2. Toro
  3. Idler Kit, Blower Kit for GrandStand Multi Force Mower

Toro Idler Kit, Blower Kit for GrandStand Multi Force Mower Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Idler Kit, Blower Kit for GrandStand Multi Force Mower Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3425-282RevC
IdlerKit
BlowerKitforGrandStand
®
MultiForceMower
ModelNo.139-1546
InstallationInstructions
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
Nopartsrequired
–
Preparethemachine.
Idlerpulley1
Hex-angeheadbolt
1
Spacer
1
Mountingbracket1
Carriagebolt
2
Nut3
Plate1
Installthekit.
PreparingtheMachine
1.Parkthemachineonalevelsurface.
2.DisengagethePTO,engagetheparkingbrake,
andmovethemotion-controlleversoutwardto
theNEUTRAL-LOCKposition.
3.Shutofftheengineandremovethekey.
©2019—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3425-282*C
InstallingtheKit
1.Securetheidlerpulleytothemountingbracket
usingthehex-angeheadbolt,andspacer
(Figure1).Torquetheboltto37to45N∙m(27
to33ft-lb).
g294691
Figure1
1.Mountingbracket
4.Hex-angeheadbolt
2.Idlerpulley
5.Nut
3.Spacer6.Shoulderbolt
2.Installtheshoulderbolttothemountingbracket
usinganut(Figure1).Torquetheboltto37to
45N∙m(27to33ft-lb).
3.Securethemountingbrackettotheleftmachine
frametube,betweentheplatesweldedtothe
tube,usingtheplate,2carriagebolts,and2
nuts(Figure2).Torquetheboltsto37to45N∙m
(27to33ft-lb).
g293527
Figure2
1.Nut(2)
3.Mountingbracket
2.Plate
4.Carriagebolt
4.Routethebelttotheidlerpulley(Figure3).
Important:Ensurethatthewidesideofthe
beltcontactsthepulleyasshowninFigure3.
Usetheshoulderboltasaguideforthebelt.
g293529
Figure3
1.Shoulderbolt
3.Belt
2.Idlerpulley
2
/