.0 mm (credit card-size) for a trial print, it can cause paper jams.
z Always load paper in portrait orientation. Loading paper in landscape orientation can cause the paper
to be jammed.
(A)
(B)
10 Loading Printing Paper
ENGLISH
5 Put your finger in the rounded indent of the
Paper Output Tray (A) and open it gently, and
open the Output Tray Extension (B).
6 Press the Paper Feed Switch (C) so that the
Cassette lamp (D) lights.
12 Basic Operation for the Operation Panel
ENGLISH
Settings: You can perform the maintenance or change the various settings
of the machine. For details, refer to “When Printing Becomes
Faint or Colors Are Incorrect”, “Cleaning Your Machine”, or
Changing the Machine Settings” in the User’s Guide on-screen
manual.
Easy photo reprint: You can scan printed photos and then print them. See “Photo
Printing from Photo or Filmon page 21.
Film print: You can scan the image data on the 35 mm film strips and slides
and then print them. See “Photo Printing from Photo or Filmon
page 21.
Memory card: Print the photo data stored in a memory card of a digital camera.
See “Printing from a Memory Card” on page 17.
Other Buttons
(A) NAVI button
(B) Function buttons
z NAVI Button
You can easily reach the function that you want to perform. Select what you want to do on the
navigation menu, then press the OK button.
z Function Buttons
Two Function buttons enable you to select menus displayed at the bottom of the LCD.
The screen that appears when you press a Function button depends on the screen that is
displayed and which Function button you press.
(A) Function button (f1): When you press the Function button (f1/Remaining ink vol) on the
HOME screen, the remaining ink volume screen is displayed.
(B) Function button (f2): When you press the Function button (f2/Introduction) on the
HOME screen, the introductions for the selected mode functions are
displayed.
When you press them on screens other than the HOME screen, an operation procedure or
menus is displayed.
(A) (B)
(A) (B)
13Printing from Your Computer
ENGLISH
Printing from Your Computer
This section describes procedure for basic printing.
Printing with Windows
1
Turn on the machine and load the paper in the machine.
2 Make sure that the proper paper source is selected.
3 Create a document or open a file to print using an appropriate application software.
4 Select Print on the application software’s File
menu.
5 Make sure that Canon MP810 Printer is
selected, and click Preferences (or
Properties).
6 Specify the required settings and click OK.
Make sure that Paper Feed Switch is selected in
Paper Source.
7 Click Print (or OK).
Note
For details on other printer driver functions, click Help
or Instructions to view the online help or the Printer
Driver Guide on-screen manual. Instructions is only
displayed when the on-screen manuals are installed.
14 Printing from Your Computer
ENGLISH
Printing with Macintosh
1
Turn on the machine and load the paper in the machine.
2 Make sure that the proper paper source is selected.
3 Create a document or open a file to print using an appropriate application software.
4 Select Page Setup on the application
software’s File menu.
5 Confirm that MP810 is selected in Format
for.
6 Select the desired paper size in Paper Size.
7 Click OK.
8 Select Print on the application software’s File
menu.
9 Select Quality & Media in the pop-up menu.
10 Specify the required settings.
Make sure that Paper Feed Switch is selected in
Paper Source.
11 Click Print.
Note
For details on other printer driver functions, click to
view the Printer Driver Guide on-screen manual. If the
on-screen manuals are not installed, the Printer Driver
Guide on-screen manual is not displayed even if is
clicked.
15Scanning Images
ENGLISH
Scanning Images
You can scan images from the machine to a computer without printing them and save them in
popular file formats, such as JPEG, TIFF, bitmaps, or PDF. If you are scanning printed text, you can
use the OCR (Optical Character Recognition) software to convert it to text data.
Scanning Methods
Scanning Using the MP Navigator
Using MP Navigator, you can scan originals loaded on the Platen Glass and view images saved
on your computer or on a memory card. Scanned documents can be previewed and be easily
printed and edited according to your needs.
You can use the bundled software applications to edit or print the document you have scanned.
For detailed operations of the MP Navigator, refer to the Scanning Guide on-screen manual.
Scanning Using the Operation Panel of the Machine
1 Turn on the machine.
2 Load the original document on the Platen Glass.
3 Select Scan on the HOME screen.
See “Basic Operation for the Operation Panelon page 11.
4 Select the scan operation, then press the OK button.
5 Press the Color or Black button.
The operation to be performed after scanning the original depends on the scan operation
setting you have selected in step 4. For details on how to modify the operation settings, refer
to the Scanning Guide on-screen manual.
Scanning from an Application Software
You can scan an image from a TWAIN- or WIA- (Windows XP only) compliant application
software and handle the scanned image in the application software. For detailed operations,
refer to the Scanning Guide on-screen manual.
16 Copying
ENGLISH
Copying
Making Copies
This section describes the basic procedure to make copies.
1 Turn on the machine.
2 Select Copy on the HOME screen.
See “Basic Operation for the Operation Panelon page 11.
3 Load paper.
4 Make sure that the proper paper source is selected.
5 Specify copy settings.
(1) Confirm the page size, media type, or other
settings. To change the settings, select the
item and press the OK button.
(2) Use the + or - button to specify the number of
copies.
6 Load the original on the Platen Glass.
7 Press the Color button for color copying, or
the Black button for black & white copying.
Using Other Copy Functions
Reduced/Enlarged Copy
Reduces or enlarges copies.
Two-sided copy
Copies two original pages onto the sides of a single sheet of paper.
Borderless copy
Copies color images so that they fill the entire page without borders.
2-on-1 copy
Copies two original pages onto a single sheet of paper by reducing each image.
4-on-1 copy
Copies four original pages onto a single sheet of paper by reducing each image. Four different
layouts are available.
Image repeat
Copies an image multiple times onto a single page. For the number of times to repeat the image,
you can select from Auto layout or the machine’s pre-defined settings.
(1)
(2)
17Printing from a Memory Card
ENGLISH
Printing from a Memory Card
Inserting the Memory Card
1
Turn on the machine.
2 Open the Card Slot Cover.
3 Insert one and only one memory card into the Card Slot.
* Be sure to attach the memory card to the special adapter before inserting it into the Card
Slot.
4 Confirm that the Access lamp has lit up.
5 Close the Card Slot Cover.
Card Type Inserting Card
z
Compact Flash (CF) card
z
Microdrive
z
xD-Picture card*
z
SmartMedia
z
MEMORY STICK
z
MEMORY STICK PRO
z
MEMORY STICK Duo*
z
MEMORY STICK PRO Duo*
z
SD Secure Digital memory card
z
MiniSD Card*
z
MultiMedia card (v.3.31)
Lights up
Insert into the left
Card Slot.
Lights up
Insert into the
right Card Slot.
Lights up
Insert into the
center part of the
right Card Slot.
18 Printing from a Memory Card
ENGLISH
Removing the Memory Card
1
Open the Card Slot Cover.
2 Make sure that the Access lamp is not flashing, then remove the memory card.
3 Close the Card Slot Cover.
Printing Photographs Stored on a Memory Card
1
Prepare for printing.
(1) Turn on the machine.
(2) Load paper.
(3) Make sure that the proper paper source is selected.
2 Insert the memory card.
(1) Select Memory card on the HOME screen.
See “Basic Operation for the Operation Panelon page 11.
(2) Insert the memory card into the Card Slot.
3 Select the print menu.
(1) Select Select and print, then press the OK button.
(2) Confirm the paper size, media type, and other settings, select Next, and then press the
OK button. To change the settings, select the item and press the OK button.
4 Select the photo to print and specify the number of copies for each photo.
(1) Use the Easy-Scroll Wheel or the [ or ] button to display a photo to print.
(2) Use the + or - button to specify the number of copies.
(3) Repeat steps (1) and (2) to specify the number of copies for each photo.
(4) Press the OK button.
5 Start printing.
(1) Confirm the print setting. To change the
settings, select the item and press the OK
button.
(2) Confirm the total number of copies for the
selected photos.
(3) Confirm the selected photos and number of
copies for each photo.
(4) Change the advanced print settings.
(5) Press the Color button.
The specified number of copies of each photo
will be printed.
(1)
(4) (3)
(2)
19Printing from a Memory Card
ENGLISH
Using Other Printing Functions
Layout print
Prints photos your pasted in the specified layout.
Sticker print
Prints your favorite photo with a frame on Canon Photo Stickers.
DPOF print
Prints according to the Digital Print Order Format (DPOF) settings on your digital camera, if you
have specified them.
Captured info print
Prints information on photographs at the time of its shooting (Exif info) in the margin of Photo
index print or selected individual photos.
Photo index print
Prints an index of all the photos saved on a memory card.
Print all photos
Prints all photos saved on the memory card.
Using Useful Display Functions
Change display
The display method of a photograph can be changed.
Trimming
Edits images displayed on the LCD by cropping them.
Search
When there are a lot of photos saved on the memory card, displays and prints only photos shot
on the specified date or within the specified range of dates.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

Canon PIXMA MP810 Quick start guide

Category
Car video systems
Type
Quick start guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI