MicroNet SP6052WS Quick Installation Guide

Brand: MicroNet

Model: SP6052WS

Category: Network switches

Type: Quick Installation Guide

P/N: 2300-0512

Quick Installation Guide

48 10/100M+ 4 Gigabit Web Smart Switch

Model No.: SP6052WS

Management Utility

SP6052WS comes with a management utility for discovering

available web smart switches on the network and providing

administrative functions: change password, assign IP address

and upgrade firmware.

Step 1. Install the utility

provided on the

CD and from the

on-screen

instructions to

complete the

installation. Start

the program and

the following

interface will

appear.

Step 1.

Step3. Press <Discover>

to view available

SP6052WS on

the network.

Press <Add Item>

to move the

switch into

monitoring list.

Step 1.

Step 3. Select 'Use the following IP Address' button and then

enter the IP address and subnet mask. Ensure the IP

address and subnet mask are on the same subnet as

the switch. Click on <OK> button to save the setting.

Step 3.

Default Values

IP Address

Subnet Mask

Password

192.168.1.1

255.255.255.0

admin

On the left hand side of the

browser will contain a menu tree

with list of functions. Menu is in

hierarchical structure and opening

the menu will display a sub-menu.

Web-based User Interface

SP6052WS is embedded with http

sever and provides a series of web

pages, which display the configuration and status of the

system. After configuration of IP, the management interface

can be access by entering the IP address of the switch into

the browser.

For detail information of each

function, refer to the user manual.

Specifications

IEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-TX

IEEE 802.3ab 1000BASE-T

IEEE 802.3z 1000BASE-SX/LX

128 KBytes per device

8K entries

48 x 10/100Mbps 100BASE-TX Auto-

MDIX RJ-45 ports

4 x 10/100/1000Mbps 1000BASE-T

Auto-MDIX RJ-45 ports

2 x Combo mini-GBIC slots

IEEE 802.1Q VLAN

IEEE 802.1p Priority Queues

Static Port Trunk

Broadcast Storm Control

Port Mirroring

Port Control

Web-based, Utility

10Mbps: 14,880pps

100Mbps: 148,800pps

1000Mbps: 1,488,000pps

o o

Operating Temperature: 0 - 40 C

Operating Humidity: 10% - 90%

100-240V AC, 50-60Hz Internal

Universal Power Supply

Standards

Buffer Memory

Mac Address Table

Interface

Features

Management

Filtering /

Forwarding Rate

Environment

Power Supply

Web: www.micronet.com.tw ; www.micronet.info

1 2

Introduction

Micronet SP6052WS, 48 10/100M+ 4 Gigabit Web Smart

switch provides 48 ports of 10/100M, 4 ports of 10/100/1000M,

and 2 mini-GBIC slots. It is ideal for environment requiring

high port density and gigabit connectivity. All ports support

auto MDI/MDIX and auto negotiation for data rate which will

provide straight forward installation and upgrade of company's

existing network. The switch also supports various

management functions: Tag-based VLAN, Static Port Trunk,

Port Mirror and web-based management interface.

Package Contents

Prior to the installation of the device, please verify the

following items are in the package:

SP6052WS Web Smart Switch

Quick Installation Guide

Manual CD

Mounting Accessory

AC Power Cord

•

• Utility &

•

Key Features

• 48 x 100BASE-TX Auto-negotiation Fast Ethernet ports

• 4 x 1000BASE-T Auto-negotiation Gigabit Ethernet ports

• 2 x 1000BASE-T Combo mini-GBIC (Auto-Sense) Gigabit

Ethernet for optional mini-GBIC transceiver to extend distance,

share with 2 1000BASE-T ports

• All ports support auto MDI/MDIX, so there is no need to use

cross-over cables or an up-link port

• Half duplex transfer mode for connection speed 10Mbps and

100Mbps

• Full duplex transfer mode for connection speed of 10Mbps,

100Mbps and 1000Mbps

• Store-and-Forward switching scheme capability to support

rate adaptation and ensure data integrity

• Support IEEE 802.1Q VLAN and IEEE 802.1p Priority Queues

• Support Static Port Trunk, Broadcast Storm Control and Port

Mirroring

•

SP6052WS Front View

RESET

PWR

SYS

1 3

2 4

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 48474645444342414039383736353433 49 50 49 50 51 52

LNK/ACT

SP6052WS Web Smart Switch

18 34

20 36

22 38

24 40

26 42

28 44

30 46

32 48

33 35 37 39 41 43 45 47

1000BASE-T

mini-GBIC

50 50 52

49 51

RESET Button

The button is used to reset the equipment to factory default.

LED definition

Status

Operation

LED

System LED

POWER

SYS

10/100M Ethernet TP Port (1 to 48 port)

LINK/ACT

1000BASE-T Port (49 to 52 port)

LINK/ACT

mini-GBIC Port (49 to 50 port)

On/Green

Off

Blink/Green

Off

Power is on

Power is off

Switch is working properly

CPU fails to initiate

On/Green

Blink/Green

Off

Link with remote device is good

Traffic is present

Link is off or bad connection

On/Green

Blink/Amber

Blink/Green

Off

Link with remote device is good

Link is at either 10M or 100M

Traffic is present

Link is off or bad connection

On/Green

Blink/Green

Off

Link with remote device is good

Traffic is present

Link is off or bad connection

Configuration

SP6052WS can be mounted in a 19-inch rack, which can be

placed in a wiring closet with other equipment. Follow the

steps below to configure and set up the gigabit switch.

IP Address Configuration

PC/Notebook must belong in the same IP range and subnet.

Follow the steps below to configure IP settings for LAN PC.

Step 1. In the control panel,

double click on Network

Connections. Double click

on the local area connection

(e.g. LAN). The following

screen will appear.

Step 2. Select 'Internet Protocol

(TCP/IP)', and then click

on the <Properties> button.

The screen will appear to

allow entry of TCP/IP

setting.

Step 1.

Physical Description

MicroNet SP6052WS Quick Installation Guide

Brand: MicroNet

Model: SP6052WS

Category: Network switches

Type: Quick Installation Guide

Download PDF

report

MicroNet SP6052WS Quick Installation Guide

MicroNet SP6052WS Quick Installation Guide

Related papers

Other documents