1. Determine the exact length of track needed for your installation.

3. Using the saw included in your kit, cut the marked piece of track to

achieve the desired total length.

• Please note: the best appearance will be achieved by making a straight clean

90 degree cut to the track. !The end of the track that has been cut will become

one of the ends of the completed track installation."

4. Using the track sections as your template, hold the track to the ceiling

where it is to be installed and mark the holes on the ceiling for drilling.

• Please note: this process will be easier if you have a second person hold up 1

Installing Ceiling Track is easy. Whether the track is needed for privacy, storage, or workspace, Ceiling Track Sets can

be set up in minutes! Instructions for installing your ceiling track can be found below:

STEP 1:

STEP 3:

STEP 4:

STEP 5:

2. Track sections are 6ft or 3ft long. If the final track length needs to be

shortened, mark the track at the desired cutting point. !

STEP 2: