Laigoo LPM02 Installation guide

Model Number：181002

Put the product on a clean place to get ready to install

×2

撕开保护膜

Instruction:

Please follow the instruction

strictly to ensure the normal use.

Note: Max. Load<11lb/5KG

×2

×1

Open the cover of the plate, insert the pair of baffles

Install the screws with even force

(Do NOT tighten them too much)

Close the cover

Open the 2 covers of the baffles

insert and press the product into the base hard

Tear off the protective film of the adhesive base,

press the product against the wall(avoid gaps between tiles)

Press the adhesive base, then detach the shelf.

Important: Press the base hard, squeeze out bubbles

between the base and the wall by the wrench provided.

Reinstall the shelf, tighten the screws with even force.

Close the 2 covers of the baffles.

Get to use it after vacant for 15 minutes.