Membrane, For Beer Tomorrow
MEMBRANE SOLUTIONS
Membrane Solutions
Contact Us
Toll free 1-866-528-4572
Fax
1-732-412-4040
Address
20021 80th Avenue South, C-4, Kent,
WA 98032
E-mail
Website
www.membrane-solutions.com
EC METER
TDS
&
INSTRUCTIONS
THE INSTRUMENT FEATURES
TDS–CONDUCTIVITY SHIFT
Please remove the protective sleeve before use.
Press the start button and place the electrode into
the test solution.
After the reading stabilizes, press the HOLD button
and remove it from the solution to record the
reading.
After the reading has been completed, turn off the
meter and wipe and dry the electrode off before
inserting it back into the protective sleeve.
AUTOMATIC TEMPERATURE COMPENSATION
Temperature is automatically compensated in
measurement mode.
MAINTENANCE
To keep the electrode clean, insert it in its protective
sleeve. When not using the meter for long periods of
time, please remove the batteries.
WARRANTY
Life-time warranty
Exceptions: product abuse, battery leakage or water
damage of the circuit board.
NOTE
To avoid instrument failure, please follow instrument
instructions.
Avoid heat and direct sunlight.
Please do preventative maintenance and calibrate
the meter frequently with standard buffer solution.
Do not immerse the meter into any liquids.
Lock function: The meter will read and record the
reading.
Automatic 5 minute shut off to save battery life.
Measurement range
TDS: 0-9999ppm
Conductivity: 0-9990μS/cm
Degree Celsius: 0-80°C
Degree Fahrenheit: 32-176°F
Accuracy: + or - 2%
N.W.: 55g
Size: 154 x 30 x 14mm
Press SHIFT button once to choose between TDS
and Conductivity.
TEMPERATURE SHIFT
Press SHIFT button twice to choose between
Celsius and Fahrenheit.
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Hanna Instruments HI2040-01,HI2030-01,HI2020-01 Owner's manual
-
Milwaukee Mi 180 User manual
-
Solaxx NP2060 User manual
-
-
-
Hach Sension 156 User manual
-
-
Myron L M-6530 Owner's manual
-
-
