DAVIS 6673 Owner's manual

DAVIS
Brand
DAVIS
Model
6673
Type
Owner's manual

This manual is also suitable for

Davis Instruments, 3465 Diablo Avenue, Hayward, CA 94545-2778 U.S.A. • 510-732-9229 • www.davisnet.com
®
Sensor Mounting Shelf Installation
For more information, see your UV and Solar Sensor User Manual
Components
#10-24 x 7-3/4" Screws
#10-24 Nuts
4" Cable Ties
#10 Lock
Washers
Support
Tubes
#10 Flat
Washers
Place a support tube on each of the outside mounting holes at the front of the rain collector base.
Place a lock washer and a flat washer onto one 7 ¾” screws.
Locate the support tube mounting
holes in the shelf.
Insert the screw through the hole in the shelf, tube, and through the hole in the rain collector
base.
Place a nut in the opening of the hexagonal recess on the underside of the rain collector base.
Turn the screw until the assembly is loosely held together.
Repeat with the second support tube.
On the underside of the shelf, verify that the tops of both support tubes are inside the circular
recesses in the shelf.
Tighten both support tubes.
Holes for Support Tube Screws
Three Holes for Sensor Screws
Three Holes for Sensor Screws
1.
2.
3.
4.
5.
6.
7.
8.
07395.133 Rev. G 9/18/14
#10-24 Nut
Rain Collector
Base
Shelf
Support Tube
#10 Flat Washer
#10 Lock Washer
#10-24 x 7-3/4" Screw
  • Page 1 1

DAVIS 6673 Owner's manual

DAVIS
Brand
DAVIS
Model
6673
Type
Owner's manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents