HOUZER PTU-3600 BL Installation guide

Type
Installation guide
The manufacturer
Undermount Fireclay Sink
The manufacturer recommends that Fireclay sinks should be
installed by a profeessional experienced installer.
The manufacturer recommends that the sink
counertop cutout provide a 1/8” overhang
into the sink bowl opening. However it is strongly
recommended to understand and agree to the
consumer’s requirement and desired finished
appearance before you start the process.
A
Apron-front fireclay sinks
the manufacturer the manufacturer
The manufacturer
the manufacturer for
Set the sink into place and then level the sink with the
top of the cabinet Apply sealant near the inside edge.
Countertop
Silicone Caulk
(Not Furnished)
1/8” Overhang
Recommended
Sink
Cabinet
Underlayment
  • Page 1 1
  • Page 2 2

HOUZER PTU-3600 BL Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI