Hampton Bay FB11552B-9D2 Operating instructions

Category
Office & computer chairs
Type
Operating instructions
271_632
Measuring Guide
One-Piece Chair Cushion
Measure the width from side to side, across
the front of the seating area, between the arms
of the chair.
If your chair doesn’t have arms, measure the
widest part of the seat, from edge to edge.
Measure the depth from the front of the
seating area to the back, or where the back
and seat meet.
Add one inch to your measurement to ensure
proper cushion t and maximum comfort.
Measure the height from the top of the chair
down to the back of the seat, or where the
back and seat meet.
Add the seat depth to the back height to get
the total length for a one-piece chair cushion.
Width
1
Seat Depth
2
Back Height
3
Total Length
4
  • Page 1 1

Hampton Bay FB11552B-9D2 Operating instructions

Category
Office & computer chairs
Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI