P/N: 2300-0512
Quick Installation Guide
48 10/100M+ 4 Gigabit Web Smart Switch
Model No.: SP6052WS
6
Management Utility
SP6052WS comes with a management utility for discovering
available web smart switches on the network and providing
administrative functions: change password, assign IP address
and upgrade firmware.
Step 1. Install the utility
provided on the
CD and from the
on-screen
instructions to
complete the
installation. Start
the program and
the following
interface will
appear.
Step 1.
Step 1.
Step 1.
Step 1.
Step 1.
Step 1.
Step 1.
Step 1.
Step 1.
Step 1.
7
Step3. Press <Discover>
to view available
SP6052WS on
the network.
Press <Add Item>
to move the
switch into
monitoring list.
Step 1.
Step 1.
Step 1.
Step 1.
Step 1.
Step 1.
Step 1.
5
Step 3. Select 'Use the following IP Address' button and then
enter the IP address and subnet mask. Ensure the IP
address and subnet mask are on the same subnet as
the switch. Click on <OK> button to save the setting.
Step 3.
Step 3.
Step 3.
Default Values
IP Address
Subnet Mask
Password
192.168.1.1
255.255.255.0
admin
On the left hand side of the
browser will contain a menu tree
with list of functions. Menu is in
hierarchical structure and opening
the menu will display a sub-menu.
Web-based User Interface
SP6052WS is embedded with http
sever and provides a series of web
pages, which display the configuration and status of the
system. After configuration of IP, the management interface
can be access by entering the IP address of the switch into
the browser.
For detail information of each
function, refer to the user manual.
Specifications
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3z 1000BASE-SX/LX
128 KBytes per device
8K entries
48 x 10/100Mbps 100BASE-TX Auto-
MDIX RJ-45 ports
4 x 10/100/1000Mbps 1000BASE-T
Auto-MDIX RJ-45 ports
2 x Combo mini-GBIC slots
IEEE 802.1Q VLAN
IEEE 802.1p Priority Queues
Static Port Trunk
Broadcast Storm Control
Port Mirroring
Port Control
Web-based, Utility
10Mbps: 14,880pps
100Mbps: 148,800pps
1000Mbps: 1,488,000pps
o o
Operating Temperature: 0 - 40 C
Operating Humidity: 10% - 90%
100-240V AC, 50-60Hz Internal
Universal Power Supply
Standards
Buffer Memory
Mac Address Table
Interface
Features
Management
Filtering /
Forwarding Rate
Environment
Power Supply
Web: www.micronet.com.tw ; www.micronet.info
4
1 2
Introduction
Micronet SP6052WS, 48 10/100M+ 4 Gigabit Web Smart
switch provides 48 ports of 10/100M, 4 ports of 10/100/1000M,
and 2 mini-GBIC slots. It is ideal for environment requiring
high port density and gigabit connectivity. All ports support
auto MDI/MDIX and auto negotiation for data rate which will
provide straight forward installation and upgrade of company's
existing network. The switch also supports various
management functions: Tag-based VLAN, Static Port Trunk,
Port Mirror and web-based management interface.
Package Contents
Prior to the installation of the device, please verify the
following items are in the package:
SP6052WS Web Smart Switch
Quick Installation Guide
Manual CD
Mounting Accessory
AC Power Cord
•
•
• Utility &
•
•
3
Key Features
• 48 x 100BASE-TX Auto-negotiation Fast Ethernet ports
• 4 x 1000BASE-T Auto-negotiation Gigabit Ethernet ports
• 2 x 1000BASE-T Combo mini-GBIC (Auto-Sense) Gigabit
Ethernet for optional mini-GBIC transceiver to extend distance,
share with 2 1000BASE-T ports
• All ports support auto MDI/MDIX, so there is no need to use
cross-over cables or an up-link port
• Half duplex transfer mode for connection speed 10Mbps and
100Mbps
• Full duplex transfer mode for connection speed of 10Mbps,
100Mbps and 1000Mbps
• Store-and-Forward switching scheme capability to support
rate adaptation and ensure data integrity
• Support IEEE 802.1Q VLAN and IEEE 802.1p Priority Queues
• Support Static Port Trunk, Broadcast Storm Control and Port
Mirroring
•
•
•
•
•
•
•
SP6052WS Front View
RESET
PWR
SYS
1 3
2 4
5
6
7
8
9
10
11
12
13
14
15
16
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 48474645444342414039383736353433 49 50 49 50 51 52
LNK/ACT
SP6052WS Web Smart Switch
17
18 34
19
20 36
21
22 38
23
24 40
25
26 42
27
28 44
29
30 46
31
32 48
33 35 37 39 41 43 45 47
1000BASE-T
mini-GBIC
49
50 50 52
49 51
RESET Button
The button is used to reset the equipment to factory default.
LED definition
Status
Operation
LED
System LED
POWER
SYS
10/100M Ethernet TP Port (1 to 48 port)
LINK/ACT
1000BASE-T Port (49 to 52 port)
LINK/ACT
LINK/ACT
mini-GBIC Port (49 to 50 port)
On/Green
Off
Blink/Green
Off
Power is on
Power is off
Switch is working properly
CPU fails to initiate
On/Green
Blink/Green
Off
Link with remote device is good
Traffic is present
Link is off or bad connection
On/Green
Blink/Amber
Blink/Green
Off
Link with remote device is good
Link is at either 10M or 100M
Traffic is present
Link is off or bad connection
On/Green
Blink/Green
Off
Link with remote device is good
Traffic is present
Link is off or bad connection
Configuration
SP6052WS can be mounted in a 19-inch rack, which can be
placed in a wiring closet with other equipment. Follow the
steps below to configure and set up the gigabit switch.
IP Address Configuration
PC/Notebook must belong in the same IP range and subnet.
Follow the steps below to configure IP settings for LAN PC.
Step 1. In the control panel,
double click on Network
Connections. Double click
on the local area connection
(e.g. LAN). The following
screen will appear.
Step 2. Select 'Internet Protocol
(TCP/IP)', and then click
on the <Properties> button.
The screen will appear to
allow entry of TCP/IP
setting.
Step 1.
Step 1.
Step 1.
Step 1.
Step 1.
Step 1.
Step 1.
Step 1.
Step 1.
Step 1.
Physical Description
/
