Moto Shade 163578 User manual

Brand: Moto Shade

Model: 163578

Type: User manual

Attach remaining elastic straps

Layout all parts in preparation for assembly

Long Side

Attach base plates and stretch cables

Note: Fasten the rest of the canopy by working

from side to side to get an even fit. If elastic ball

straps are too loose, you can double wrap them

around the pole.

Note: Fasten cables by stretching downward and under

hook in foot

(18)

Medium 2 Tapered Tube

Short 2 Tapered Tube

Long 1 Tapered Tube

Corners R-rid

Corners I-rid

4 Way CornerG

Canopy

(1)

(34)

(2)

Large Spring Button

Small Spring Button

Elastic Ball Straps

Plastic Foot Pad

Ring

(24)

Assemble center piece for ceiling with

spring buttons

Assemble corners to ceiling structure with

spring buttons

Assemble center piece for ceiling with

spring buttons

Assemble sides connecting to center piece

with spring buttons

Pull canopy over ceiling and fasten corners

with elastic straps

Note: Follow this position (rib-triangle faces inwards).

Note: Place cover over frame while the unit is low

to the ground, secure corners with elastic ball straps,

(see inside corner detail). You will tighten and secure

cover completely after the legs are attached and the

eaves are at arm level.

Note: Tilt the canopy on edge to set up all legs on one side,

then the other.

2 per corner

Moto Shade 163578 User manual

Brand: Moto Shade

Model: 163578

Type: User manual

Download PDF

report

Moto Shade 163578 User manual

Moto Shade 163578 User manual

Other documents