2. Toro
  3. Tip Switch Kit, TR-34D Trench Roller

Toro Tip Switch Kit, TR-34D Trench Roller Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Tip Switch Kit, TR-34D Trench Roller Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3396-989RevA
TipSwitchKit
TR-34DTrenchRoller
ModelNo.132-7169
InstallationInstructions
WARNING
CALIFORNIA
Proposition65Warning
ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato
causecancer,birthdefects,orreproductiveharm.
InstallingtheTipSwitch
PreparingtheMachine
1.Settheparkingbrake,openthehoodpanels,and
removetherightsidepanel;refertotheOwner’sManual
ofthemachine.
2.Disconnectandremovethebatteryandbatterybracket
(Figure1).
Important:Removethenegativeterminalrst.
Figure1
1.Boltssecuringthebatterybracket
3.Removethe4boltsonpanelholdingtheelectrical
terminalbox(Figure2).
Figure2
1.Bolts
4.Lifttheelectricalterminalboxandremovetheengine
wiringharness(Figure3).
Figure3
1.Enginewiringharness
©2015—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved
*3396-989*A
5.Removethe8boltsontheterminal-boxcover(Figure
4).
Figure4
6.Removetheexistingtipswitchandbracket.
DANGER
Thetipswitchforthemachinecontains
mercury.Intheeventyouneedtoreplace
thispart,contactyourhazardouswaste
facilityforproperdisposaloftheoldpart.To
ndyourlocalhazardouswastefacilitysee
http://earth911.comontheinternet.
Note:Donotdiscardthehardware.
Figure5
1.Existingtipswitch
7.Connectthegreenandblackwiresfromthenewswitch
tothewhiteconnector(Figure6).
Figure6
1.Bolt,washer,andstar
washer
3.Redwire
2.Greenandblackwires
8.Connecttheredwiretoposition15ontheterminal
strip(Figure6).
9.Connectthebatteryandenginewiringharness(Figure
3).
Important:Connectthepositiveterminalrst.
10.Securetheterminalboxtothepanel(Figure2).
11.Startthemachine.
12.SlowlytilttheswitchbyhanduntiltheTILTmessage
displaysontheLEDdisplay.
Note:Theengineshouldstopin3secondsorless
whentheTILTmessagedisplays.
Note:Iftheenginedoesnotstop,checkthewiring
schematictoensurethatthewiringiscorrect.
13.Mountthetipswitchtotheterminalboxusingthe
hardwareremovedinstep6andthewasherandstar
washerincludedinthiskit(Figure6).
14.Securetheterminalboxcovertotheterminalbox
(Figure4).
15.Installthebatterybracket(Figure1).
2
/